• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.11
• /
• pp.1061-1066
• /
• 2006

This paper presents the electrical characteristics with manufacturing process and performance evaluation of high performance zinc oxide varistors. ZnO varistors were fabricated with typical ceramic production methods with different thickness and the structural and electrical characteristics of ZnO varistors were investigated. All varistors exhibited high density, which was in the range of $5.41{\sim}5.49g/cm^3$. In the electrical properties, the reference voltage increased in the range of $4.410{\sim}5.250kV$ with increasing their thickness and the residual voltage exhibited the same trends as the reference voltage. In the long duration current impulse withstand test, E-2 and F-1 samples failed at the two and four shots of impulse current, respectively, but E-1 and F-2 samples survived 18 shots during the test. Before and after this test, the variation ratio of residual voltage of E-1 and F-2 samples were -0.34 % and 0.05 %, respectively, which were in the acceptance range of 5 %. According to the results of tests, it is thought that if the fabrication process such as insulating coating, sintering condition, and soldering method is improved, these ZnO varistors would be possible to apply to the station class arresters in the near future.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.15 no.1
• /
• pp.1-8
• /
• 2009

Purpose: The purposes of this study were to establish the concurrent validity of the universal goniometer and electronic inclinometer for ankle joint of motion, and to determine the inter-tester and the intra-tester reliability of these two instruments. Methods: Subjects were instructed 25 healthy subjects. Ankle range of motion was measured on two separate occasions 2 or 3 days by two physical therapists. Ankle dorsiflexion and plantarflexion was by using an universal goniometer and an electronic inclinometer. Results: The Pearson product-moment correlation between the two instruments was 0.78~0.80. The ICCs for inter-tester reliability ranged from 0.63 to 0.73 for universal goniometer and ranged from 0.81 to 0.88 for electric inclinometer. The ICCs for intra-tester reliability showed a wide variation(ICC=0.61 to 0.86). Conclusion: These findings indicate that the two instruments are reliable instruments for measuring ankle joint range of motion. The results also indicate that the two instruments can be used interchangeably for measuring ankle motions.

• ETRI Journal
• /
• v.27 no.5
• /
• pp.551-556
• /
• 2005

We have demonstrated a high-power widely tunable sampled grating distributed Bragg reflector (SGDBR) laser integrated monolithically with a semiconductor optical amplifier (SOA) having a lateral tapered waveguide, which is the first to emit a fiber-coupled output power of more than 10 dBm using a planar buried heterostructure (PBH). The output facet reflectivity of the integrated SOA using a lateral tapered waveguide and two-layer AR coating of $TiO_2\;and\;SiO_2$ was lower than $3\;{\times}\;10^{-4}\;over$ a wide bandwidth of 85 nm. The spectra of 40 channels spaced by 50 GHz within the tuning range of 33 nm were obtained by a precise control of SG and phase control currents. A side-mode suppression ratio of more than 35 dB was obtained in the whole tuning range. Fiber-coupled output power of more than 11 dBm and an output power variation of less than 1 dB were obtained for the whole tuning range.

• Phonetics and Speech Sciences
• /
• v.5 no.1
• /
• pp.91-98
• /
• 2013

This paper investigated Korean prosody as it relates to graded internal structure in an identification function. Within Korean prosody, variants regarded as dialectal variations can appear as different prosodic scales, which contain the range of within-category variations. The current experiment was intended to show how the prosodic scale corresponding to the range of within-category differences relates to f0 contours for speakers of two Korean dialects, North Kyungsang and South Cholla. In an identification task, participants responded by selecting an item from two answer choices. The probability of choosing the correct response from the two choices was computed by a logistic regression analysis using intercepts and slopes. That is, the correct response between two choices was used to show a linear line with an s-shape presentation. In this paper, to investigate the graded internal structure of labeling, 25%, 50%, and 75% of predicted probability were assessed. Listeners from North Kyungsang showed progressive variations, whereas listeners from South Cholla revealed random patterns in the internal structure of the identification function. In this paper, the results were plotted using scatterplot graphs, applying the range of within-category variation and predicted probability obtained from the logistic regression analyses. The scatterplot graphs showed the different degree of the responses for f0 scales (i.e., variations within categories). The results demonstrate that the gradient structures of native pitch accent users become more progressive in response to f0 scales.

• Journal of Welding and Joining
• /
• v.21 no.1
• /
• pp.48-53
• /
• 2003

The object of this study is to examine the effect of short circuit time ratio (SCTR) and current rise delay time (Td) on the spatter generation at low and medium current range in $CO_2$ welding. The spatter was evaluated by the weight generated in the welding of bead-on-plate for 30 seconds (3 times). Td was varied by order of 0, 0.4, 0.8 and 1.2 msec. At each Td, the short circuit time ratio was varied by the output voltage of the welding power source. In the low current range, it was found that the optimum SCTR was 20~25%, and the minimum spatter generation weight was obtained in the case of Td=0.4msec and SCTR=22% even though the remarkable difference was not showed by the application of Td. In the medium current range, it was confirmed that the arc was stable though the SCTR was increased from 20% to 40% by the control of current wave. Spatter generation weight depended on the variation of Td, and the lowest value of spatter generation weight occurred at Td=0.8~1.2msec.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.5
• /
• pp.560-566
• /
• 2004

