• Archives of design research
• /
• v.11 no.1
• /
• pp.237-244
• /
• 1998

Rapid prototyping is an efficient method to evaluate the usability of electric home appliances. However, the use of rapid prototyping method in usability tests has not been sufficiently validated. The purpose of this study was to validate computer-generated prototypes whether they can replace real products in usability tests. The control-display panel of a refrigerator was selected for this study. Sixteen female subjects participated in a between-subjects experiment: Eight subjects of them used the real refrigerator while others used the computer-generated prototype of the refrigerator. The difference between the refrigerator and the prototype was analyzed in terms of task failure rate, task completion time, and the number of buttons pressed for three typical tasks: clock setting, selecting an operation mode for refrigerating room, and selecting an rapid freezing mode. The results of a non-parametric statistical test showed that the prototype was not significantly different from the real refrigerator. Therefore, the rapid prototyping technique can be applied to the usability tests for the simple electric home appliances such as the refrigerator.

• Journal of Embryo Transfer
• /
• v.29 no.3
• /
• pp.241-248
• /
• 2014

This study was carried out to evaluate the effects of embryonic stage, cryoprotectant, and freezing-thawing method on the rates of survival and development of the cryopreserved mouse early embryo and finally to establish the cryopreservation method of surplus embryos obtained during assisted reproductive technology (ART). Two to eight cell embryos were obtained from oviducts of mated $F_1$ hybrid female mice superovulated by PMSG and hCG. Two-step EG, DMSO and 4-step EG, DMSO were used as cryoprotectant and dehydration and rehydration method of embryos, and slow-cooling or rapid-cooling method was used as frozen program. The survival rates of embryos were measured after thawing and rehydration, and the developmental rates of embryos were compared and observed during culturing embryos for 24, 48, 72, 96 hrs. As for the survival and development rates of embryos according to embryonic stage, the survival rate of 2 cell stage in EG and DMSO was significantly higher than 4~8 cell (65.4% versus 61.2%, 81.1% versus 72.5%) (p<0.01, p<0.01), but the development rates of 4~8 cell embryos in EG and DMSO were significantly higher than 2 cell embryos for whole culture period (p<0.01) and the development rates of 4~8 cell embryos in EG were significantly higher than 2 cell embryos in DMSO (p<0.01). As for the survival and development rates of embryos according to cryoprotectant, the survival rate of 2 cell embryo in DMSO was significantly higher than that in EG(77.0% versus 64.4%) (p<0.01), whereas the development rate of embryos was not differ till 24 hrs. The development rate from morular to hatching blastocyst, however, was sinificantly higher in EG than in DMSO during 48 hr (p<0.01). The survival rate of 4~8 cell embryo was 62.5% in EG and 73.3% in DMSO. The development rates of embryo in EG were significantly higher for whole culture periods (p<0.01, 0.05). In respect to the effect of freezing and thawing program on the survival and development rates of embryos, method of slow cooling and rapid thawing was more effective than that of rapid cooling and rapid thawing. The survival rate of embryo in 2 cell stage was higher than in 4~8 cell stage, and EG appears more effective cryoprotectant than DMSO because EG showed better development rates of embryos in 2 and 4~8 cell stage. Moreover, slow cooling and rapid thawing method was considered as the best cryopreservation program.

• International Journal of Highway Engineering
• /
• v.17 no.3
• /
• pp.85-95
• /
• 2015

PURPOSES : Recently, bonded concrete overlay has been used as an alternative solution in concrete pavement rehabilitation since its material properties are similar to those of the existing concrete pavements. Deteriorated concrete pavements need rapid rehabilitation in order to prevent traffic jams on Korean expressways. Moreover, speedy and effective repair methods are required. Therefore, the use of bonded concrete overlay with ultra-rapid hardening cement has increased in an effort to reopen promptly the expressways in Korea. However, mobile mixer is required for ultra-rapid hardening cement concrete mixing in the construction site. The use of mobile mixer causes various disadvantages aforementioned such as limitation of the construction supply, open-air storage of mixing materials, increase in construction cost, and etc. In this study, therefore, hydration accelerator in-situ mixing on polymer modified concrete produced in concrete plant is attempted in order to avoid the disadvantages of existing bonded concrete overlay method using ultra-rapid hardening cement. METHODS : Bonded concrete overlay materials using ultra-rapid hardening cement should be meet all the requirements including structural characteristics, compatibility, durability for field application. Therefore, This study aimed to evaluate the application of hydration accelerator in-situ mixing on polymer modified concrete by evaluating structural characteristics, compatibility, durability and economic efficiency for bonded concrete overlay. RESULTS : Test results of structural characteristics showed that the compressive, flexural strength and bond strength were exceed 21MPa, 3.15MPa and 1.4MPa, respectively, which are the target strengths of four hours age for the purpose of prompt traffic reopening. In addition, tests of compatibility, such as drying shrinkage, coefficient of thermal expansion and modulus of elasticity, and durability (chloride ions penetration resistance, freezing-thawing resistance, scaling resistance, abrasion resistance and crack resistance), showed that the hydration accelerator in-situ mixing on polymer modified concrete were satisfied the required criteria. CONCLUSIONS : It was known that the hydration accelerator in-situ mixing on polymer modified concrete overlay method was applicable for bonded concrete overlay and was a good alternative method to substitute the existing bonded concrete overlay method since structural characteristics, compatibility, durability were satisfied the criteria and its economic efficiency was excellent compare to the existing bonded concrete overlay methods.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.39-45
• /
• 2017

