• Progress in Medical Physics
• /
• v.18 no.1
• /
• pp.48-54
• /
• 2007

This study is to develope a phantom for MOSFET (Metal Oxide Semiconductors Field Effect Transistors) dosimetry and compare the dosimetric properties of standard MOSFET and microMOSFET with the phantom. In this study, the developed phantom have two shape: one is the shape of semi-sphere with 10cm diameters and the other one is the flat slab of $30{\times}30cm$with 1 cm thickness. The slab phantom was used for calibration and characterization measurements of reproducibility, linearity and dose rate dependency. The semi-sphere phantom was used for angular and directional dependence on the types of MOSFETs. The measurements were conducted under $10{\times}10cm^2$ fields at 100cm SSD with 6MV photon of Clinac (21EX, Varian, USA). For calibration and reproducibility, five standard MOSFETS and microMOSFETs were repeatedly Irradiated by 200cGy five times. The average calibration factor was a range of $1.09{\pm}0.01{\sim}1.12{\pm}0.02mV/cGy$ for standard MOSFETS and $2.81{\pm}0.03{\sim}2.85{\pm}0.04 mV/cGy$ for microMOSFETs. The response of reproducibility in the two types of MOSFETS was found to be maximum 2% variation. Dose linearity was evaluated In the range of 5 to 600 cGy and showed good linear response with $R^2$ value of 0.997 and 0.999. The dose rate dependence of standard MOSFET and microMOSFET was within 1% for 200 cGy from 100 to 500MU/min. For linearity, reproducibility and calibration factor, two types of MOSFETS showed similar results. On the other hand, the standard MOSFET and microMOSFET were found to be remarkable difference in angular and directional dependence. The measured angular dependence of standard MOSFET and microMOSFET was also found to be the variation of 13%, 10% and standard deviation of ${\pm}4.4%,\;{\pm}2.1%$. The directional dependence was found to be the variation of 5%, 2% and standard deviation of ${\pm}2.1%,\;{\pm}1.5%$. Therefore, dose verification of radiation therapy used multidirectional X-ray beam treatments allows for better the use of microMOSFET which has a reduced angular and directional dependence than that of standard MOSFET.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.30 no.4
• /
• pp.398-404
• /
• 1985

This study was conducted to define the seasonal differences in the morphological characteristics, the photosynthetic abilities and the dark respirations of the 4-year old ginseng leaves. Chlorophyll-a content in the ginseng leaf was significantly decreased at September than at June but content of chlorophyll-b was not showed seasonal difference. At June, the amounts of chlorophyll a and b in the ginseng leaves grown in the back row were rather abundant than those grown in the front row, but no significant differencies were detected between rows at September. The estimated optimum light intensity for the photosynthesis of ginseng leaves was higher at June than at September and higher in the front row than the back row but was significantly decreased by air temperature above 25$^{\circ}C$. The light compensation point was elevated in higher temperature and at September than June. The amount of photosynthesis was significantly increased in the ginseng plant grown in the front row than the back row at June but the reverse was significant at September. The highest photosynthesis was observed in temperature range of 20 - 25$^{\circ}C$ at June and range of 15 -20$^{\circ}C$ at September. The optimum temperature range of photosynthesis was 21$^{\circ}C$ to 25$^{\circ}C$ at June and 14$^{\circ}C$ to 21$^{\circ}C$ at September, and that was higher in the back row than the front row. High temperature significantly stimulated the dark respiration of ginseng leaves and the respiratory quotients(Q$\_$10/) of the ginseng leaves showed a significant seasonal variation.

• The Korean Journal of Quaternary Research
• /
• v.4 no.1
• /
• pp.41-57
• /
• 1990

Gravel shapes of the terrace gravel sequences are compared with the present river gravels and beach gravels in the Pohang and its surrounding areas. Seventeen gravel textural parameters are divided into 5 groups based on R-mode factor analysis. Among them, three parameters (RDm, MPSm, SZstd) are selected for a test of discriminant possibility of palaeoenvironment of the terrace gravel deposits. Marine gravels are in the range of 0.49 to 0.75 in mean roundness, 0.46 to 0.78 in mean maximum projection sphericity and 0.39 to 1.85 in standard deviation of size, whereas river gravels are 0.28 to 0.51 in mean roundness, 0.66 to 0.72 in mean maximum projection sphericity and 1.04 to 1.81 in standard deviation of size. For practical access to the palaeoenvironment discrimination, a bivariant diagram between mean roundness and mean maximum projection sphericity is the most effective. The marine terrace gravels are plotted within the variation range of present beach gravels and show 0.49 to 0.71 in mean roundness and 0.59 to 0.66 in mean maximum projection sphericity. The gravels of river terrace vary within the range of gravels derived from present river bed and are characterized as 0.36 to 0.48 in mean roundness and 0.66 to 0.71 in mean maximum projection sphericity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.709-717
• /
• 2016

