• Title/Summary/Keyword: Ramus of mandible

Search Result 243, Processing Time 0.03 seconds

SURGICAL CORRECTION OF MAXILLOFACIAL DEFORMITY WITH FIBROUS-OSSEOUS LESION OF MANDIBLE USING THE INTRAORAL VERTICAL RAMUS OSTEOTOMY (하악의 섬유-골성 병소를 가진 안면 기형에서 구내 상행지 수직 골절단술을 사용한 수술적 교정)

  • Kim, Hyung-Jin;Hong, Jong-Rak
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • v.31 no.6
    • /
    • pp.496-500
    • /
    • 2005
  • A 22-year-old male patient had developed a submasseteric abscess secondary to a mandibular osteomyelitis at the age of 7 years old. The initial presentation at that time seems to be acute suppurative parotitis. The computed tomographic scans taken before surgery demonstrated diffuse deformity, sclerotic change and osteolytic lesion in the mandible. There was no marrow space on both sides of mandibular ramus and thin-walled cortical bone was seen. So, from the results of the computed tomography, the surgery was performed intraoral vertical ramus osteotomy (IVRO) instead of performing the more commonly used bilateral sagittal split ramus osteotomy (BSSRO). In this report, we present a case of surgical correction of mandibular prognathism with fibrous-osseous lesion of mandible with using IVRO.

A FINITE ELEMENT ANALYSIS OF THE STRESS DISTRIBUTION AND DISPLACEMENT OF an in-vitro HUMAN MANDIBLE TO THE ORTHOPEDIC FORCE (정형력(整形力)에 대(對)한 하악골내(下顎骨?)의 응력분산(應力分散)과 변위(變位)에 관(關)한 유한요소법적(有限要素法的) 분석(分析))

  • Choue, Ho Koo
    • The korean journal of orthodontics
    • /
    • v.14 no.1
    • /
    • pp.75-92
    • /
    • 1984
  • This study attempted to analyze the distribution of stress, to examine the bending effect in the mandible according to the pulling directions and determine on which pulling directions are adequate when an orthopedic force was applied to the mandible. An orthopedic force, 500gm, was applied to the gnathion, one point of the chin area, in three directions. The three directions were ; high puli' from gnathion to the center of condyle head, and vertical pull, from gnathion to a parallel line with the posterior border of the ramus, and medium pull, from the gnathion to a parallel line with the lower border of mandible. The distribution of principal stress, bending moment and amount of displacement within the mandible was analyzed by a 3-dimensional finite element method and that of the various portions of mandible were computed and compared according to the pulling directions. The results were as follows : 1. The bending moment of each part of a mandible has been found to be markedly larger in case of vertical pull than in case of either high pull or medium pull. In vertical pull the bending moment turned out to largest at the condyle head and neck portion, the gonial angle portion, the coronoid portion and the ascending ramus portion, respectively, while comparatively large at the cuspid and bicuspid portion and the first molar portion. In case of high pull it was largest at the gonial angle portion and becoming smaller at the coronoid portion, the ascending ramus portion, the condyle head and neck portion, and the cuspid and bicuspid portion, in that order. In case of medium pull, however, the bending moment was largest at the condyle head and neck portion, becoming smaller at the first molar portion, the ascending ramus portion, the coronoid portion, the cuspid and bicuspid portion, and gonial angle portion, in that order. 2. As for the bending effect it was calculated to be mostly oriented downward at the mandibular body and backward at the mandibular ramus in both high pull and vertical pull. In case of medium pull it was oriented upward at the mandibular body and forward at the mandibular ramus. 3. The bending effect also turned out to be mostly oriented outward in case of high pull and medium pull, and inward in vertical pull. 4. At the mandibular body and ramus, the bending effect in the upward-downward direction and that in the forward-backward direction were found to be larger than in the inward-outward direction. 5. If and when we expect any correcting effect on the mandibular protrusion by means of the chin cup appliance, we can say sure as conclusion that high pull and vertical pull are more effective than medium pull.

  • PDF

Correction of malocclusion using sliding fibula osteotomy with sagittal split ramus osteotomy after mandible reconstruction

