• 한국컴퓨터정보학회논문지
• /
• 제23권2호
• /
• pp.1-7
• /
• 2018

The adaptive optics for compensating for optical wavefront distortion due to atmospheric turbulence has recently been used in systems that improve beam quality by eliminating the aberrations of high power laser beam wavefront. However, unseen-mode, which can not be measured in the wavefront sensor, increases the instability of the laser beam wavefront compensator on the adaptive optics system. As a method for improving such instability, a mathematical method for limiting the number of singular values is used when generating the command matrix involved in generation of the drive command of the wavefront compensator. In the past, however, we have relied solely on experimental methods to determine the limiting range of the singular values. In this paper, we propose a criterion for determining the limiting range of the singular values using the driving characteristics and the correlation technique of the wavefront compensator's actuators and have proved its performance experimentally.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권3호
• /
• pp.211-218
• /
• 2000

The performance and dynamic characteristics of three-phase active power filter with PCC voltage compensation is presented and analyzed in this paper. The characteristics of parallel active filter are discussed when they are applied to nonlinear loads with current source and voltage source type, the characteristics of voltage compensator and comparison of two functions are discussed. The proposed scheme in this paper employs a PWM voltage-source inverter and has two operation modes. First, it operates as a conventional active filter with reactive power compensation while PCC voltage is in a certain range. Second, is operates as a voltage compensator while PCC voltage is out of range. Finally, the validity of this scheme is investigated through analysis of simulation and experimental results for a prototype active power filter system rated at 10KVA.

• 전기전자학회논문지
• /
• 제23권1호
• /
• pp.99-106
• /
• 2019

본 논문에서는 UPQC 시스템과 SVC를 결합한 새로운 형태의 보상장치를 제안하고자 한다. 기존의 UPQC는 직렬형 인버터, 병렬형 인버터, DC 링크로 구성되어 있어있으며 우수한 전력품질 보상 성능을 보이지만 높은 인버터 정격을 요구한다. 제안된 방식은 직렬형 인버터, 병렬형 인버터와 DC 링크 그리고 병렬형 인버터의 출력단에 결합된 SVC로 구성되어 있으며, 기존 UPQC에 비해 넓은 무효전력 보상 범위와 낮은 DC 링크 전압의 장점을 가지고 있다. 또한, SVC가 결합된 새로운 UPQC의 구성은 Matlab 시뮬레이션을 통해 성능을 검증하였다.

• 한국광학회지
• /
• 제33권2호
• /
• pp.59-66
• /
• 2022

각 편광소자의 방위각을 자유롭게 제어하는 자유형 구동방식에 기반한 뮬러행렬타원계(Mueller matrix ellipsometer, MME)를 제시한다. 보정기의 위상지연각 분산특성과 전기장 투과율비의 파장의존성을 고려하여 시료에 입사하는 빛의 편광상태를 최적화하기 위한 편광자의 방위각과 편광자측 보정기의 방위각 조합들을 제시한다. 시료로부터 출사하는 빛의 스톡스상수들을 빠르고 정확하게 측정할 수 있는 검광자의 방위각과 검광자측 보정기의 방위각 조합들, 그리고 출사하는 빛의 스톡스상수들을 구하는 수학적 표현들을 제시한다. 이 MME는 이상적이지 않은 4분파장 위상지연자를 적용할 수 있도록 보정기 선택의 폭을 넓혀주므로 깊은 자외선(deep ultraviolet)부터 근적외선(near infrared)에 이르는 매우 넓은 파장 대역에 걸쳐 작동하는 뮬러행렬 분광타원계(Mueller matrix spectroscopic ellipsometer, MMSE)의 제작과 활용을 용이하게 해 줄 것이다.

• 대한전기학회논문지:전력기술부문A
• /
• 제51권2호
• /
• pp.93-101
• /
• 2002

This paper describes a new method for determining the permissible operating range of DG(Distributed Generation) when DG is introduced into power distribution systems of which the voltage is controlled by LDC(Line Drop Compensator). Much of the DG installed during the next millennium will be accomplished through the reconstruction of the electric power industry. But in that case, it is difficult to properly maintain the terminal voltage of low voltage customers by using only LDC. This paper presents a method for determining the permissible operating range of DG for proper voltage regulation of power distribution systems with LDC. Proposed method has been applied to a 22.9 kV model and practical distribution systems, and its result is almost identical with the simulation result.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.847-848
• /
• 2006

R-type thermocouple(TC) interface circuits with cold-junction compensator(CJC) and its broken wires detection was developed. The circuit consists of a CJC device, a instrumentation amplifier(IA), and two resistor and a diode for broken wire detection. The experiment results show that the interface circuit has a good CJC function on the temperature range for $20^{\circ}C$ to $1400^{\circ}C$. At the range the output voltage of the IA was -14V when the TC was broken. At normal operation condition the output voltage of IA was 0V to 10V for the temperature range.