In this study, the convenience and efficiency of vision-based displacement measurement (VBDM) to estimate the cable tension of cable-stayed bridges and the requirements for its effective application were examined. To demonstrate its convenience and efficiency, it was confirmed that VBDM can be accomplished with a minimum amount of equipment using a commercial camcorder. In this case, it was found that the accuracy of estimation of the natural frequencies is sufficient, even though magnitude errors can occur when conducting high-speed recording at the low resolution afforded by the minimal equipment employed. It was also confirmed that the most important factor in detecting the precise natural frequencies is the use of the appropriate frequency range in the tension estimation using vibration. Based on these results, a study was carried out on the accuracy variation of the estimated tension according to the frame rate of a commercial camcorder. For this purpose, an experiment was performed to estimate the cable tension in a cable-stayed bridge model. Through this experiment, the detectable tensions of cables with various natural frequencies as a function of the frame rate were summarized. As a result, it was shown that the frame rate should be determined based on the natural frequency which is estimated to be located within the appropriate frequency range (approximately 10~75% of theoretical range) considering the aliasing and low-frequency distortion due to excitations.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.1
• /
• pp.99-107
• /
• 2016

In order to maintain the precise positioning accuracy of the VLBI system, the shape deformation found in antenna structure should be monitored. In fact, reduced the antenna gaining of an electromagnetic wave reception from the Quasar has been particularly expected due to the shape deformation of main reflector in VLBI antenna. Therefore, the importance of shape deformation monitoring for the main reflector has been significantly increased. The main reflector has come out as the high potential for deformation in the VLBI structure. The fact has led us to investigate the monitoring system for the main reflector based on the efficient algorithm in accordance with the close-range photogrammetry, which of expecting to be utilized as the continuous and automated monitoring system for the structure deformation in the near future. Ten fitting lines were estimated with the TLS for feature points of distributed in all directions from the main reflector. The resultant intersection point of estimated fitting lines was calculated by using the nearest point calculation algorithm, based on those non-intersection lines. Following to the intuitive basis for the time series analysis, the results was able to provide the calculation of numerical variation in the intersection point, which is represented in 3-axis,; that we are expecting to open the way for predicting a deformation rate as well as deformation direction

• Journal of the Korea Concrete Institute
• /
• v.18 no.5 s.95
• /
• pp.611-620
• /
• 2006

In the shear failure mechanism of a beam, beam and arch actions always exist simultaneously. According to the shear span to depth ratio, the proportion between these two actions is varied and the contribution of these actions to shear capacity is changed. Moreover, the current codes provide recommendations based on experimental results of normal strength concrete, so the application range of concrete strength must be extended. Based on this mechanism and new requirement, a simplified analytical equation for shear capacity prediction of reinforced high strength concrete beams without stirrups is proposed. To reflect the change in the contribution between these actions, stress variation in the longitudinal reinforcement along the span is considered by use of the Jenq and Shah Model. Dowel action with horizontal splitting failure and shear friction between cracks are also taken into account. ize effect is included to derive a more precise equation. Regression analysis is performed to determine each variable and simplify the equation. And, the formula derived from theoretical approaches is evaluated by comparison with numerous experimental data, which are in broad range of concrete strength(especially in high strength concrete), shear span to depth ratio, geometrical size and longitudinal steel ratio. It is shown that the proposed equation is more accurate and simpler than other empirical equations, so a wide range of a/d can be considered in one equation.

