• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1125-1131
• /
• 2009

This paper presents the evaluation of fatigue life for a journal box attached to rolling stock bogie under random dynamic loading condition. Because a journal box was under random dynamic loading conditions, the fatigue life assessment due to these loads requires the analysis considering the multiaxial effect of random dynamic loading. To do this work, the finite element analysis has been conducted to calculate random dynamic response using multiaxial acceleration data. Then, the fatigue life assessment of component has been conducted using vibration fatigue analysis applying the power spectral densities of the responses obtained through the FEA The results of fatigue life assessment were compared to the damage from the strain measurement. This study shows that can be evaluated the fatigue life assessment considering real service condition about a component attached to rolling stock bogie.

• Nuclear Engineering and Technology
• /
• 제29권6호
• /
• pp.476-487
• /
• 1997

To resolve several arguments raised for the current analysis of a structure like top hat, which is composed of flange, cylinder and plate, the dynamic response analysis is performed for the full and half models. The dynamic characteristics are investigated for full and half models and the results are compared between them. The responses such as bolt reactions and stresses due to random loading are also obtained using the analysis capabilities between commercial programs which have the routine for the random vibration analysis. Several general purpose structural analysis programs are used to get the response due to the random loadings. Also the application of the random loading and the effect of correlations such as fully correlated, partially correlated and fully uncorrelated cases are studied and the general directions for the generation of design loads due to random loading are suggested.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(4)
• /
• pp.223-228
• /
• 1996

To resolve several arguments raised for the current analysis of a structure like top hat, which is composed of flange, cylinder and plate, the dynamic response analysis is performed for the full and half models. The dynamic characteristics are investigated for full and half models and the results are compared between them. The responses such as bolt reactions and stresses due to random loading are also obtained using the analysis capabilities between commercial programs which have the routine for the random vibration analysis. Several general purpose structural analysis programs are used to get the response due to the random loadings. Also the application of the random loading and the effect of correlations are studied and the general directions for the generation of design load due to random loading are suggested.

• 동력기계공학회지
• /
• 제4권2호
• /
• pp.40-45
• /
• 2000

Some engineering materials are often known to have considerable spatial variation in their resisting strength and other properties. The objective of this study is to investigate the averaging effect and the applicability of extremal statistic for the statistical size effect. In the present study, it is assumed that the material property is a stationary random process in space. The theoretical autocorrelation function of the material strength are discussed for several correlation lengths. And, in order to investigate the statistical size effect, the material properties was simulated by using the non-Gaussian random process method. The material properties were plotted on the Weibull probability papers. The main results are summarized as follows: The autocorrelation function of the material properties are almost independent of the averaging length. The variance decreases with increasing the averaging length. As correlation length is smaller, the slope is larger. And also, it was found that Weibull statistics based on the weakest-link model could not explain the spatial variation of material properties with respect to the size effect satisfactory.

• Structural Engineering and Mechanics
• /
• 제55권3호
• /
• pp.461-472
• /
• 2015

The existence of initial imperfections in manufacturing or assembly of double-layer space structures having hundreds or thousands of members is inevitable. Many of the imperfections, such as the initial curvature of the members and residual stresses in members, are all random in nature. In this paper, the probabilistic effect of initial curvature imperfections in the load bearing capacity of double-layer grid space structures with different types of supports have been investigated. First, for the initial curvature imperfection of each member, a random number is generated from a gamma distribution. Then, by employing the same probabilistic model, the imperfections are randomly distributed amongst the members of the structure. Afterwards, the collapse behavior and the ultimate bearing capacity of the structure are determined by using nonlinear push down analysis and this procedure is frequently repeated. Ultimately, based on the maximum values of bearing capacity acquired from the analysis of different samples, structure's reliability is obtained by using Monte Carlo simulation method. The results show the sensitivity of the collapse behavior of double-layer grid space structures to the random distribution of initial imperfections and supports type.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2004년도 춘계종합학술대회
• /
• pp.682-684
• /
• 2004

Random Telegraph Signal(RTS)에 의한 1/f 잡음이 CMOS Ring Oscillator의 Phase Noise와 Jitter에 미치는 영향을 조사한다. 7단 Ring Oscillator의 각 노드에 병렬 연결된 10개의 Piece-Wise-Linear 전류원이 RTS 신호를 모델링 한다. RTS 전류원의 진폭과 Time Constant를 변화시키면서 Ring Oscillator 출력의 FFT 및 전력 스팩트럼 밀도, Jitter를 관찰한다. RTS 전류원의 진폭은 Phase Noise의 폭을 증가시키고 결과적으로 Jitter의 크기도 증가 시키는 것이 확인 되었다. 그리고 RTS Time Constant가 짧아질수록 출력 신호의 FFT peak의 폭이 커지고 Cycle to Cycle Jitter 값이 증가하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.141-146
• /
• 2000

