• 한국물환경학회지
• /
• 제30권3호
• /
• pp.329-339
• /
• 2014

This study aims to estimate chlorophyll-a concentration in rivers using multi-spectral RapidEye imagery and Spectral Mixture Analysis (SMA) and assess the applicability of SMA for multi-temporal imagery analysis. Comparison between images (acquired on Oct. and Nov., 2013) predicted and ground reference chlorophyll-a concentration showed significant performance statistically with determination coefficients of 0.49 and 0.51, respectively. Two band (Red-RE) model for the October and November 2013 RapidEye images showed low performance with coefficient of determinations ($R^2$) of 0.26 and 0.16, respectively. Also Three band (Red-RE-NIR) model showed different performance with $R^2$ of 0.016 and 0.304, respectively. SMA derived Chlorophyll-a concentrations showed relatively higher accuracy than band ratio models based values. SMA was the most appropriate method to calculate Chlorophyll-a concentration using images which were acquired on period of low Chlorophyll-a concentrations. The results of SMA for multi-temporal imagery showed low performance because of the spatio-temporal variation of each end members. This approach provides the potential of providing a cost effective method of monitoring river water quality and management using multi-spectral imagery. In addition, the calculated Chlorophyll-a concentrations using multi-spectral RapidEye imagery can be applied to water quality modeling, enhancing the predicting accuracy.

• 한국환경농학회지
• /
• 제34권3호
• /
• pp.210-216
• /
• 2015

BACKGROUND: In korea, sweet persimmon(Diospyros kaki) cultivation is front to abiotic stresses such as frost damage at fruit maturing stage. The cold and rapid freezing stresses are most damaging to fruit production which is most actively progressed in late fall. This study was performed to evaluate the validity of chlorophyll fluorescence imaging(CFI) technology to determine the degree of frost damage in sweet persimmon fruits. METHODS AND RESULTS: The sweet persimmon fruits were measured separately for each treatment(15, 30, 60 minutes) at 24 hours after treatment(HAT) rapid freezing. A CFI FluorCam (FC 1000-H, PSI, Czech Republic) was used to measure the fluorescence images of the fruits. In rapid freezing for 15 minutes, photochemical parameters were not changed. However, in rapid freezing for 30 and 60 minutes, photochemical parameters were lowered. Especially, $F_m$, $F_v$, $F_v/F_m$ and ${\Phi}PSII$ values were declined under rapid freezing. CONCLUSION: In our study, it was clearly indicated that the rapid freezing could be a stress in sweet persimmon fruits. The CFI analysis and its related parameters are applicable as a rapid assessing technique for the determination of frost damage.

• Journal of Korean Medical Science
• /
• 제33권46호
• /
• pp.304.1-304.7
• /
• 2018

Background: The Republic of Korea has a very low prevalence of human immunodeficiency virus (HIV) infection, but the number of new HIV diagnoses has steadily risen, strongly indicating a large number of undetected HIV infections. Thus, it is important for Korean public health authorities to adopt and encourage cost-effective HIV detection tools, such as rapid HIV screening tests. In this study, we aimed to evaluate the cost-effectiveness of enzyme-linked immunosorbent assays (ELISA) and rapid tests in a public health center (PHC) setting. Methods: We developed a decision analytic model to assess the per-examinee cost and the cost-effectiveness of identifying HIV patients in a PHC setting using two HIV testing strategies: conventional HIV screening by ELISA versus rapid HIV testing. Analysis was performed in two scenarios: HIV testing in an average-risk population and in a high-risk population. Results: Compared to the ELISA, the rapid test was cost-saving and cost-effective. The per-examinee cost was USD 1.61 with rapid testing versus USD 3.38 with ELISA in an average-risk population, and USD 4.77 with rapid testing versus USD 7.62 with ELISA in a high-risk population. The cost of identifying a previously undiagnosed HIV case was USD 26,974 with rapid testing versus USD 42,237 with ELISA in an average-risk population, and USD 153 with rapid testing versus USD 183 with ELISA in a high-risk population. Conclusion: Rapid testing would be more cost-effective than using conventional ELISA testing for identifying previously undiagnosed HIV-infected cases in Korea, a country with extremely low HIV prevalence.

