• 대한치과기공학회지
• /
• 제21권1호
• /
• pp.43-53
• /
• 1999

The mechannical properties and corrosion resistance of alloy added commercially pure titanium for dental implants have been investigated. Ti, To-65Zr, Ti-10.1Ta and Ti-17Sn alloys were melthed in arc furnace and the corrosion resistance of Ti alloys was evaluated by anodic polarization test. The microstructure and mechanical properties of Ti alloy were analysed by optical micrograph. hardness tester and instron. In isothermal test, Ti-10.1Ta and Ti-17Sn alloys exhibited the best oxidation resistance below $1100^{\circ}C$. Ti65Zr, Ti-10.1Ta and Ti-17Sn alloys showed better rockwell hardness compared with commercially pure. Ti As the result of the anodic polarization test in 5%HCl, it 5%HCl, it was known knows that Ti-65Zr, alloy showed a rapid decrease in current density at higher potenial in comparision with other Ti alloys.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.221-222
• /
• 2008

In Crystalline Si solar cells, Anti-Reflection Coating is contribute to improvement in energy conversion efficiency due to decrease of optical loss and recombination owing to surface passivation. Porous Si is formed electrochemical etching that uses chemical solution and anodization etching. So It gives that advantage in rapid process time and without high cost equipment. In this paper, We compare Porous Si with $SiO_2$/SiNx ARC and analyze that by anti-reflection coating.

• Journal of Welding and Joining
• /
• 제22권1호
• /
• pp.43-49
• /
• 2004

Contact tip is located so near to welding arc that it is heated to high temperature during long time welding. In such a situation, tip changes in its microstructure and in turn its mechanical properties. This study was intended to investigate those changes by using simulated heat treatment. As a result of this study, it was confirmed that tip of Cu-P alloy hardened with severe cold deformation lose its initial hardness to a large extent within 60 min due to the occurrence of rapid recrystallization while that of Cu-Cr composition hardened by proper aging treatment can preserve its intial hardness for about 1,000 min or longer. Based on these results, suggested was a guideline that can classify contact tips into two different grades: deformation-hardened type and precipitation-hardened type. Following a guideline, a tip with Cu-Cr composition can be classified into the deformation-hardened type if it is in the over-aged condition. Such a guideline is well described.

• 열처리공학회지
• /
• 제8권1호
• /
• pp.84-88
• /
• 1995

Various heat-treatments were conducted to Ti-48.1at%Al and Ti-48.3at%Al-1.2at%Mn alloys casted by plasma arc melting system. Mechanical properties, microstructure and high temperature oxidizing behaviors of as-casted and heat-treatment alloys were investigated. Ti-48.1Al and Ti-48.3Al-1.2Mn alloys were decreased in strength according to increased of heattreatment temperature. Oxidizing weight gain of Ti-48.1Al alloy which conducted at $1273^{\circ}K$ was linearly increased. In case of adding Mn to alloy, there was no rapid increase of oxidizing weight gain during early time.

• 국제초고층학회논문집
• /
• 제8권1호
• /
• pp.49-56
• /
• 2019

Against the background of the rapid development of the Shanghai Metro network, this paper attempts to establish an analytical approach to evaluate the impact of multiple transport network accessibilities on commercial space use in metro station areas. Ten well-developed metro station areas in central Shanghai are selected as samples. Commercial space floor area and visitors in these areas are collected. Using ArcGIS and Spatial Design Network Analysis, the Shanghai Metro network and road network are modeled to compute diversified transport accessibilities. Evidence from land use and commercial space floor area within a 0-to-500-meter buffer zone of stations is consistent with location and land-use theory: commercial land use is concentrated closer to stations. Correlation analysis suggests that hourly visitors to the shopping mall are mainly influenced by metro network accessibility, while retail stores and restaurants are affected by both metro and pedestrian accessibility.

• Journal of Ceramic Processing Research
• /
• 제20권3호
• /
• pp.276-279
• /
• 2019

New green-emitting Sr4ScAl3O10:Eu2+ phosphor was prepared using a novel melt quenching synthesis method. The temperature of raw materials irradiated with the strong light of the Xe arc-lamp was rose up to about 2273 K, followed by a sharp drop in the temperature after turn off the lamp. This method is a useful tool for rapid screening of novel phosphor materials.