• Journal of Sensor Science and Technology
• /
• v.7 no.3
• /
• pp.171-178
• /
• 1998

Silicon piezoresistive absolute pressure sensor for gas leakage alarm system was developed. This sensor must operate normally in the range of $0{\sim}600\;mmH_{2}O$ pressure, and $0{\sim}100^{\circ}C$ temperature. To make the most of this sensor for gas leakage alarm system, gas must not leak from the sensor itself when the diaphragm of the sensor fractures. Thus, the sealed diaphragm cavity was anodically bonded to pyrex 7740 glass under the condition of $10^{-4}$ torr, at $400^{\circ}C$. The sensitivity of developed sensor was $4.06{\mu}V/VmmH_{2}O$ for $600\;mmH_{2}O$ full-scale pressure range. And temperature compensation method of this sensor is to change bridge-in put-voltage linearly in proportion to the temperature variation by using diode(PXIN4001) or Al thin film resistor. By these methods the temperature effect in the range of $0{\sim}100^{\circ}C$ was compensated over 80 % for offset drift, 95 % for sensitivity.

• Journal of the Korean Society of Radiology
• /
• v.6 no.2
• /
• pp.137-142
• /
• 2012

This study is investigated dose change on intra-oral radiography when same conditions under the others unit and same unit under the different exposed conditions. Three different radiation devices were studied. Exposure to the upper anterior, premolar and molar on the variant time and dose measure was using semiconductor radiation dose meter. Obtained film density value was analyzed to the belong in the range of diagnosis. Results for dose of each region were less dissimilar between the maximum and minimum. Its value was different 10 times as many as 3 times. In addition, the range of film density was 2.10 ~ 2.95. These values were exceeded on the allow density of diagnostic value '0.25 ~ 2.0'. Even if the same device and the same condition, measured dose was considerable differance and film density was showed show the inappropriate density range. Those can be caused the patient's re-take and patient's diagnostic errors so patients has affected direct and indirect radiological harm. Therefore, dental radiography devices will be required periodical maintenance and also provided standard on the exposure and processing conditions.

• Korean Journal of Soil Science and Fertilizer
• /
• v.14 no.1
• /
• pp.37-43
• /
• 1981

This pot experiment was conducted to find out the optimal fertilization ratio of the cations(K: Ca: Mg) in various soil conditions. Soil samples were collected from uncultivated mountains and hills where development for grass lands is under consideration. The optimum ratios were computed by the Homes systematic variation technique. The results were summarized as follows : 1. The optimum fertilization ratios of the cations (K : Ca : Mg) for the high yields of grass-clover mixed sward at various areas were obtained (Table 4) 2. The relatively high optimum fertilization ratios of K in Daegu and Taegwalryong, Ca in Unbong, and Mg in Cheju district gave the high yields of clover in mixed sward. They were positively related to the low contents of the above cations in the soils or the relatively low content ratio comparing with other cations. 3. The yields of clover in mixed sward were seriously affected by the changes in both the fertilization ratio and total concentration of cations comparing to those of the grass yields. As a consequence, total yields, quality, and botanical composition of the mixed sward were also affected. 4. The antagonis among the cations K, Ca, and Mg was known from the point of mineral contents of grass and clover. 5. The equivalent ratio K/(Ca+Mg) or grass was greatly increased by the range of 2.4 and 3.3 in the K-group treatment, which was higher than the critical level 2.2 of grass tetany, otherwise that. of clover by the range of 0.9 and 1.2. Therfore, it may be concluded that if the botanical composition of grass/legume sward is optimum, the incidence of grass tetany can be eliminated.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.82.2-82.2
• /
• 2013

The NISS (Near-infrared Imaging Spectrometer for Star formation history) onboard NEXTSat-1 is being developed by KASI. The NISS will perform the imaging low-resolution spectroscopic observation in the near-infrared range for nearby galaxies, low background regions, starforming regions and so on. The off-axis reflecting telescope with a wide field of view (2 deg. ${\times}$ 2 deg.) will be operated in the wavelength range from 0.95 to $3.8{\mu}m$. In order to reduce thermal noise, a telescope and a HgCdTe infrared sensor will be cooled down to 200K and 80K, respectively. To evade a stray light outside a field of view and use limited space efficiently, the NISS adopted the off-axis reflective optical system. The primary and secondary mirrors, optomechanical part and mechanical structure were designed to use the same material. It will lessen the degradation of optical performance due to a thermal variation. The purpose of NISS is the observation of cosmic near-infrared background in the wide wavelength range as well as the detection of near-infrared spectral lines in nearby galaxies, cluster of galaxies and star forming regions. It will give us less biased information on the star formation history. In addition, we will demonstrate the space technologies related to the development of the Korea's leading near-infrared instrument for the future large infrared telescope, SPICA.