In this study, permeable repair materials mainly composed of silicate - based inorganic materials(SIM), which are easily available domestically, were prepared as a basic study for the development of permeable repair materials using SIM. SIM were compared and examined for their performance as repair materials by selecting a product group which has many cases of use in foreign countries. The SIM used were mainly composed of sodium, potassium and lithium silicate. Performance evaluation of SIM was performed by absorption and penetration, compression and adhesion, rapid chloride ion penetration, rapid freezing and thawing, and chemical resistance test. According to the test results, SIM showed effective performance in all areas, mainly because SIM permeates into the interior of the capillary and has a dense internal microstructure. Therefore, it can be used variously to improve the durability of concrete based on the results of this experiment.

• Clinical and Experimental Reproductive Medicine
• /
• v.18 no.1
• /
• pp.81-87
• /
• 1991

There studies were carried for evaluation of the efficiency of freezing of hamster oocytes for use in a human sperm penetration assay. The hamster oocytes fully equilibrated in various cryoprotectant agents and inseminated with human sperm. After insemination with hamster oocytes, there was no difference in penetrated rates. Cumulus free oocytes equilibrated in 1.5M various cryoprotective agents and slowely cooled to temperature $-30^{\circ}C$ before rapid cooling and storage in nitrozen tank. After rapid thawing, survival rates of frozen oocytes according to cryo-protective agents were examined and the human sperm penetration assay with zona free hamster oocytes was conducted. 1. Survival rates of oocytes after cryoprotectants exposure have no significant difference (range 88-91%) and peneration rate was 51.1%. 2. Recovery and survival rate of frozen-thawed oocytes were 85.1 and 66.8%. There was no significant difference on cryoprotective agents. 3. Penetration rates of the frozen-thawed and intact oocytes were 69.0 and 77.0%, respectively. 4. Hamster oocytes cryopreservation provides a convenient way of supplying and trans-porting hamster oocytes for the assessment of the fertilizing potential of human spermatozoa.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.12
• /
• pp.1716-1721
• /
• 2006

The present study was conducted to observe the effect of osmolality of glycerolated TEST-yolk glycerol extenders on post-thawing sperm kinematics of ram spermatozoa of the native Malpura breed maintained in a semi-arid tropical environment. Good quality semen obtained from adult rams was pooled, split and diluted to 1,000 million spermatozoa per ml in complete TEST-yolk-glycerol extenders of 900, 1,200, 1,500 and 1,800 mOsm/kg osmolality. Diluted semen samples were loaded in 0.25 ml straws and cooled down to $-125^{\circ}C$ freezing temperature at the rate of $-25^{\circ}C$ per minute under controlled conditions before plunging into liquid nitrogen for storage. The thawing of straws was performed at $50^{\circ}C$ in a water bath for 10 seconds and sperm kinematics of the frozen-thawed spermatozoa were assessed by a computer-assisted sperm analysis technique. Osmolality of diluent had no significant effect on post-thawing % motility, % rapid, % medium and % slow moving frozen-thawed spermatozoa but significantly (p< 0.05) affected the % linearity and % straightness. The post-thawing % motility and % rapid motile spermatozoa were highest in samples extended in diluent of 1,500 mOsm/kg osmolality and lowest in 900 mOsm/kg. The curvilinear velocity of spermatozoa was significantly (p<0.05) higher for samples extended in 1,800 mOsm/kg, compared to those in 900 and 1,200 mOsm/kg, but the effect was not significantly different to those extended in diluent of 1,500 mOsm/kg osmolality. The study indicated that ram spermatozoa could tolerate a wide osmolality range for dilution in the complete TEST-yolk-glycerol extender for their cryosurvival. The highest recovery of motile spermatozoa following thawing was achieved in samples extended in the TEST-yolk-glycerol diluent of 1,500 mOsm/kg osmolality.

