• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.77-77
• /
• 2017

Titanium and its alloys offer attractive properties in a variety of applications. These are widely used for the field of biomedical implants because of its good biocompatibility and high corrosion resistance. Titanium anodizing is often used in the metal finishing of products, especially those can be used in the medical devices with dense oxide surface. Based on SAE/AMS (Society of Automotive Engineers/Aerospace Material Specification) 2488D, it has the specification for industrial titanium anodizing that have three different types of titanium anodization as following: Type I is used as a coating for elevated temperature forming; Type II is used as an anti-galling coating without additional lubrication or as a pre-treatment for improving adherence of film lubricants; Type III is used as a treatment to produce a spectrum of surface colours on titanium. In this study, we have focused on Type II anodization for the medical (dental and orthopedic) application, the anodized surface was modified with gray color under alkaline electrolyte. The surface characteristics were analyzed with Focused Ion Beam (FIB), Scanning Electron Microscopy (SEM), surface roughness, Vickers hardness, three point bending test, biocompatibility, and corrosion (potentiodynamic) test. The Ti-6Al-4V alloy was used for specimen, the anodizing procedure was conducted in alkaline solution (NaOH based, pH>13). Applied voltage was range between 20 V to 40 V until the ampere to be zero. As results, the surface characteristics of anodic oxide layer were analyzed with SEM, the dissecting layer was fabricated with FIB method prior to analyze surface. The surface roughness was measured by arithmetic mean deviation of the roughness profile (Ra). The Vickers hardness was obtained with Vickers hardness tester, indentation was repeated for 5 times on each sample, and the three point bending property was verified by yield load values. In order to determine the corrosion resistance for the corrosion rate, the potentiodynamic test was performed for each specimen. The biological safety assessment was analyzed by cytotoxic and pyrogen test. Through FIB feature of anodic surfaces, the thickness of oxide layer was 1.1 um. The surface roughness, Vickers hardness, bending yield, and corrosion resistance of the anodized specimen were shown higher value than those of non-treated specimen. Also we could verify that there was no significant issues from cytotoxicity and pyrogen test.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.4
• /
• pp.97-110
• /
• 2007

A laser scanning technique has been attracting much attention as a new technology to acquire location information. This technique might be applicable to a wide range of areas, most notably in geomatics, due to its high accuracy of location and automation of high-density data acquisition. A alignment information extraction system on highway has been developed in this study by utilizing the advantages of the laser scanning technique. The system can accurately interpret the alignment information of highway and can be applied to actual works. To develop the alignment information extraction system on highway, an algorithm that can automatically separate a horizontal alignment into a straight line, a transition curve, and a circular curve was developed. It can increase its efficiency compared to the conventional methods. In addition, an algorithm that can automatically extract design elements of horizontal and vertical alignments of highway was developed and applied to an object highway. This yielded higher practicality with more accurate values compared to those from previous studies on the extraction of design elements of highway alignment. Furthermore, the extracted design elements were used to perform a virtual driving simulation on the object highway. Through this, data were provided for a visual judgment for judging visually whether the topography and structures were harmonized in a three-dimensional manner or not. The study also presents data that can serve as a basis to determine highway surface freezing sections and to analyze three-dimensional sight distance models. Through the establishment of a systematic database for diverse data on highway and the development of web-based operating programs, an efficient highway maintenance can be ensured and also they can provide important information to be used when estimating a highway safety in the future.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.2
• /
• pp.137-142
• /
• 2011

This study was conducted to establish the optimal electrolyte and bismuth concentrations using bismuth film electrode in laboratory and to confirm the possibilities of using this operational condition for heavy metals monitoring in field. In lab test, heavy metal measurement was not accurate more than 600 ppb when heavy metal (Pb, Cd, Zn) range 100~1,000 ppb was measured with bismuth 2,000 ppb. So, bismuth and heavy metal was reacted about 1:1 with ASV method. In electrolyte test, 0.1 M acetate buffer (pH 4.5), 0.1 M chloroacetate buffer (pH 2.0), 0.1 M HCl (pH 2.0), 0.1 M $HNO_3$ (pH 2.0) was tested. As a results, 0.1 M acetate buffer was most suitable in ASV measurement with bismuth film electrode. In field application, Pb, Cd and Zn was measured respectively 36~45 ppb, 84~91 ppb, 90~98 ppb when heavy metal (Pb, Cd, Zn) 100 ppb was spiked in field sample. These results were identified of matrix effect in field sample, So relationship between heavy metal measurement and matrix effects will be studied.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.1
• /
• pp.29-34
• /
• 2009

For several decades, many researchers have been involved in developing recycling methods for FRP boats. There are four basic classes of recycling covered in the literature. Despite of environmental problems(safety hazards), mechanical recycling of FRP boats, which involves shredding and grinding of the scrap FRP, is one of the simpler and more technically proven methods than incineration, reclamation or chemical ones. Because FRP is made up of reinforced fiber glass, it is very difficult to break into pieces. It also leads to secondary problem in recycling process, such as air pollution and unacceptable shredding noise level. Another serious problem of mechanical FRP recycling is very limited reusable applications for the residue. This study is to propose a new and efficient method which is more wide range applications and environment friendly waste FRP regenerating system. New system is added with the cyclone sorting machine for airborne pollutions and modified cutting system for several glass fiber chips sizes. It also has shown the FRP chip fiber-reinforced concrete and fiber-reinforced secondary concrete applications with the waste FRP boat to be more eligible than existing recycling method.