• 복식
• /
• 제55권5호
• /
• pp.55-64
• /
• 2005

The concern with three-dimensional measurement has been growing in recent years. And over the last few years, several studies have been made on three-dimensional measurement. Some of the studies using a three-dimensional measurement have focused on type of form of human body and evaluation of fitness. But there has been no study about applications of three-dimensional measurement system for shape analysis. So, the purpose of this study was to investigate about application of three-dimensional mea-surement system lot shape analysis. The instrument and tools for three-dimensional measurement was Whole Body 3D scanner(model name: Exyma-WBS2H). Analysis program used in experiment is Rapid Form 2004 PPI (INUS technology, Int, Korea). The following results were obtained; 1. The point data using three-dimensional measurement system built 3D model. 2. The three-dimensional data were used to analyze length and curvature of shape. 3. The shape using three-dimensional measurement system could be used in variety field.

• International Journal of Concrete Structures and Materials
• /
• 제5권2호
• /
• pp.133-137
• /
• 2011

In this study, a physical and chemical properties analysis was conducted for PCSP to evaluate properties of its materials and, for comparison purpose, was also conducted for CSP. The result of experiment confirmed improvement of iron recovery rate due to introduction of rapid water-cooling equipment and greater density of exterior and interior structure through SEM observation and porosity measurement. Also, SEM, XRD and DSC-TGA analysis showed that content of f-CaO in PCSP was minuscule so it was decided that problems of material stability including f-CaO-caused bulging failure, which has been problematic, can be solved.

• 한국동물학회지
• /
• 제26권2호
• /
• pp.95-106
• /
• 1983

Drosophila melanogaster의 Oregon-R 계통과 lethal free 집단을 대상으로 connected test tube apparatus를 사용하여 보행행동에 관한 rapid와 slow 행동을 방향성도태의 방법으로 15세대 동안에 걸쳐 도태하였다. 한편 10세대째부터 natural selection을 행하여 유전적 효과를 분석하였다. 1. 보행행동의 rapid와 slow 성질은 초기세대에서부터 뚜렷한 도태효과를 나타내어 제 7세대 이후에 각각 selection plateau에 달하였다. 2. 방향성 도태를 10세대 동안 실시한 후 realized heritability를 계산한 결과 rapid 성질은 $9\\sim14%$, slow 성질은 $11\\sim16%$로서 rapid행동보다 slow 행동의 유전율이 다소 높게 나타났다. 3. Rapid 성질을 지배하는 유전자와 slow 성질을 지배하는 유전자의 우열관계를 밝히기 위한 hybridization 실험결과 slow 유전자가 rapid 유전자에 대하여 partial dominance의 효과가 있었다. 4. 10세대 동안에 걸쳐 방향성 도태를 실시한 후 natural selection을 5세대 동안 실시한 결과 rapid 성질은 단 5세대만에 neutral의 상태 (6.5)로 복원되었으나 slow 성질은 모집단의 보행지수와 비교하여 전혀 변화가 없었다. 실험결과로 미루어 rapid와 slow 형질은 polygenic system에 의하여 control 되는 양적 형질임을 알았다. 한편 rapid 유전자는 natural selection에 의한 homeostasis의 효과가 있으나 slow 행동은 소수의 major gene에 의하여 지배되는 것을 알았다.