• International Journal of Highway Engineering
• /
• v.4 no.2 s.12
• /
• pp.1-8
• /
• 2002

Latex modified concrete(LMC) became to be applied as a new material for newly constructed bridge deck overlays in Korea due to its excellent bond strength, flexural strength and impermeability against water and chloride. However, it could not be adopted at repair job site because of its long curing time required. Thus, a research on latex modified concrete with rapid-setting cement(RSLMC) is necessary if it could develope the sufficient strength for early opening to traffic. This study focused on the durability of latex modified concrete with rapid-setting cement mainly on water permeable resistance and freeze-thaw resistance. The main experimental variables were latex contents(0, 5, 10, 15 and 20%) and antifoamer contents (0, 1.6, 3.2, 4.8 and 6.4%). Test results show that the permeability of RSLMC is very low indicating below 100 coulombs at 15% of latex contents at all antifoamer contents. The freeze-thaw resistance of RSLMC maintains above 90% of relative dynamic modulus at 3.2% of antifoamer content until 300 freezing-thawing cycles.

• Korean Journal of Animal Reproduction
• /
• v.23 no.3
• /
• pp.221-227
• /
• 1999

Successful cryopreservation of bovine immature oocytes can increase availably of oocytes for the in vitro fertilization or nuclear transfer. However, it was not reported successful development to the blastocyst stage following in vitro fertilization of cryopreserved bovine immature oocytes. The objective of this study was to determine the incidence of survival, meiotic maturation, fertilization and in vitro development of cryopreserved bovine immature by ultra rapid cooling methods. The oocytes were adversely affected by brief exposure to EFS40 solution in electron microscope grids and plunged directly into liquid nitrogen. After such ultra-rapid cooled immature oocytes were warmed, 78% of oocytes were matured to the metaphase II stage, 50% of oocytes were fertilized after insemination, and 5% of oocytes were developed to the blastocyst stage. Different sodium concentration of sodium ion in the freezing medium did not affect survival, maturation, fertilization and in vitro development of cryopreserved oocytes. These results suggested that immature bovine oocytes can be cryopreserved by ultra-rapid cooling methods.

• Food Science of Animal Resources
• /
• v.34 no.1
• /
• pp.115-121
• /
• 2014

This study explored the effects of water or brine (2% NaCl, w/v) immersion thawing combined with ultrasound treatment (40 kHz, 150 W) on the quality characteristics of pork. Ultrasound treatment of pork was conducted in two cold media (at $4^{\circ}C$), water and 2% (w/v) brine, respectively. Because the ultrasound treatment caused temperature increase in the media from $4^{\circ}C$ to $16^{\circ}C$, the qualities of pork thawed by ultrasound were compared with those thawed by immersion either in water or brine where the temperature was being maintained at either $4^{\circ}C$ (low temperature control) or $17^{\circ}C$ (high temperature control). The ultrasound treatment resulted in rapid thawing of pork where the thawing rate was similar to those thawed in the $17^{\circ}C$ media. For quality characteristics, ultrasound-treated pork in brine had an advantage of less cooking losses when comparing to the control. In particular, ultrasound treatment in brine exhibited the lowest shear force (or highest tenderness) among the freezing/thawing treatments. Although the ultrasound processing in brine caused discoloration of the pork, this thawing technique had potential to be applied as a commercial thawing technology for frozen foods.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.6 no.3
• /
• pp.41-49
• /
• 2015

The repair of manhole raise has been caused much construction times and disruption of traffic flow, serious environmental pollution from crushed construction wastes, and budget waste due to the repeated repair construction works. In order to overcome such problems, we have developed the new manhole repairing composite structures by using a glass fiber-reinforced polymer (GFRP) pipe, which can raise manhole to the regular height of the overlayed road pavement with rapid construction and minimum traffic jams. This environmental-friendly technology is method completed by the methyl methacrylate monomer (MMA) double wide flanged GFRP pipe composite structures in order to raise manhole to the regular height. In this paper, two kinds of the compressive strength tests of MMA mortar composites were conducted and evaluated by a general compressive strength test, and compressive strength test after freezing-thawing resistance test. It was found that this MMA mortar composites will be used for the application of the double wide flanged GFRP pipe composite structures.