• Smart Structures and Systems
• /
• v.8 no.3
• /
• pp.321-341
• /
• 2011

Acoustic emission (AE) monitoring was conducted for mortar specimens under three types of static loading patterns (cubic-splitting, direct-shear and pull-out). Each of the applied loading patterns was expected to produce a particular fracture process. Subsequently, the AEs generated by various fracture or damage processes carried specific information on temporal micro-crack behaviors of concrete for post analysis, which was represented in the form of detected AE signal characteristics. Among various available characteristics of acquired AE signals, frequency content was of great interest. In this study, cement-based piezoelectric sensor (as AE transducer) and home-programmed DEcLIN monitoring system were utilized for AE monitoring on mortar. The cement-based piezoelectric sensor demonstrated enhanced sensitivity and broad frequency domain response range after being embedded into mortar specimens. This broad band characteristic of cement-based piezoelectric sensor in frequency domain response benefited the analysis of frequency content of AE. Various evaluation methods were introduced and employed to clarify the variation characteristics of AE frequency content in each test. It was found that the variation behaviors of AE frequency content exhibited a close relationship with the applied loading processes during the tests.

• Journal of the Korean Society of Safety
• /
• v.2 no.1
• /
• pp.31-41
• /
• 1987

The surface rolling method which is one of the plastic deformation processes increases the surface roughness with reduction of diameter and hardness. In this study, three NACHI 6000 ZZ bearing were used for surface rolling tool on a mild steel. The following results have been obtained with the mild steel. 1) The load is major factor in getting fine surface roughness of roller fininshing after grinding. The optimal surface roughness of SS40 steel can be obtained at the contact pressure of $210kgf/cm^2$. But, Better surface roughness can not be expected, Due to flaking phenomena at more than 300 kgf/cm of contact pressure. 2) At the contact pressure range of $200kgf/cm^2{\sim}210kgf/cm^2$ for optimal surface roughness, The surface hardness increased to Hv 200~Hv 240 from Hv 125 before surface rolling. 3) Within the diameter variation of $13{\mu}m$ the surface roughness and the surface hardness were increased, but out of variation of $14{\mu}m$. The surface roughness become worse and the surface hardness was increased.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.30 no.2
• /
• pp.83-91
• /
• 2018

A datacenter is a high energy consuming facility whose cooling energy consumption rate is 10~20 times larger than general office buildings. The higher the temperature of supply air from a CRAC (computer room air-conditioner) is supplied, the more energy efficient cooling is possible because of improving the COP of a chiller and advanced range of outdoor air temperature available for the economizer cycles. However, because the temperature of cold air flowing into server computers varies depending on air mixing configurations in a computer room, the proper supply air temperature must be considered based on the investigation of air mixing and heat dissipation. By these, this study aims to understand the effects of variation of the supply air temperature on the air flow distributions, temperature distributions and rack cooling efficiencies. Computational fluid dynamics (CFD) aided in conducting the investigation. As a result, the variation of the supply air temperature does not affect the air flow distributions. However, it mainly affects the temperature distribution. From the results of CFD simulations, Rack cooling indices (RCIHI and RCILO) were evaluated and showed the ideal state set at $19^{\circ}C$ of the supply air temperature.

• Journal of Welding and Joining
• /
• v.18 no.4
• /
• pp.70-75
• /
• 2000

The weld seam tracking system for arc welding process uses various kinds of sensors such as arc sensor, vision sensor, laser displacement and so on. Among the variety of sensors available, electro-magnetic sensor is one of the most useful methods especially in sheet metal butt-joint arc welding, primarily because it is hardly affected by the intense arc light and fume generated during the welding process, and also by the surface condition of weldments. In this study, a dual-electromagnetic sensor, which utilizes the induced current variation in the sensing coil due to the eddy current variation of the metal near the sensor, was developed for arc welding of sheet metal butt-joints. The dual-electromagnetic sensor thus detects the offset displacement of weld line from the center of sensor head even though there's no clearance in the joint. A set of design variables of the sensor were determined for the maximum sensing capability through the repeated experiments. Seam tracking is performed by correcting the position of sensor to the amount of offset displacement every sampling period. From the experimental results, the developed sensor showed the excellent capability of weld seam detection when the sensor to workpiece distance is near less than 5 mm, and it was revealed that the system has excellent seam tracking ability for the butt-joint of sheet metal.

• Korean Journal of Veterinary Research
• /
• v.28 no.2
• /
• pp.307-310
• /
• 1988

This experiment was carried out to provide the data of blood chemistry in use of application to clinical diagnosis in racehorses. Blood was collected from 30 racehorses(♀ 17, ♂ 13). Calcium, inorganic phosphorus, blood glucose, blood urea nitrogen, cholesterol, bilirubin, fibrinogen and ketone body in serum were analyzed as follows. 1. The values of calcium and inorganic phosphorus were maintained a certain level without much variation regardless of sex and species, Ca/P ratio was in the range of 3.13~3.35. 2. The value of blood glucose was 60 mg/100ml, Age and sex of racehorses make no difference in the value. 3. The value of blood urea nitrogen and total cholesterol showed a tendency to increase according to the age. Total cholesterol value was somewhat higher in male than in female. 4. The value of total bilirubin showed a tendency to increase according to the age. There was no difference between sexes in the value. 5. The value of fibrinogen showed no apparent difference with age and sex. 6. Ketone body was negative in all of the cases. 7. There was no variation in the species of the racehorses.

