DOI QR코드

DOI QR Code

Failure Analysis of Optical Disk Drives Using the Vibration Signal Analysis

진동신호분석을 통한 광디스크 드라이브의 고장원인분석

  • 박영필 (한양대학교 정밀기계공학과) ;
  • 신창호 (한양대학교 정밀기계공학과) ;
  • 정진태 (한양대학교 기계정보경영공학부)
  • Published : 2005.07.01

Abstract

In this paper, the failure analysis of an optical disk drive is carried out and the limit ranges of the misalignment f3r the higher performance are presented. Since optical disks are removable from optical disk drive, the translational and angular misalignments, which causes read/write errors, always exist. Therefore, the limit ranges of the misalignment should be investigated. For this reason, the failure analysis by the vibration analysis is studied. The influences of the misalignment are tested by the aging test. And the limit ranges of the misalignment are proposed for the reliability of optical disk drives.

Keywords

References

  1. Chung, J., Oh, J. E. and Yoo, H. H., 2000, Non-Linear Vibration of a Flexible Spining Disc with Angular Acceleration,' Journal of Sound and Vibration, Vol. 231, No. 2, pp. 375-391 https://doi.org/10.1006/jsvi.1999.2718
  2. Heo, J. W., Chung, J. and Choi, K., 2003, 'Dynamic Time Responses of a Flexible Spinning Disk Misaligned with the Axis of Rotation,' Journal of Sound and Vibration, Vol. 262, No. 1, pp. 25-44 https://doi.org/10.1016/S0022-460X(03)00018-X
  3. Cho, E. H., Choa, S. H. and Chung, J., 2001, ' A Study on the Fracture Phenomena in Optical Disks Due to Increase of the Rotating Speed,' Journal of Sound and Vibration, Vol. 11, No.3, pp. 437-442
  4. Seo, J. K., Jeong, H. S. and Park, K. H. 2000, 'Analysis and Reduction of Subsidiary Resonance of an Optical Pickup Actuator,' Transaction of the Korean Society of Mechanical Engineers(A), Vol. 24, No. 3, pp. 728-734
  5. Kim, S. J., Lee, Y. H. and Choi, H. K., 2000, 'Evaluation and Analysis of Dynamic Characteristics in Tilt Actuator for High Density Optical Storage Devices,' Journal of Sound and Vibration, Vol. 10, No. 4, pp. 584-595
  6. Dan, B. J. and Choi, Y. J., 1999, 'Vibration Stabilization of the Tracking System of an Optical Disk Drive,' Journal of the Korean Society of Precision Engineering, Vol. 16, No. 1, pp. 191-199
  7. Choi, D. B., Jo, J. J. and Kim, S. I., 1994, 'Dynamic Characteristics of Spindle with a built-in Motor,' Journal of the Korean Society of Precision Engineering, Vol. 11, No.3, pp. 184-190
  8. Samsung Electronics Co., LTD., 2000, 'Technical Manual of CD-ROM Drive'