• 반도체디스플레이기술학회지
• /
• 제2권2호
• /
• pp.1-4
• /
• 2003

We have developed a rotating compensator spectroscopic ellipsometer (RCSE). As the ellipsometry measures a change in the polarization state of a light wave upon non-normal reflection from surface, the degree of sensitivity is enhanced greatly through the detection of relative phase change. RCSE acquires additional information from the non-ideal surface of sample and operates over the photon energy range from 1.5 to 4.5 eV. We applied RCSE to measure the optical properties of films and the line-width of patterned PR films on crystalline silicon.

• 반도체디스플레이기술학회지
• /
• 제3권1호
• /
• pp.31-34
• /
• 2004

We develop Mueller-matrix spectroscopic ellipsometry based on dual compensator configuration. This technique is very powerful for measuring surface anisotropy in nano-scale, especially when materials show depolarization. Dual-rotating compensator configuration is adopted with the rotational ratio of 5:3 originally developed by Collins et al[1]. The instrument can provide 250-point spectra over the wavelength range from 230 nm to 820 nm in one irradiance waveform with minimum acquisition time of Tc=10 s. In this work, the results obtained in transmission modes are presented for the initial attempt. We present calibration procedures to diagnose the system from the utilized data collected in transmission mode without sample. We expect that the instrument will have important applications in thin films and surfaces that have anisotropy and inhomogeneity.

• Tribology and Lubricants
• /
• 제14권4호
• /
• pp.15-22
• /
• 1998

Recently, the importance of variable displacement piston pump is increasing in industrial world. Especially, most consumers require various range of pressures and flow rates. Pressure compensator is a system controlling flow rate in piston pump at low cost and, therefore, satisfies the need of consumers. However, the system has serious problems, such as response and leakage. The response and leakage are affected by clearance between actuator piston and cylinder, roughness of surface, and spool overlap. In this paper, these effects are investigated experimentally, and optimal clearance and chamfer is obtained. While diameter of cylinder is fixed and diameter of actuator piston is changed in this experiment, response and leakage are measured. Also parameters such as roughness and processing accuracy are changed for piston of fixed clearance. Experimental setup modelled into several parts of actuator piston, cylinder, spool, and swash plate. Input pressure is changed by function generator and proportional valve. The result of this experiment shows that leakage increases very much in proportion to the increase of clearance, and especially leakage occurs enormously when clearance is more than 0.002. The response is not good because as clearance increases leakage increases and as clearance decreases viscous damping effect increases. Accordingly, it is found out that optimal clearance range exists for tile response, within about 0.0012∼0.0014, at this time. Futhermore, the better roughness and geometrical accuracy of actuator piston are, the smaller are leakage and friction. The paper informs that response and leakage are influenced by and geometrical accuracy of actuator piston, roughness of surface, and the clearance between actuator piston and cylinder, and that optimal design of actuator piston in the pressure compensator is possible.

• 대한기계학회논문집
• /
• 제16권7호
• /
• pp.1332-1340
• /
• 1992

본 연구에서는 제어기에 관심을 갖던 기존의 방법에서 탈피해서 포화요소에 촛점을 맞추어 와인드업 현상을 해결하는 방법을 제시하고자 한다. 이 방법은 단입 출력 시스템에서는 역계산방법(back calculation method)과 동일하나 제어기와 보상기 를 분리하여 설계한 후 보상기를 각각의 엑추에이터 앞에 설치함으로써 다입 출력 시 스템에 쉽게 적용될 수 있다는 점에서 새로운 제안이라 할 수 있다. 또한 제어기를 바꾸지 않고도 보상기만을 추가로 설치하여 와인드업을 방지할 수 있으므로 이미 설치 된 시스템에의 적용이 용이함도 특기할 만하다.