• The Korean Journal of Pesticide Science
• /
• v.16 no.4
• /
• pp.350-356
• /
• 2012

Performance of proficiency testing and the validation of analytical method was included a scheme of quality assurance in analytical chemistry laboratory to monitor a laboratory's performance abilities and produce consistently reliable data. This study was assessed the applicability of proficiency testing scheme proposed for analytical laboratories of pesticide product in domestic. The validation of analytical methods, stability and homogeneity for formulated pesticide products (emulsifiable concentrate) of emamectin benzoate and lufenuron was confirmed for the proficiency testing. The z-score of 33 participation laboratories for emamectin benzoate were that the numbers of outlier were 2 laboratories (6.0%), z-score outside the range from -3 to 3 designated "unaccptable" were 2 laboratories and z-score in the ranges -2 to -3 and 2 to 3 designated "questionable" were 3 laboratories (9.0%). Three laboratories (9.0%) showed the z-score designated "questionable" for lufenuron. The additional proficiency testing for various product types will be needed to establish the scheme of quality control.

• Journal of Preventive Medicine and Public Health
• /
• v.1 no.1
• /
• pp.79-86
• /
• 1968

This paper describes the incidence and some epidemiological features of drowning accident out of a series of our study on the epidemiology of various accidents in Korea. By the daily press it is apparent from the frequent reporting of swimming accidents that the incidence would be high. In the rural areas, there are, at present, about 1,250 artificial lakes and farm ponds to be utlized for rice production. The reservoirs, irrigation ditches and riversides are also used for recreation. In most places facilities for aquatic activities is meager, and safety measures for the prevention of drowning is not sufficiently enforced. In the survey crude data on drownings were collected from the concerned governmental statistic books for the period 1955 to 1967 which were compiled not in a uniform way. Drownings were classfied into two categories, one is accidental drowning, E 929 and the other is due to cataclysm, E 934, according to the WHO international classification of diseases. Epidemiological variables in relation to drowning accident were obtained through qualitative analysis of informations from the popular news papers. The following summary may be drawn; 1. The average number of deaths due to accidental drowning totaled 1,088 annually and the mortality rate per 100,000 population was 3.4, The 42.0% of all drownings were rescued and the remaining were not saved. 2. The sex ratio (M/F) of the victims for all ages was 5 to 1, which had a wide range of difference among the age groups. The young ages less than 20 years occupied 68.0% of all deaths. 3. The percentage distribution of the causes of accidents revealed 31.9% for careless swimming, 45.5% for unskilled, 10.6% for swimmer's cramp and 6.0% for drunked. The distribution of places where accidents occurred showed 88.0% for rivers, water reservoirs, irrigation ditches and 12.0% for regular swimming pools. The seasonal distribution of cases indicated 85.0% of the total were seen during the summer months, June-August, and 50.0% of them occurred on Sundays, 4. The average annual deaths due to cataclysm were 402 and mortality rate per 100,000 population was 1.6, but the number of victims due to cataclysm varied greatly each year. 5. The accident cases due to cataclysm were classified into 60.0% for injuries, 40.0% for deaths. The 26.8% of all deaths were missing cases. 6. The deaths due to either accidental drowning or cataclysm totaled 1,490, and the death rate per 100,000 for the whole country was 5.0.

• Fire Science and Engineering
• /
• v.31 no.2
• /
• pp.29-36
• /
• 2017

The design fire based on the heat release rate (HRR) of combustibles can significantly affect the assessment of fire safety in the performance-based design (PBD). In the present PBD, however, limited information in the foreign literature has been used without further verification due to the lack of fire information in domestic combustibles. The objective of this study is to provide information on the HRR and fire growth rate for various combustibles in residential and office spaces. To end this, the fire experiments were carried out with single and multiple combustibles. The peak HRR of combustibles used in the present study had a range of 36 kW~1,092 kW. The fire growth rates were also $0.003kW/s^2{\sim}0.0287kW/s^2$ and $0.003kW/s^2{\sim}0.0838kW/s^2$ for the residential and office spaces, respectively. In particular, a sofa had the highest fire risk in terms of the peak HRR and fire growth rate. Finally, a methodology for calculating the peak HRR in a space was proposed through correlation analysis between the peak HRR and exposed surface of various combustibles.