In this paper, the electrical and emission properties of electrodeless fluorescent lamp were discussed using the inductively coupled plasma (ICP) with the variation of argon gas pressure and RF power. The RF output was applied to the antenna in the range of 5∼50 W at 13.56 MHz. The internal plasma voltage of the chamber and the probe current were measured while varying the supply voltage to the Langmuir probe in the range of －100V∼＋100V. When the pressure of argon gas was increased, electric current was decreased. There was a significant electric current increase from 10 to 30 W. Also, when the RF power was increased, electron density was increased. Also, the emission spectrum, Ar- I lins, luminance were investigated. At this time, the input parameter for ICP RF plasma, Ar gas pressure and RF power were applied in the range of 10∼60 mTorr, 10∼300 W, respectively. This implies that this method can be used to find an optimal RF power for efficient light illumination in an electrodeless fluorescent lamp.

• Animal Systematics, Evolution and Diversity
• /
• v.33 no.2
• /
• pp.136-139
• /
• 2017

The genus Iksookimia (Actinopterygii: Cypriniformes: Cobitidae) is a bottom-dwelling freshwater loaches, which are well-known as their endemism and high geographic variation. However, population genetic relationships among Iksookimia spp. have remained unclear due to a shortage of genetic markers that can be applied generally in the genus. Here, we developed high-resolving microsatellite markers using I. koreensis and I. longicorpa as representatives of Iksookimia species because of their wide distribution range and phylogenetic position. Ten of polymorphic microsatellite loci were isolated from Iksookimia koreensis and were successfully cross-amplified in I. longicorpa. The mean number of observed alleles per locus was about 10.4 (range, 2-17) for I. koreensis and about 13.2 (range, 2-24) for I. longicorpa. The loci, IK03 and IK08, deviated from the Hardy-Weinberg equilibrium in I. koreensis, after applying the Bonferroni correction. The microsatellite markers obtained in the present study will be useful to evaluate population genetic structure and to establish conservation strategies for I. koreensis and related Iksookimia species.

• Journal of ILASS-Korea
• /
• v.18 no.3
• /
• pp.132-139
• /
• 2013

Smoke emissions from light duty diesel vehicles were measured using light extinction method with the free acceleration test mode. The smoke emissions for each measurement cycle of the free acceleration method showed large variations according to driver's pedal pushing pattern. The smoke values for each measurement cycle initially increased and reach a peak value. Integration of the smoke emissions with time for each measurement cycle was performed to get a representative smoke value which was obtained by averaging the integrated results. Two kinds of integration time range were used. One is range over the whole measurement cycle of the free acceleration method. The other is only the acceleration range in the measurement cycle. Overall, variation of the representative smoke values obtained by the integration method was reduced comparing to the traditional representative smoke value which was obtained from a peak smoke value over the measurement cycle. Ten vehicles of the same model with 2.5 liter diesel engines, and seven vehicles of the same model with 2.7 liter diesel engines, were tested using the free acceleration test method.

• Current Research on Agriculture and Life Sciences
• /
• v.31 no.4
• /
• pp.233-239
• /
• 2013

Understanding the temporal variability of agricultural parameters derived from historical climate data is important for planning in agriculture. Therefore, this study assessed the magnitude and recent trends of the transpiration ratio defined as the crop water use per harvested yield for the period from 1980 to 2010. The crop water use was estimated using the Food and Agriculture Organization's Crop Wat model for eight administrative provinces in Korea. The temporal trends and spatial uncertainty were explored using the Mann-Kendall and Theil Sen's methods. The regional average rice yield was $6.31t\;ha^{-1}$(range 5.9 to $6.9t\;ha^{-1}$). The results showed that the rice yield in Korea increased by $26kg\;ha^{-1}yr^{-1}$. Overall, the regional average transpiration ratio was $1,298m^3t^{-1}$ (range 1,162 to $1,470m^3t^{-1}$). From 1980 to 2010, the transpiration ratio decreased by $8.2m^3t^{-1}$ (range 2.7 to $14.4m^3t^{-1}$), largely as a result of the increasing yield. The statistical approach to historical data used in this study also provides a basis for simulating the future transpiration ratio.

• Journal of IKEEE
• /
• v.27 no.3
• /
• pp.234-238
• /
• 2023

In this paper, we propose a time-to-digital converter (TDC) with compensation capability for PVT (process, voltage, and temperature) variations. A typical delay line-based TDC measures time based on the inverter's propagation delay, making it fundamentally sensitive to PVT variations. This paper presents a method to minimize the resolution change of TDC by compensating for the propagation delay caused by the PVT variations. Additionally, it dopts Cyclic Vernier TDC (CVTDC) structure to provide a wide input detection range. The proposed CVTDC with PVT compensation function is designed using a 45nm CMOS process, consumes 8mW of power, offers a TDC resolution of 5 ps, and has an input detection range of about 5.1 ns.