• Ocean and Polar Research
• /
• v.34 no.4
• /
• pp.395-401
• /
• 2012

Ten-year AVHRR sea surface temperature data obtained in the Yellow Sea are put into EOF analyses. Temperature variation is predominated by the first mode which is associated with the seasonal fluctuation of temperature with annual range decreasing with the bottom depth. Since such a strong annual signal may mask the upwind or downwind flows occurring intermittently during the winter, only the data obtained during this season are put into EOF analyses. Every winter shows similar results. The first mode, explaining more than 90% of total variance, appears to be a part of the seasonal variation of temperature mentioned above. In the second mode, the time coefficient is well correlated with northerly winds to which the responses of the trough and shallow coastal areas are opposite to each other. A simple theoretical consideration suggests the following physical explanation: The northerly wind stress anomaly creates an upwind (downwind) flow over the trough (coastal) areas, which then induces a temperature increase (decrease) by advection of heat, and vice versa for the southerly wind stress anomaly. Hence, this paper provides further evidence of the intermittent upwind or downwind flows occurring in the Yellow Sea every winter.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.1 no.4
• /
• pp.464-471
• /
• 2012

Self-excited induction generators (SEIG) are gaining importance as compared to conventional generators due to their capability toconvert wind energy into electrical energy for a wide range of variation in operating speed. The performance of such a generator depends upon the load, rotor speed and excitation capacitance. Therefore, depending upon the operating conditions, the output voltage and frequency of this machine goes on changing and this imposes a restriction on its usage. In order to maintain constant voltage and frequency, it need controllers, which make the circuit complicated and also increases the overall cost of power generation. This paper presents a simple controller to regulate the output voltage and frequency of SEIG for variation in its operating conditions due to any change in load, rotor speed and excitation capacitance (R, N, C) and their combination. The controller presented is simple in design, user friendly and is also less expensive, as the elements used in the controller are only resistors, inductors and capacitors. A block of SEIG for steady state operation is also modeled and presented in this paper. SEIG, Controller and other components are modeled and simulated using Matlab/Simulink.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.40 no.2
• /
• pp.112-122
• /
• 1998

Measurement of electrical resistivity in soils has been used for many years with purpose of estimating in situ porosity or density. Recently electrical resistivity has also been used as an indicator of soil contaimination. This paper presents the result of laboratory experiment to investigate the resistivity variation in contaminated sandy soils. The results can be used with the Cone Penetrometer Test (CPT) result to analyse ground condition. In the experiment, the water content and leachate concentration of soils were controlled by groundwater and leachate, and then the resistivity measurement was made with 'STING-R1' by Advanced Geosciences Inc. In the case of using groundwater, the resistivity was in the range of over 1000${\omega}{\cdot}m$, but in the case of using polluted water by leachate, the resistivity decreased significantly down to 10~ 100${\omega}{\cdot}m$ for the same moisture content. Also the resistivity varied according to the degree of saturatrion. Therefore, if soil is contaminated by leachate, the CPT with electrical resistivity sensor might be used to investigate the contamination status and plume migration. But exact component of leachate and the pollutant concentration are still hard to identify.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.7 s.166
• /
• pp.1139-1146
• /
• 1999

Reliability analysis of structures based on fracture mechanics requires knowledge on statistical characteristics of the parameter C and m in the fatigue crack growth law, $da/dN=C({\Delta}K)^m$. The purpose of the present study is to investigate if it is possible to predict fatigue crack growth rate by only the fluctuation of the parameter C. In this study, Paris-Erdogan law is adopted, where the author treat the parameter C as random and m as constant. The fluctuation of crack growth rate is assumed only due to the parameter C. The growth resistance coefficient of material to fatigue crack growth (Z=1/C) was treated as a spatial stochastic process, which varies randomly on the crack path. The theoretical crack growth rates at various stress intensity factor range are discussed. Constant ${\Delta}K$ fatigue crack growth tests were performed on the structural steel, SM45C. The experimental data were analyzed to determine the autocorrelation function and Weibull distributions of the fatigue crack growth resistance. And also, the effect of the parameter m of Paris' law due to variation of fatigue crack growth resistance was discussed.

• Korean Journal of Pharmacognosy
• /
• v.33 no.3 s.130
• /
• pp.194-199
• /
• 2002

The radix and folium of Eucommia ulmoides(Eucommiaceae) has been used for backache, atrophy of the leg and knee, enuresis, hypertension. In order to evaluate to quality of folium, we have been isolated a main compound as a standard compound, which was elucidated $quercetin-3-O-{\beta}-D-xylopyranosyl(l{\rightarrow}2)-{\beta}-D-glucopyranoside$ through it's physicochemical data and IR, FAB-Mass, $^{13}C-NMR$ and $^{1}H-NMR$ analysis. It was analyzed by HPLC system using 17% $CH_3CN$ as a solvent system. The amount of $quercetin-3-O-{\beta}-D-xylopyranosyl(l{\rightarrow}2)-{\beta}-D-glucopyranoside$ from Eucommiae folium was in the range of $0.056{\pm}0.022$ mg(n=7) and also from the results of analysis through seasonal variation$(June{\sim}October)$ September and October have been evaluated to be very high in it's content.