• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2012년 추계학술대회
• /
• pp.355-368
• /
• 2012

This paper, the hardness of the silicone rubber wire for 50, 60 degrees, 70 degrees High Temperature Vulcanizing (HTV) method using specimens were fabricated. In this paper, in order to investigate the dielectric properties of silicone rubber for wire specimens, the temperature range of $30^{\circ}C{\sim}170^{\circ}C$, the frequency range from 100Hz~4.5MHz report surveyed about the frequency and temperature dependent properties.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2012년 추계학술대회
• /
• pp.269-278
• /
• 2012

The purpose of VE (Value Engineering) activities is to come to an achievement of building necessary functions at the lowest possible cost. This study unfolds the co-VE activities which occurred between Gas Range and its partner company in the supply of Grill Body. The co-VE activity has accomplished the cost reduction of about 57 million through performing the function deployment of 12 parts and by devising the alternatives.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2011년도 추계학술대회
• /
• pp.551-556
• /
• 2011

This research presents an implementation strategy of Process Capability Index (PCI) according to the types of process characteristics. The types of process feature are classified as four perspectives of variation range, time period, error position, and process stage. The paper examines short-term or long-term PCI, within or between variation, position of precision or accuracy, and inclusion of measurement or calibration stage. Moreover, the study proposes normality test of unilateral PCI.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권1호
• /
• pp.113-132
• /
• 2005

With the demand for free-range products increasing and the pressure on the intensive poultry industry to improve poultry welfare especially in western countries, the number of free-range poultry farms has increased significantly. The USA, Australia and European countries have developed Codes of Practice for free-range poultry farming which detail the minimum standards of husbandry and welfare for birds. However, the performance and liveability of free-range birds needs to be improved and more knowledge is required on bird husbandry, feed supply, disease control and heat wave management. This review examines the husbandry, welfare, nutrition and disease issues associated with free-range poultry systems and discusses the potential of incorporating free-range poultry into a crop-pasture rotation system.

• 국제학술발표논문집
• /
• The 7th International Conference on Construction Engineering and Project Management Summit Forum on Sustainable Construction and Management
• /
• pp.260-262
• /
• 2017

During the construction of the project, all surveying and mapping work is collectively referred to as engineering survey. Therefore, the measurement work contains a wide range of content, in the engineering survey, design and construction management stage are involved. To the actual work, the project measurement runs through the project building in a number of stages, and provide basic services. This paper mainly through the analysis of engineering measurement at all stages of the role played by the measurement work in the project management work to do the following description.

• 지식경영연구
• /
• 제9권1호
• /
• pp.117-128
• /
• 2008

It is very crucial to establishing an evaluation framework for anayzing the investment effects of IT asset such as knowledge managment systems. However, evaluation by quantitative measures, in spite of its usefulness and reliability, may have weakness in examining wide range of effects of the IT investment. Hence, the purpose of this paper is to propose a novel framework to evaluate the performance in terms of wider range of informatization effects. To do so, knowledge management concepts has been adopted in the evaluation method, and Impact Of Investment(IOI) has been suggested. IOI is used to derive Value Of Investment(VOI) and then ROI.

• 대한안전경영과학회지
• /
• 제14권2호
• /
• pp.11-22
• /
• 2012

The purpose of this study was to compare drivers' postures with different car pedal systems and skilled levels. Fourteen subjects participated in this experiment and for three-dimensional analyses, six cameras (Proreflex MCU-240, Qualisys) were used to acquire raw data. The parameters were calculated and analyzed with Visual-3D. In conclusion, the patterns of pelvic, hip, knee and ankle joint angles were different as to pedal systems and skilled levels, and distal joints ROA pelvis have large angles. ROA(range of angle) of a double pedal system was small, but ROA of a single pedal system was large. These findings suggested that we should improve a present single pedal system.

• 보건행정학회지
• /
• 제26권1호
• /
• pp.71-78
• /
• 2016

The value of using health insurance claim database is continuously rising in healthcare research. In studies where comorbidities act as a confounder, comorbidity adjustment holds importance. Yet researchers are faced with a myriad of options without sufficient information on how to appropriately adjust comorbidity. The purpose of this study is to assist in selecting an appropriate index, look back period, and data range for comorbidity adjustment. No consensus has been formed regarding the appropriate index, look back period and data range in comorbidity adjustment. This study recommends the Charlson comorbidity index be selected when predicting the outcome such as mortality, and the Elixhauser's comorbidity measures be selected when analyzing the relations between various comorbidities and outcomes. A longer look back period and inclusion of all diagnoses of both inpatient and outpatient data led to increased prevalence of comorbidities, but contributed little to model performance. Limited data range, such as the inclusion of primary diagnoses only, may complement limitations of the health insurance claim database, but could miss important comorbidities. This study suggests that all diagnoses of both inpatients and outpatients data, excluding rule-out diagnosis, be observed for at least 1 year look back period prior to the index date. The comorbidity index, look back period, and data range must be considered for comorbidity adjustment. To provide better guidance to researchers, follow-up studies should be conducted using the three factors based on specific diseases and surgeries.

• 한국건설관리학회논문집
• /
• 제5권5호
• /
• pp.151-162
• /
• 2004

Current methods for construction site modeling employ large, expensive laser range scanners that produce dense range point clouds of a scene from different perspectives. Days of skilled interpretation and of automatic segmentation may be required to convert the clouds to a finished CAD model. The dynamic nature of the construction environment requires that a real-time local area modeling system be capable of handling a rapidly changing and uncertain work environment. However, in practice, large, simple, and reasonably accurate embodying volumes are adequate feedback to an operator who, for instance, is attempting to place materials in the midst of obstacles with an occluded view. For real-time obstacle avoidance and automated equipment control functions, such volumes also facilitate computational tractability. In this research, a human operator's ability to quickly evaluate and associate objects in a scene is exploited. The operator directs a laser range finder mounted on a pan and tilt unit to collect range points on objects throughout the workspace. These groups of points form sparse range point clouds. These sparse clouds are then used to create geometric primitives for visualization and modeling purposes. Experimental results indicate that these models can be created rapidly and with sufficient accuracy for automated obstacle avoidance and equipment control functions.

• 전기저널
• /
• 9호통권117호
• /
• pp.2-7
• /
• 1986