• 한국광학회지
• /
• 제14권3호
• /
• pp.321-326
• /
• 2003

WDM광통신의 핵심 소자 중 하나인 파장 가변 레이저를 넓은 파장 영역에서 회절 격자에 대한 입사각의 변화에 따라 연속 가변되는 Littman형과 Littrow 형의 외부 공진기로 구현하였다 회절 격자에 대한 입사각과 회절각이 동일하며 구조가 간단한 Littrow형의 파장 가변 레이저에서, 입사각 49$^{\circ}$를 중심으로 격자를 $\pm$1$^{\circ}$정도 회전시켜 C-밴드 및 L-밴드 영역을 대부분 포함하는 약 80 nm 정도의 가변 범위(1510 nm-1590 nm)를 얻었으며, 특히, 60 nm 범위에서는 주입 전류의 조절 없이 1.5㏈ 미만의 출력 변화를 보임으로써, 광대역 파장 가변 광원으로 적합한 구조임을 확인하였다.

• 대한치과의사협회지
• /
• 제20권6호통권157호
• /
• pp.513-524
• /
• 1982

The purpose of this study was to test the statistical significance of Ideal Acceptable Compromise and determine the range of their use according to the Steiner's analysis. 56 adults male and 62 adults female ranging in age from 18 to 20 years with normal occlusion were studied and analyzed statistically. The results were as follows; 1. The authors obtained the ANB range values and ideal acceptable compromise. 2. Simple correlation coefficients of each variables used in the ideal acceptable compromise were obtained. 3. It is most valid that use the ANB angle as a dependent variable among the five variables. 4. In the multiple regression equations, the rank of significant variables were 1 to NA(angle), I to NA(mm), 1 to NB (mm) in male group, and 1 to NA (angle), 1 to NB (angle), 1 to NA (mm), 1 to NB (mm) in female group when ANB angle was used as a dependent variables.

• 대한족부족관절학회지
• /
• 제21권2호
• /
• pp.55-60
• /
• 2017

Purpose: Stiffness in the first metatarsophalangeal joint after surgery for hallux valgus has been reported. The goal of this study was to test the efficacy of releasing plantar aponeurosis for improving the range of extension in the first metatarsophalangeal joint that was limited after hallux valgus surgery. Materials and Methods: Thirteen patients (1 man, 12 women [17 feet]; median age, 54.4 years; range, 44~69 years) with limited first metatarsophalangeal joint extension after hallux valgus surgery, who underwent an additional procedure of plantar aponeurosis release between March 2015 and August 2015, were included. Subsequently, the passive range of extension in the first metatarsophalangeal joint was evaluated via knee extension and flexion positions. Hallux valgus angle, inter-metatarsal angle, distal metatarsal articular angle, and talo-first metatarsal angle were measured on weightbearing dorsoplantar and lateral radiographs of the foot preoperatively. Results: The mean range of extension for the first metatarsophalangeal joint improved significantly, from $2.5^{\circ}$ to $40.9^{\circ}$ in the knee extension position (p<0.00). The mean extension range for the first metatarsophalangeal joint also improved, from $18.2^{\circ}$ to $43.2^{\circ}$ in the knee flexion position (p<0.00). In all patients, congruence of the first metatarsophalangeal joint was recovered. Conclusion: Plantar aponeurosis release is an effective additional procedure for improving the extension range of the first metatarsophalangeal joint after hallux valgus surgery.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 추계학술대회
• /
• pp.699-701
• /
• 2017

장거리 관측용 카메라의 일반적인 운용방법은 광각에서 표적에 대한 탐지를 하며, 망원으로 표적에 대한 인지/식별을 하게 된다. 탐지/인지거리 성능은 방산용 적외선카메라의 성능을 평가하는 중요한 항목이다. 탐지거리 성능이 증가하려면 카메라의 시야가 좁아져야 하고, 좁은 시야각으로 인하여 표적을 찾게 될 확률이 상대적으로 낮아지게 된다. 본 연구에서는 탐지거리 성능을 유지하면서 넓은 시야각을 제공하여 표적에 대한 탐색을 용이하게 할 수 있는 방안을 검토하였다. 그리고 M&S 및 최적화 설계를 통하여 시야 확장형 적외선카메라를 제작하고 시험한 결과를 정리하였다.