• Korean Journal of Food Science and Technology
• /
• v.31 no.3
• /
• pp.788-793
• /
• 1999

In this study, it was investigated that the isolation and identification of spoilage bacteria from contaminated aseptic packaged cooked rice, the potential for application of acidic electrolyzed saline solution (AESS) as water-for-cooked rice and the microbiological safety of AESS-based cooked rice. Five strains of Bacillus subtilis and a B. cereus strain among the total six isolates were partially identified by biochemical method and by Microbial Identification System (MIS). The bactericidal effect of AESS was similar as 0.1% NaOCl and 70% ethanol solution, or better than that. All of the test microorganisms except Bacillus spp. that were exposed to AESS for five seconds were destructed. The effect of AESS against Bacillus spp. was much better than that of the two solutions and all of them were destructed or inhibited on exposure for five minutes. The pH value of cooked rice prepared using AESS was in the range of 3.6 to 4.3 and was not almost changed through the storage period. Various concentrations of cell suspension of Bacillus isolates were inoculated to cooked rice, which were prepared with tap water and AESS, and stored at $37^{\circ}C$ for two weeks. The result was shown that the bacteria in tap water-based cooked rice appeared normal cell growth, while they were completely repressed in AESS-based cooked rice.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2009.06a
• /
• pp.84-85
• /
• 2009

New approaches for detecting, preventing and remedying environmental damage are important for protection of the environment. Procedures must be developed and implemented to reduce the amount of waste produced in chemical processes, to detect the presence and/or concentration of contaminants and decontaminate fouled environments. Contamination can be classified into three general types: airborne, surface and structural. The most dangerous type is airborne contamination, because of the opportunity for inhalation and ingestion. The second most dangerous type is surface contamination. Surface contamination can be transferred to workers by casual contact and if disturbed can easily be made airborne. The decontamination of the surface in the nuclear facilities has been widely studied with particular emphasis on small and large surfaces. The amount of wastes being produced during decommissioning of nuclear facilities is much higher than the total wastes cumulated during operation. And, the process of decommissioning has a strong possibility of personal's exposure and emission to environment of the radioactive contaminants, requiring through monitoring and estimation of radiation and radioactivity. So, it is important to monitor the radioactive contamination level of the nuclear facilities for the determination of the decontamination method, the establishment of the decommissioning planning, and the worker's safety. But it is very difficult to measure the surface contamination of the floor and wall in the highly contaminated facilities. In this study, the poly(styrene-ethyl acrylate) [poly(St-EA)] core-shell composite polymer for measurement of the radioactive contamination was synthesized by the method of emulsion polymerization. The morphology of the poly(St-EA) composite emulsion particle was core-shell structure, with polystyrene (PS)as the core and poly(ethyl acrylate) (PEA) as the shell. Core-shell polymers of styrene (St)/ethyl acrylate (EA) pair were prepared by sequential emulsion polymerization in the presence of sodium dodecyl sulfate (SOS) as an emulsifier using ammonium persulfate (APS) as an initiator. The polymer was made by impregnating organic scintillators, 2,5-diphenyloxazole (PPO) and 1,4-bis[5-phenyl-2-oxazol]benzene (POPOP). Related tests and analysis confirmed the success in synthesis of composite polymer. The products are characterized by IT-IR spectroscopy, TGA that were used, respectively, to show the structure, the thermal stability of the prepared polymer. Two-phase particles with a core-shell structure were obtained in experiments where the estimated glass transition temperature and the morphologies of emulsion particles. Radiation pollution level the detection about under using examined the beta rays. The morphology of the poly(St-EA) composite polymer synthesized by the method of emulsion polymerization was a core-shell structure, as shown in Fig. 1. Core-shell materials consist of a core structural domain covered by a shell domain. Clearly, the entire surface of PS core was covered by PEA. The inner region was a PS core and the outer region was a PEA shell. The particle size distribution showed similar in the range 350-360 nm.

• Korean Security Journal
• /
• no.17
• /
• pp.33-51
• /
• 2008

According to dictionary, the meaning of protection is "guard and protect" that means protecting the Protectee's safety in case of sudden attack or various accident and Security means all protecting activity including Protectee and place where he is in or will be as comprehensively meaning of safe. As you see in the definition, Protection and security is the act to protect or will to protect from a security-threat act. A security-threat act can be discussed in the range of the concept of a criminal act in Criminal Law. A security-threat act is based on criminal act in Criminal Law, we are going to review such a security-threat act in a point of view in a sphere of learning in today's remarkable a brain-neuro science and cognitive science based on cognitive psychology, and to use an analysis on such a security-threat act to make a foundation for a establishment of the scientific preventive social security countermeasure. To do so, First of all we are going to review a security-threat act based on criminal act in Criminal Law in a point of protection police logic view. Next, we are going to introduce how cognitive science understand about act of man before we analyse a threat act as one of an act of man in cognitive science point of view. Finally, we are going to discuss the need of cognitive scientific analyse in order to establish the Scientific Preventive Social-security Countermeasure at the same time we are going to analyse a threat act in a cognitive scientific view.