• Korean Journal of Applied Biomechanics
• /
• v.16 no.3
• /
• pp.137-148
• /
• 2006

The purpose of this study was to compare muscle activity in the lower extremity during walking wearing jogging and roller shoes. Twelve male middle school students (age: 15.0 yrs, height 173.7 cm, weight 587.7 N) who have no known musculoskeletal disorders were recruited as the subjects. Seven pairs of surface electrodes (QEMG8, Laxtha Korea, gain = 1,000, input impedance >$1012{\Omega}$, CMMR >100 dB) were attached to the right-hand side of the body to monitor the rectus femoris (RF), vastus medialis (VM), vastus lateralis (VL), biceps femoris (BF), tibialis anterior (TA), and medial (GM) and lateral gastrocnemius (GL) while subjects walked wearing roller and jogging shoes in random order at a speed of 1.1 m/s. An event sync unit with a bright LED light was used to synchronize the video and EMG recordings. EMG data were filtered using a 10 Hz to 350 Hz Butterworth band-passdigital filter and further normalized to the respective maximum voluntary isometric contraction EMG levels. For each trial being analyzed, five critical instants and four phases were identified from the recording. Averaged IEMG and peak IEMG were determined for each trial. For each dependent variable, paired t-test was performed to test if significant difference existed between shoe conditions (p<.05). The VM, TA, BF, and GM activities during the initial double limb stance and the initial single limb stance reduced significantly when going from jogging shoe to roller shoe condition. The decrease in EMG levels in those muscles indicated that the subjects locked the ankle and knee joints in an awkward fashion to compensate for the imbalance. Muscle activity in the GM for the roller shoe condition was significantly greater than the corresponding value for the jogging shoe condition during the terminal double limb stance and the terminal single limb stance. Because the subjects tried to keep their upper body weight in front of the hip to prevent falling backward, the GM activity for the roller shoe condition increased. It seems that there are differences in muscle activity between roller shoe and jogging shoe conditions. The differences in EMG pattern may be caused primarily by the altered position of ankle, knee, and center of mass throughout the walking cycle. Future studies should examine joint kinematics during walking with roller shoes.

• Progress in Medical Physics
• /
• v.22 no.2
• /
• pp.67-71
• /
• 2011

We evaluated the overall setup accuracy for the On-Board Imager (OBI, Varian Medical Systems Inc., Palo Alto, CA, USA), with attention to the laser, the gantry, and operator performance. We let experienced technicians place the marker block on the couch using a lock bar system, with alignment to the isocenter of the laser, every morning. A pair of radiographic images of the marker block was acquired at $0^{\circ}$ and $270^{\circ}$ angles to the kV arm to correct the position using a 2D/2D matching technique. Once the desired match was achieved, the couch was moved remotely to correct the setup error and the parameters were saved. The average for the vertical and the longitudinal displacements were 0.65 mm and 0.66 mm, and 0.01 mm for the lateral displacement. The average for the vertical and longitudinal displacements were statistically significant at the 0.05 level (p value=0.000 for both), while the p value for the lateral direction was 0.829. These results show that the tendencies to displacement in vertical and longitudinal directions occur through systematic error, while systematic error was not found in the lateral displacement. This daily overall evaluation is practical and easy to find the systematic and random errors in the setup system; however, a daily QA for laser and OBI alignment is still needed to minimize the systematic error in aligning patients.

• Journal of Radiation Protection and Research
• /
• v.37 no.1
• /
• pp.1-9
• /
• 2012

A year has passed since the nuclear power plant accident in Fukushima on March 11, 2011, and a survey for public perception on radiation by Korean people has been made. The methodological design was based on a quantitative survey and a frequency analysis was done. The analysis objects were survey papers (n=2,754pcs) answered by random ordinary citizens chosen from all over the country. The questionnaires, and study tool, were directly distributed and collected. A total of 40 questionnaires using a coefficient of Cronbach's ${\alpha}$ per each area was 'self perception of radiation' (0.620), 'radiation risk' (0.830), 'benefit from radiation' (0.781), 'radiation controlled' (0.685), 'informative source of radiation' (0.831), 'influence degree from Fukushima accident' (0.763), showing rather high score from all areas. As the result of the questionnaires, the knowledge of radiation concept was 69.50 out of 100 points, which shows a rather significant difference from the result of 'know well about radiation' (53.7%) and 'just know about radiation' (37.40%). According to the survey, one of the main reasons why radiation seems risky was that once exposed to radiation, it may not have negative impacts presently but, the next generation could see negative impacts (66.1%). About 41% of our respondents showed a negative position against the government's report on radiation while 39.5% of respondents said that we should stop running nuclear power in light of Fukushima nuclear power plant accident. This study was done for the first time by Korean people's public perception on radiation after the Fukushima nuclear power plant accident. We expect this might have significant contributions to the establishment of the government's policy on radiation.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.1
• /
• pp.81-87
• /
• 2010