• 전기학회논문지
• /
• 제66권2호
• /
• pp.339-346
• /
• 2017

This paper proposes a sensorless control method to improve the performance of an internal permanent magnet synchronous motor (IPMSM) control by using a full-order flux observer in a wide speed range. The conventional sensorless control method uses a constant gain for high performance at low-speed region. However, this method has drawbacks such as an increased angle error and current ripple in the high-speed region due to the fixed gain value. In order to overcome this problem, the gain of the full-order flux observer is changed by considering the angle error in the whole speed range. The proposed method minimizes the angle error for each region of the speed range by applying a relevant gain value, which improves the current ripple reduction and motor noise cancellation. The validity of proposed sensorless control method is verified by a simulation and an experiment.

• 한국의료질향상학회지
• /
• 제16권1호
• /
• pp.79-89
• /
• 2010

Background : This study was identified the effects of a video CD Rehabilitation program on the range of knee angle and activities of daily living in patients with a total knee replacement Method : The data was collected from March 1 to May 31 2009 for the control group and from July 1 to September 31 2009 for the experimental group. The control and experimental groups contained 19 subjects each. A video CD Rehabilitation program configured to 8 minutes in length was shown 8 times every other day. Result : 1. On the day of Hemovac removal, the knee angle and CPM angle in the experimental group increased significantly, but they remained relatively constant on post operation day 21. 2. The activities of daily living were significantly different in the experimental group. Conclusion : 1. On the day of Hemovac removal, the knee angle and CPM angle in the experimental group increased significantly, but they remained relatively constant on post operation day 21. 2. The activities of daily living were significantly different in the experimental group.

• 제어로봇시스템학회논문지
• /
• 제4권1호
• /
• pp.82-87
• /
• 1998

In this study, the theoretical resolution analysis of an active vision system using laser range finder is performed for surrounding recognition and 3D data acquisition in unknown environment. In the result, the resolution of range data in laser range finder is depend on the distance between lens center of CCD camera and light emitter, view angle, beam angle, and parameters of CCD camera. The theoretical resolutions of the laser range finders of various types which are based on parameters effected resolution are calculated and experimental results are obtained in real system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.510-514
• /
• 1994

This paper deals with an application of neural network to camera calibration with wide angle lens and 2-D range finding. Wide angle lens has an advantage of having wide view angles for mobile environment recognition ans robot eye in hand system. But, it has severe radial distortion. Multilayer neural network is used for the calibration of the camera considering lens distortion, and is trained it by error back-propagation method. MLP can map between camera image plane and plane the made by structured light. In experiments, Calibration of camers was executed with calibration chart which was printed by using laser printer with 300 d.p.i. resolution. High distortion lens, COSMICAR 4.2mm, was used to see whether the neural network could effectively calibrate camera distortion. 2-D range of several objects well be measured with laser range finding system composed of camera, frame grabber and laser structured light. The performance of 3-D range finding system was evaluated through experiments and analysis of the results.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.668-673
• /
• 2000

Spud angle( ${\alpha}$ ) and fuel injection angle ( ${\beta}$ ) have strong influence on spud type gas burner combustion. A wide range of flame stability is shown at ${\alpha}=60^{\circ}$, but at ${\alpha}=30^{\circ}$ is narrow. Optimum condition of flame stability swirl angle( ${\gamma}$ ) is $40^{\circ}$. At condition of ${\alpha}=30^{\circ}$ flame shape is relatively narrow and long, on the other hand, at ${\alpha}=60^{\circ}$ flame is wide and short. Regardless of spud angle, maximum flame temperature shows in the range of Z=200mm and R=0mm. Flame temperature, on the whole, is high at ${\alpha}=45^{\circ}$. At ${\alpha}=45^{\circ}$, NOx emission is higher than other conditions that may be concerned with flame temperature. At ${\beta}=60^{\circ}$ and ${\gamma}=40^{\circ}$, NOx emission is reduced due to fuel injection angle.

• 한국정보통신학회논문지
• /
• 제17권3호
• /
• pp.597-602
• /
• 2013

본 논문에서는 렌즈화각 150도 이상의 메가 픽셀급 렌즈가 획득한 영상이 통형 왜곡을 보정하는 광각렌즈 모듈의 설계를 제안한다. 이로서 초광각 렌즈에서 획득된 영상은 WDR(Wide dynimic range) 2메가급 CMOS 이미지 센서데이터를 통해 초광각 영상의 왜곡영상을 보정하는 2 메가급 카메라 모듈의 왜곡영상의 화질을 개선한다.