• 열처리공학회지
• /
• 제10권3호
• /
• pp.198-208
• /
• 1997

The-steady-state creep mechanism and behavior of Zircaloy-4 used as cladding materials in PWR have been investigated in air environment over the temp, ranges from 600 to $645^{\circ}C$ and stress ranges from 4 to $7kg/mm^2$. The stress exponents for the creep deformation of this alloy, n were decreased 4.81, 4.71, 4.64, and 4.56 at 600, 615, 630 and $645^{\circ}C$, respectively; the stress exponents decreased with increasing the temperature and got closer to about 5. The apparent activation energies, Q, were 62.1, 60.0, 57.9 and 55.4 kcal/mole at stresses of 4, 5, 6, $7kg/mm^2$, respectively; the activation energies decreased with increasing the stress and were close to those of volume self diffusion of Zr in Zr-Sn-Fe-Cr system. In results, it can be considered that the creep deformation for Zircaloy-4 was controlled by the dislocation climb over the ranges of this experimental conditions. Larson-Miller parameter, P, for the crept specimens was obtained as P=(T+460)(logt,+23). The failure plane observed by SEM slightly showed up intergranular fracture at this experiment ranges. However, it was essentially dominated by the dimple phenomenon, which was a characteristics of the transgranular fracture.

• Tribology and Lubricants
• /
• 제32권6호
• /
• pp.195-200
• /
• 2016

This study examines the wear behavior of mild steel pins mated against alloyed tool steel discs in a pin-on-disc type sliding test machine and provides specific clarification regarding the effects of disc hardness on the wear behavior of a mating mild steel pin. The analysis confirms these effects through the observation of differences in the wear rates of the mild steel pins at low sliding speed ranges. These differences occur even though the hardness of the mating disc does not affect the wear characteristic curve patterns for the sliding speeds, regardless of the wear regime. In the running-in wear regime, increasing the hardness of the mating disc results in a decrease in the wear rates of the mild steel pins at low sliding speed ranges. However, in the steady-state wear region, the wear rate of a pin mated against the 42DISC is greater than the wear rate of a pin mated against the 30DISC, which has a lower hardness value. This means that the tribochemical reactivity of the mating disc, which is based on hardness value, influences the wear behavior of mild steel at low sliding speed ranges. In particular, oxides with higher oxygen contents, such as $Fe_2O_3$ oxides, form predominantly on the worn surface of the 42DISC. On the contrary, the wear behavior of mild steel pins at high sliding speed ranges is nearly unaffected by the hardness of the mating disc.

• 한국정보처리학회논문지
• /
• 제7권2호
• /
• pp.365-372
• /
• 2000

프랙탈 영상 압축(Fractral Image Compression:FIC)의 진화 계산(Evolution Computation)을 이용한 영상 분할(Image Partition)을 소개한다. 프랙탈 영상 압축에서 지역(Ranges)의 영상 분할은 꼭 필요하다[1]. 프랙탈 영상 압축은 쉽고 빠르게 복원된다는 장점을 갖는 데 비해 반복적인 프랙탈 변환의 적용으로 많은 계산량을 필요로 한다는 단점을 가지고 있다. 위와 같은 문제점을 해결하기 위한 방법으로 영상 분할을 하는데 있어 진화 계산을 적용하는 것에 대해 제안한다. 치역 영상(Ranges Image)은 작은 사각(Square) 영상 블록들의 결합된 집합으로 구성할 수 있다. 모집단을 구성하는 하나의 $N_p$는 분할되어진 하나의 코드들이다. 진화 계산에서 각각의 구성은 두 개의 이웃하는 치역은 제외하고 그들의 부모(Parent)로부터 분할을 상속받은 자식 $\sigma$를 생성한다. 자손들의 최적의 영상은 콜라주 정리(Collage Theorem)에 기초를 둔 다음 세대 모집단을 위해 선택되어지고 처리된다. 최적의 영상은 영상 데이터에 포함된 중복성을 포함함으로서 적은 저장 공간을 차지하고 속도 문제에 있어서 효율적이고 영상의 화질에 있어서 다른 부호화를 사용한 기법보다 우수한 성능을 갖는다. 멀티미디어 영상 처리(Multimedia Image Processing)의 진화 계산을 이용한 프렉탈 영상 압축은 영상의 복원과 영상의 질, 고 압축률을 요하는 동영상의 적용등의 많은 분야에 적용된다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
• /
• pp.107-109
• /
• 2014

Through the economic development, people enjoying the camping and demand of camping goods are increasing since they have free time. So they use portable butane gas range outdoor. In addition to that, many restaurants that offer hotpot or meat in Korea use portable butane gas ranges for their convenience. But 19% of gas accidents are using portable butane gas range, 13.7% of them are using oversized cookware. Despite the high accident rate, there is no safety standards about portable butane gas range using oversized cookware. Therefore we conducted to measure temperature and pressure of portable butane gas ranges for reforming safety standards. As a result. we confirmed relation between bottom temperature of the portable butane gas barrel and pressure of the butane gas. Also we confirmed that portable butane gas ranges operate safely when bottom temperature of the portable butane gas barrel is bellow $50^{\circ}C$.