The coverage ability is one of essential techniques for the Robotic Vacuum Cleaner (RVC). Most of the RVCs rely on random or regular pattern movement to cover a target space due to the technical difficulties to implement localization and map and constraints of hardwares such as controller and sensors. In this paper, we consider two main issues which are low computational load and using sensors with very limited sensing capabilities. First, in our approach, computing procedures to build map and detect the RVC's position are minimized by simplifying data obtained from sensors. To reduce computational load, it needs simply presenting an environment with objects of various shapes. Another isuue mentioned above is regarded as one of the most important problems in our approach, because we consider that many RVCs use low-cost sensor systems such as an infrared sensor or ultrasonic sensor with limited capabilities in limited range, detection uncertainty, measurement noise, etc. Methods presented in this paper are able to apply to general RVCs equipped with these sensors. By both simulation and real experiment, we evaluate our method and verify that the proposed method guarantees a complete coverage.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.3
• /
• pp.418-429
• /
• 2012

In this study we surveyed the packaging preferences of consumers for Korean rice cakes as current commercial products in Korea. The questionnaire was developed from a preliminary investigation of typical rice cake packaging patterns and sent to 2332 residents in Korea by random sampling mail. The questionnaire contained questions on the preferences of interior design in packaging, opening methods, individually separated types, printing position, packaging methods, and packaging materials such as paper and plastic. There were responses from 304 residents. The collected data was analyzed by an SPSS package program. Most of the packaging used for Korean rice cakes was plastic (58.9%) which was used for packaging materials and stretch wrap (42.9%) as packing methods. The results showed the preference was the perforated line type used by hand for opening a packaging and interior packaging design with 2~3 partitions. Most respondents expressed an interest in using individual packaging and having printing directly on the packaging. Also, the respondents preferred the packaging design that let them see the contents of a package. Based on the results of the questionnaire, this paper suggested that most consumers would prefer to choose a packaging system with a partition design in a plastic container, individually separated products, and a transparent container for Korean rice cakes. The results of packaging preferences could provide important information for suitable packaging development for Korean rice cakes. Further research should be conducted to improve the shelf life of Korean rice cakes with functional packaging systems such as modified atmosphere packaging or anti-microbial packaging.

• Smart Media Journal
• /
• v.2 no.4
• /
• pp.60-65
• /
• 2013

In this paper, we propose a high-resolution disparity map generation method using a low-resolution time-of-flight (TOF) depth camera and color camera. The TOF depth camera is efficient since it measures the range information of objects using the infra-red (IR) signal in real-time. It also quantizes the range information and provides the depth image. However, there are some problems of the TOF depth camera, such as noise and lens distortion. Moreover, the output resolution of the TOF depth camera is too small for 3D applications. Therefore, it is essential to not only reduce the noise and distortion but also enlarge the output resolution of the TOF depth image. Our proposed method generates a depth map for a color image using the TOF camera and the color camera simultaneously. We warp the depth value at each pixel to the color image position. The color image is segmented using the mean-shift segmentation method. We define a cost function that consists of color values and segmented color values. We apply a weighted average filter whose weighting factor is defined by the random walk probability using the defined cost function of the block. Experimental results show that the proposed method generates the depth map efficiently and we can reconstruct good virtual view images.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.9 no.3
• /
• pp.115-124
• /
• 1997

We measured the variance of eddy diffusion and associated ‘diffusion coefficients’ in coastal regions of Korea by observing the separation distances among multiple drifters deployed simultaneously at the same initial position. The variance of eddy diffusion was found to be proportional to $t^m$, where t is the time and m is a non-integer scaling exponent between 1.5 and 3.5. The observed scaling exponent of eddy diffusion cannot be reproduced by diffusion models employing constant eddy diffusivity. In this study, we applied fractal theory in simulating exponential increase of variance of eddy diffusion. We employed the fGn(fractional Gaussian noise) as a ‘modified’ random walks corresponding to the oceanic eddy diffusion. The variance of eddy diffusion, which corresponds to the fBm(fractional Brown motion) of our diffusion model, is proportional to $t^{2H}$, where H is Hurst scaling exponent. The temporal increase of the variance. with scaling exponent between 1 and 2, was successfully reproduced by our fractal diffusion model. However, our model cannot reproduce scaling exponent greater than 2. The scaling exponents greater than 2 are associated with the velocity shear of the mean flow.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.8 no.2
• /
• pp.45-51
• /
• 1990