• 대한원격탐사학회지
• /
• 제27권3호
• /
• pp.303-314
• /
• 2011

Surface albedo is an important parameter of the surface energy budget, and its accurate quantification is of major interest to the global climate modeling community. Therefore, in this paper, we consider the direct solution of kernel based bidirectional reflectance distribution function (BRDF) models for retrieval of normalized reflectance of high resolution satellite. The BRD effects can be seen in satellite data having a wide swath such as SPOT/VGT (VEGETATION) have sufficient angular sampling, but high resolution satellites are impossible to obtain sufficient angular sampling over a pixel during short period because of their narrow swath scanning when applying semi-empirical model. This gives a difficulty to run BRDF model inferring the reflectance normalization of high resolution satellites. The principal purpose of the study is to estimate normalized reflectance of high resolution satellite (RapidEye) through BRDF components from SPOT/VGT. We use semi-empirical BRDF model to estimated BRDF components from SPOT/VGT and reflectance normalization of RapidEye. This study used SPOT/VGT satellite data acquired in the S1 (daily) data, and within this study is the multispectral sensor RapidEye. Isotropic value such as the normalized reflectance was closely related to the BRDF parameters and the kernels. Also, we show scatter plot of the SPOT/VGT and RapidEye isotropic value relationship. The linear relationship between the two linear regression analysis is performed by using the parameters of SPOTNGT like as isotropic value, geometric value and volumetric scattering value, and the kernel values of RapidEye like as geometric and volumetric scattering kernel Because BRDF parameters are difficult to directly calculate from high resolution satellites, we use to BRDF parameter of SPOT/VGT. Also, we make a decision of weighting for geometric value, volumetric scattering value and error through regression models. As a result, the weighting through linear regression analysis produced good agreement. For all sites, the SPOT/VGT isotropic and RapidEye isotropic values had the high correlation (RMSE, bias), and generally are very consistent.

• 대한공간정보학회지
• /
• 제22권1호
• /
• pp.71-79
• /
• 2014

많은 연구들은 저해상도 위성영상을 이용하여 불투수면을 생성하며, 광역적인 객체 단위의 불투수면을 생성하는 데에 효율적인 성과를 이루지 못하고 있는 실정이다. 본 논문에서는 RapidEye 위성영상을 활용한 객체 기반의 불투수면 생성 기법을 제안하였으며, 이를 실험지역에 적용하고자 하였다. 분광반사율로 변환된 RapidEye 위성영상을 활용하여 추가적인 밴드를 생성하였으며, 훈련자료를 이용하여 그림자 및 수계 클래스를 추출하였다. 해당 클래스를 제외한 나머지 클래스들은 환경부의 중분류 토지피복지도와 분광혼합분석 모델을 활용하여 피복단위의 불투수 비율 영상을 생성하였다. 참조자료와의 정량적 비교평가를 통하여 본 연구에서 적용한 불투수면 생성 방법의 효용성을 검증하였다.

• 소성∙가공
• /
• 제22권1호
• /
• pp.48-53
• /
• 2013

As the adoption of injection molding technology increases, injected-molded optical products require higher dimensional accuracy and optical stability than ever before. In the present study, four kinds of molding methods, i.e., conventional injection molding (CIM), injection/compression molding (ICM), rapid heat and cooling the mold(RHCM) and rapid injection/compression molding (RICM) were selected in order to investigate the optical anisotropy of a 7 inch Light Guide Plate(LGP) by examining the gap-wise distribution of birefringence and the extinction angle. The results indicate that the compression process can decrease flow-induced birefringence over the whole region and that rapid heating can decrease the birefringence level better than conventional molding. In addition, for the combination of compression and rapid heating a reversal flow was detected from the distribution of the extinction angle near the gate.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.549-550
• /
• 2009

최근 공기단축에 대한 필요성이 증대되고 있음에 따라 공기단축기술에 대한 연구가 활발히 이루어지고 있다. 새로운 공기단축기술이 개발되어도 실제로 현장에 적용되기가 어려운 실정인데 이는 총체적인 공기단축 저해요인에 대한 분석이 미흡하기 때문이다. 따라서 실제 공사현장의 공기단축을 위한 저해요인을 파악하고자 설문조사를 실시하였다.