Crack closure and growth behavior of physically short fatigue cracks under random loading are investigated by performing narrow- and wide-band random loading tests for various stress ratios. The importance of the crack closure phenomenon is examined by predicting the growth lives of short cracks using obtained crack opening behavior. Artificially prepared two-dimensional, short through-thickness cracks are used. The crack opening load of short cracks is much lower under random loading than under constant-amplitude loading corresponding to the largest load cycle in a random load history. This result indicates that the largest load cycle in a random load history has an effect to enhance crack opening of short cracks. Most of the life prediction ratios are within the factor of 2 scatter band except several data at very short crack sizes, indicating that crack growth predictions based on the measured crack opening data are excellent. From the results obtained in this study, it can be concluded that crack closure is the primary factor governing fatigue crack growth of short cracks under random loading as well as under constant-amplitude loading.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권10호
• /
• pp.523-530
• /
• 2020

The efficient market hypothesis explains the random walk hypothesis suggesting that stock prices are independent of each other, hence, it is impossible to earn abnormal profits. The positive effect of a well-functioning and highly efficient stock market on the performance of an economy motivated the Philippine Stock Exchange to pursue massive modernization initiatives. This research provides evidence of the existence of random walk in the Philippine stock market employing the Augmented Dickey-Fuller (1981) and Phillips-Perron (1988) unit root tests, the Lo-MacKinlay's (1988) conventional variance ratio test, and Chow-Denning's (1993) simple multiple variance ratio test. Results of the ADF and PP unit root tests confirm the necessary condition for a random walk. The Chow-Denning (1993) maximum /z/ statistic and the Wald test statistic as in Richardson and Smith (1991) for the joint hypotheses and the Lo and MacKinlay (1988) individual statistics variance ratio test generally accepted the null hypothesis of a random walk. That is, the unit root and variance ratio tests consistently indicate that the null hypothesis of random walk cannot be rejected. The existence of a random walk in weak-form efficiency can be attributed to market liquidity as a result of continuous development and modernization of the Philippine equity market.

• Journal of the Korean Data and Information Science Society
• /
• 제27권5호
• /
• pp.1241-1251
• /
• 2016

일정한 시간 간격으로 임의의 점프크기가 계속 누적되는 이산시간 확률보행을 고려한다. 각 시점에서의 점프크기가 이전 시점의 점프크기에 종속되어 결정되는 상관 확률보행과 각 시점에서의 점프크기가 이전 시점의 점프크기와 무관하게 독립적으로 결정되는 무상관 확률보행의 점근적 평균을 각각 계산한다. 그리고 상관 확률보행과 무상관 확률보행을 임의적으로 혼합하여 결합하거나 또는 일정한 패턴에 따라 주기적으로 반복하여 결합하는 혼합 확률보행의 점근적 평균 식을 유도한다. 각 확률보행의 점근적 평균은 0으로 공정한 게임을 나타내지만 두 확률보행을 결합한 혼합 확률보행의 점근적 평균은 음수가 되어 지는 게임이 되거나 또는 양수가 되어 이기는 게임이 되는 파론도 역설 현상이 나타남을 확인하고 해당되는 각 모수의 범위를 찾는다.

• 한국항행학회논문지
• /
• 제27권4호
• /
• pp.457-462
• /
• 2023

파장 분할 다중 신호와 같은 대용량 광 신호를 장거리 전송하기 위하여 사용되는 MSSI (mid-span spectral inversion)와 분산 제어가 결합된 시스템에서의 융통적인 링크 구성을 제안하고 색 분산과 비선형 왜곡 보상 효과를 높일 수 있는 구체적 방법을 살펴보았다. 분산 제어 링크 구성의 융통성을 높이기 위해 제안된 분산 맵은 'random-inverse' 구조를 갖는다. 즉 광 위상 공액기까지의 전반 구획의 각 광성유 스팬의 RDPS는 랜덤하게 분포되고 후반 구획의 RDPS 분포는 전반 구획의 분포 패턴을 반전하는 구성의 분산 맵이다. 제안된 분산 맵은 RDPS의 랜덤 분포를 가지기는 하지만 결과적으로 광 위상 공액기를 중심으로 분산 프로파일이 대칭이 되는 점에 기인하여 왜곡 보상 효과가 개선되는 것을 확인하였다. 'random-inverse' 구조의 분산 맵에서 각 광섬유 스팬에 할당되는 RDPS의 크기가 큰 경우에서왜곡된 파장 분할 다중 신호의 보상 효과가 더욱커지는 것도 동시에 확인하였다.