DEM must have a high accuracy against the actual topographic model. A model which can compute heights responding to random plane position by using of the topographic data and interpolation must be constructed. Interpolation affected by the accuraccy of the observations included noise, which affected by the slop and curvature weight. Data smoothing is a method to reduce the noise. Average declination and area ratio are variable which result similarity in according to slope. But in local area, area ratio well shows a local change. This study try to classify the terrain by the declination to analysis the effects of the declination and curvature weights, and then to represent the most probable model. The result are following : In terrain classification by the slop, p16 and p24 were fitted in the plane surface fit p16 and S in the varying surface, and S and p24 in the irregular surface in classification by curvature, p24 and S were fitted in the plane or varying surface, and p16 in the irregular surface In case of hybrid, p16, p24 and S are fitted in the plane, varying and irregular surface respectively. Smoothing is the most effective in case of slope of 50 persentage and of curvature weight of 0.0015.

• Journal of Life Science
• /
• v.21 no.4
• /
• pp.502-508
• /
• 2011

The purpose of this study was to evaluate the methods of identifying zygotic seedlings of crosses between 'Morita unshiu' (Citrus. unshiu Marc.) and 'Ponkan' (C. reticulata Blanco). In order to investigate the frequency and position of zygotic seedlings and to determine the efficiency of zygotic seedling identification, random amplified polymorphic DNA (RAPD) and sequence-related amplified polymorphism (SRAP) were performed using UBC (9, 27, 229, 230, and 254) primers and F4/R27, F7/R14, F12/R10, and F44/R62 primer sets, respectively. A total of 37 putative zygotic seedlings out of 55 individuals were selected by RAPD and SRAP. The F7/R14 primer pair showed a screening ability of 45.5% (25/55), whereas the primer UBC27 revealed the highest efficiency of zygotic seedling identification (50.9%, 28/55). When both UBC27 and F7/R14 were properly used for selection of hybridized seedlings of 'Morita unshiu' (C. unshiu Marc.) and 'Ponkan' (C. reticulata Blanco), screening efficiency was increased to 60% (33/55) for putative zygotic seedlings. Thus, it is possible to select putative hybrid zygotic seedlings in an accurate and effective manner by RAPD and SRAP.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.1
• /
• pp.101-108
• /
• 2006

The purpose of this study was to compare GRF characteristics during walking wearing jogging and roller shoes. Twelve male middle school students (age: $15.0{\pm}0.0\;yrs$, height: $173.6{\pm}5.0\;cm$, weight: $587.6{\pm}89.3\;N$) who have no known musculoskeletal disorders were recruited as the subjects. Kinematic data from six S-VHS camcorders(Panasonic AG456, 60 fields/s) and GRF data from two force platform; (AMII OR6-5) were collected while subjects walked wearing roller and jogging shoes in random order at a speed of 1.1 m/s. An event sync unit with a bright LED light was used to synchronize the video and GRF recordings. GRF data were filtered using a 20 Hz low pass Butterworth. digital filter and further normalized to the subject's body weight. For each trial being analyzed, five critical instants and four phases were identified from the recording. Temporal parameters, GRFs, displacement of center of pressure (DCP), and loading and decay rates were determined for each trial. For each dependent variable, paired t-test was performed to test if significant difference existed between shoe conditions (p <.05). Vertical GRFs at heel contact increased and braking forces at the end of initial double limb stance reduced significantly when going from jogging shoe to roller shoe condition. Robbins and Waked (1997) reported that balance and vertical GRF are closely related It seems that the ankle and knee joints are locked in an awkward fashion at the heel contact to compensate for the imbalance. The DCP in the antero-posterior direction for the roller shoe condition was significantly less than the corresponding value for the jogging shoe condition. Because the subjects tried to keep their upper body weight in front of the hip to prevent falling backward, the DCP for the roller shoe condition was restricted The results indicate that walking with roller shoes had little effect on temporal parameters, and loading and decay rates. It seems that there are differences in GRF characteristics between roller shoe and jogging shoe conditions. The differences in GRF pattern may be caused primarily by the altered position of ankle, knee, and center of mass throughout the walking cycle. Future studies should examine muscle activation patterns and joint kinematics during walking with roller shoes.