• International journal of advanced smart convergence
• /
• 제10권1호
• /
• pp.216-224
• /
• 2021

Aim of this research was to classify forest types at Wando in Jeonnam Province and develop warm temperate forest management system with application of Remote Sensing and GIS. Another emphasis was given to the analysis of satellite images to compare forest type changes over 10 year periods from 2009 to 2019. We have accomplished this study by using ArcGIS Pro and ENVI. For this research, Landsat satellite images were obtained by means of terrestrial, airborne and satellite imagery. Based on the field survey data, all land uses and forest types were divided into 5 forest classes; Evergreen broad-leaved forest, Evergreen Coniferous forest, Deciduous broad-leaved forest, Mixed fores, and others. Supervised classification was carried out with a random forest classifier based on manually collected training polygons in ROI. Accuracy assessment of the different forest types and land-cover classifications was calculated based on the reference polygons. Comparison of forest changes over 10 year periods resulted in different vegetation biomass volumes, producing the loss of deciduous forests in 2019 probably due to the expansion of residential areas and rapid deforestation.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.68-71
• /
• 2004

Hsinchu Science Park, one of the most productive electronic sites in the world, is located at Hsinchu County. Hsinchu County Government is entitled for daily management to pursue the objectives of making every county citizen prosperous. Several web-based management information systems have been developed for county management and were widely implemented. However, forest management is one of several tasks which need development of web-based geographic information systems. The objectives of this paper are to develop GIS for forest management at Hsinchu County in order to solve problems encountered in the rapid changing circumstance. The objectives of forest management at Hsinchu County have been changed a little bit in the last decade. Now, it mainly focuses on public and private forest, tree planting, wind break forest management, and plane forest planting. The major ingredients of GIS for forest management are user-friendly, task-oriented, and direct linking to the existing GIS at Hsinchu County. AreIMS and ArcGIS were used for web-based GIS. Field operations of forest management depend on PDA and GPS such that ArcPAD is implemented both on personal computers and PDA. Computer programming is required for database management and development of application modules in forest management. Color digital orthophoto maps at scale of 1:5000 provide very useful background information. Forest management at Hsinchu County now is operated in an efficient way that GIS, remote sensing, GPS and PDA are working smoothly.

• 전자공학회논문지CI
• /
• 제38권5호
• /
• pp.58-64
• /
• 2001

현재 많은 정보들이 비디오 데이터로 전송 또는 저장되고 있으며 고성능 PC의 보급과 internet과 같은 통신망의 대중화로 이런 비디오 데이터는 급속도로 증가하고 있다. 본 논문에서는 이런 비디오 데이터의 검색을 위하여 비디오 스트립을 분석하여 shot을 찾아내고 이들 중 key frame을 찾는 방법에 대하여 연구하고 이로서 사용자의 질의에 부합하는 비디오를 검색한다. 본 논문에서는 shot 경계 검출을 위해 객체의 움직임에 강인하면서 shot 내에서의 칼라의 변화에 둔감한 새로운 feature를 제안하고, shot frame에서 구한 각 feature들의 통계적 특성을 이용하여 스트립의 특징에 따라 weight를 부가하여 구해진 characterizing value의 시간 변화량을 구한다. 구해진 변화량의 local maxima와 local minima는 비디오 스트림에서 각각 가장 특정적인 frame과 평균적인 frame을 나타낸다. 이 순간의 short frame을 구함으로서 효과적이고 빠른 시간 내에 key frame을 추출한다. 추출되어진 key frame에 대하여 원 영상을 복원한 후, 색인을 위하여 다수의 parameter를 구하고, 사용자가 질의한 영상에 대해서 이들 parameter를 구하여 key frame들과 가장 유사한 대표영상들을 검색한다. 실험결과 일반적인 방법보다 더 나은 결과를 보였고, 높은 검색율을 보였다.

• 한국의학물리학회지:의학물리
• /
• 제30권4호
• /
• pp.94-103
• /
• 2019

Purpose: To evaluate the clinical feasibility of knowledge-based planning (KBP) for volumetric-modulated arc radiotherapy (VMAT) in spine stereotactic body radiotherapy (SBRT). Methods: Forty-eight VMAT plans for spine SBRT was studied. Two planning target volumes (PTVs) were defined for simultaneous integrated boost: PTV for boost (PTV-B: 27 Gy/3fractions) and PTV elective (PTV-E: 24 Gy/3fractions). The expert VMAT plans were manually generated by experienced planners. Twenty-six plans were used to train the KBP model using Varian RapidPlan. With the trained KBP model each KBP plan was automatically generated by an individual with little experience and compared with the expert plan (closed-loop validation). Twenty-two plans that had not been used for KBP model training were also compared with the KBP results (open-loop validation). Results: Although the minimal dose of PTV-B and PTV-E was lower and the maximal dose was higher than those of the expert plan, the difference was no larger than 0.7 Gy. In the closed-loop validation, D_1.2cc, D_0.35cc, and D_mean of the spinal cord was decreased by 0.9 Gy, 0.6 Gy, and 0.9 Gy, respectively, in the KBP plans (P<0.05). In the open-loop validation, only D_mean of the spinal cord was significantly decreased, by 0.5 Gy (P<0.05). Conclusions: The dose coverage and uniformity for PTV was slightly worse in the KBP for spine SBRT while the dose to the spinal cord was reduced, but the differences were small. Thus, inexperienced planners could easily generate a clinically feasible plan for spine SBRT by using KBP.