• 한국소음진동공학회논문집
• /
• 제21권11호
• /
• pp.1005-1012
• /
• 2011

Diverse sports are appearing due to the enhanced quality of life and improved cultural standards of the present society. In particular, as golf gains greater popularity from the public, many golf ranges are being constructed near residential areas. However, the hitting noise generated by golf disrupt the pleasant living environment of neighboring residents to generate strong disputes related with noise. In this perspective, this study analyzed the characteristics and dispersion of sound pressure level according to the frequency of hitting noises generated in golf driving ranges and used this data to predict the range of effect through computer simulation. Thus, it is stipulated that these research results can be used as useful data for establishing effective plans in the future during civil complaints reported in relation to hitting noises in golf driving ranges.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2009년도 춘계 종합학술대회 논문집
• /
• pp.454-460
• /
• 2009

본 연구는 골프연습장 유형별 이용자들의 만족요인을 알아보고 골프연습장 마케팅의 기초자료를 제공하는 것을 목적으로 한다. 본 연구의 대상은 2009년 현재 전라남도에 위치한 G광역시의 6곳의 실내외 골프연습장과 N시, M시, S시에서 6곳의 실내 실외 골프연습장 선정하여 시설을 이용하고 있는 만20세 이상 고객을 모집단으로 선정하였으며, 총 600명의 설문지를 받아 그중 564명의 설문지를 유효 표본으로 하였다. 이상과 같은 연구목적과 연구방법을 통하여 골프경력, 골프실력, 이용횟수, 이용형태에 따른 골프연습장 유형별 고객만족을 비교분석을 하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전력기술부문
• /
• pp.322-324
• /
• 2005

This paper describes the comparison of Two frequency ranges for power line communication. The first one is that the frequency range from 100 to 400 KHz is supported by the Federal Communication Committee(FCC). The other one is that the frequency range from 1MHz to 30MHz is based on the European-supported EN5006A band. In this paper, the advantages and disadvantages of their frequency ranges are discussed for PLC. By ATP/EMTP software, the signal attenuation is simulated both the frequency ranges. It shows that the signal attenuation is bigger at high frequency than at low frequency.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2001년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 2001
• /
• pp.98-106
• /
• 2001

The deformation characteristics of cohesionless soils in Korea were investigated using resonant column tests. Total 60 samples, which were sampled from sedimentary and residual soils and reconstituted using controlled particle-size distributions, were prepared. The confining pressure applied in the tests ranges from 20 kPa to 500 kPa. The test results ware categorized into 3 groups including clean sands, silt and silty sand, and residual soils. Based on test results, the small-strain shear modulus(G$_{max}$) and damping ratio(D$_{min}$) were determined and the effects of confinement on G$_{max}$ and D$_{max}$ were characterized. The empirical correlations predicting G$_{max}$ were suggested for 3 group soils. Nonlinear deformational characteristics of clean sands are significantly affected by confining pressure and the ranges and mean curves for G and D are suggested considering the range of confining Pressure. The silt and silty sand and residual soils were weakly affected by confining pressure, so the representative ranges and curves, independent of confining pressure, were proposed.d.posed.d.

• 대한기계학회논문집A
• /
• 제29권7호
• /
• pp.1028-1034
• /
• 2005

In this paper, the failure analysis of an optical disk drive is carried out and the limit ranges of the misalignment f3r the higher performance are presented. Since optical disks are removable from optical disk drive, the translational and angular misalignments, which causes read/write errors, always exist. Therefore, the limit ranges of the misalignment should be investigated. For this reason, the failure analysis by the vibration analysis is studied. The influences of the misalignment are tested by the aging test. And the limit ranges of the misalignment are proposed for the reliability of optical disk drives.

• 자원환경지질
• /
• 제20권4호
• /
• pp.223-234
• /
• 1987

This paper describes the mode of occurrence and mineralogical properties of electrum from the Namseong Gold-Silver deposits, for the purpose of obtaining data on the characteristics of the ore deposits and the behavior of gold and silver during the mineralization. The gangue minerals are quartz, calcite, fluorite. Ore minerals are mainly composed of pyrite, sphalerite, chalcopyrite and galena with minor amount of argentite, electrum, pyrargyrite, native silver and unidenfied mineral(Cu-Fe-Ag-S series). Three stage of mineralization recognized are, from early to later, (I) pyrite-electrum stage (II) sphalerite-chalcopyrite-galena-argentite-electrum stage (III) sulfosalts stage. The filling temperature of fluid inclusions in quartz ranges from $225^{\circ}$ to $335^{\circ}C$. The value of sulfur fugacity estimated by means of electrum-tarnish method ranges from $10^{-11.5}$ to $10^{-14}$ atm. The compositional heterogeneity within a single grain with respect to gold concentration is common in the Namseong electrums Chemical composition of electrum ranges generally between 25~45 atom% Au. Its gold content decreases in late stages of mineralization.