  • Lee, Dong-Hun;Kim, Seong Ryoung;Jang, Sam;Ahn, Kang-Min;Lee, Jee-Ho
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • v.42
    • /
    • pp.21.1-21.6
    • /
    • 2020
  • Background: Fibula free flap mandible reconstruction is the standard procedure after wide resection of the mandible. Establishment and maintenance of normal occlusion are important in mandible reconstruction both intraoperatively and after surgery. However, scar formation on the surgical site can cause severe fibrosis and atrophy of soft tissue in the head and neck region. Case presentation: Here, we report a case of severe soft tissue atrophy that appeared along with scar formation after mandibular reconstruction through the fibular free flap procedure. This led to normal occlusion collapse after it was established, and the midline of the mandible became severely deviated to the affected side that was replaced with the fibula free flap, leading to facial asymmetry. We corrected the malocclusion with a secondary operation: a sagittal split ramus osteotomy on the unaffected side and a sliding osteotomy on the previous fibula graft. After a healing time of 3 months, implants were placed on the fibula graft for additional occlusal stability. Conclusion: We report satisfactory results from the correction of malocclusion after fibula reconstruction using sliding fibula osteotomy and sagittal split ramus osteotomy. The midline of the mandible returned to its original position and the degree of facial asymmetry was reduced. The implants reduced difficulties that the patient experienced with masticatory function.

Developmental salivary gland depression in the ascending mandibular ramus: A cone-beam computed tomography study

  • Chen, Christine A.;Ahn, Yoonhee;Odell, Scott;Mupparapu, Mel;Graham, David Mattew
    • Imaging Science in Dentistry
    • /
    • v.46 no.3
    • /
    • pp.223-227
    • /
    • 2016
  • A static, unilateral, and focal bone depression located lingually within the ascending ramus, identical to the Stafne's bone cavity of the angle of the mandible, is being reported. During development of the mandible, submandibular gland inclusion may lead to the formation of a lingual concavity, which could contain fatty tissue, blood vessels, or soft tissue. However, similar occurrences in the ascending ramus at the level of the parotid gland are extremely rare. Similar cases were previously reported in dry, excavated mandibles, and 3 cases were reported in living patients. A 52-year-old African American male patient was seen for pain in the mandibular teeth. Panoramic radiography showed an unusual concavity within the left ascending ramus. Cone-beam computed tomography confirmed this incidental finding. The patient was cleared for the extraction of non-restorable teeth and scheduled for annual follow-up.

Unilateral intraoral vertical ramus osteotomy based on preoperative three-dimensional simulation surgery in a patient with facial asymmetry

  • Lee, Jae-Won;Kim, Moon-Key;Kang, Sang-Hoon
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • v.40 no.1
    • /
    • pp.32-36
    • /
    • 2014
  • Preoperative surgical simulation in orthognathic surgery has progressed in recent years; the movement of the mandible can be anticipated through three-dimensional (3D) simulation surgery before the actual procedure. In this case report, the mandible was moved to the intended postoperative occlusion through preoperative surgical 3D simulation. Right-side condylar movement change was very slight in the surgical simulation, suggesting the possibility of mandibular surgery that included only left-side ramal osteotomy. This case report describes a patient with a mild asymmetric facial profile in which the mandibular menton had been deviated to the right and the lips canted down to the left. Before surgery, three-dimensional surgical simulation was used to evaluate and confirm a position for the condyle as well as the symmetrical postoperative state of the face. Facial asymmetry was resolved with minimal surgical treatment through unilateral intraoral vertical ramus osteotomy on the left side of the mandible. It would be a valuable complement for the reduction of the surgical treatment if one could decide with good predictability when an isolated intraoral vertical ramus osteotomy can be done without a compensatory osteotomy on the contralateral side.

Treatment of osteomyelitis in the rear area of the lingula of the mandible using sagittal split ramus osteotomy: a case report

  • Jung, Tae-Young
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • v.41 no.4
    • /
    • pp.203-207
    • /
    • 2015
  • Osteomyelitis is classified into three groups according to its origin: osteomyelitis that originates from the blood supply, osteomyelitis related to bone disease or vascular disease, and osteomyelitis related to a local infection of dental or non-dental origin. The present case involved osteomyelitis related to a local infection of dental origin and was located in the rear area of the lingula of the mandible. We decided to use sagittal split ramus osteotomy to access the osteomyelitis area. Under general anesthesia, we successfully performed surgical sequestrectomy and curettage via sagittal split ramus osteotomy.

Covariance patterns between ramus morphology and the rest of the face: A geometric morphometric study

  • Marietta Krusi;Demetrios J. Halazonetis;Theodore Eliades;Vasiliki Koretsi
    • The korean journal of orthodontics
    • /
    • v.53 no.3
    • /
    • pp.185-193
    • /
    • 2023
  • Objective: The growth and development of the mandible strongly depend on modeling changes occurring at its ramus. Here, we investigated covariance patterns between the morphology of the ramus and the rest of the face. Methods: Lateral cephalograms of 159 adults (55 males and 104 females) with no history of orthodontic treatment were collected. Geometric morphometrics with sliding semi-landmarks was used. The covariance between the ramus and face was investigated using a two-block partial least squares analysis (PLS). Sexual dimorphism and allometry were also assessed. Results: Differences in the divergence of the face and anteroposterior relationship of the jaws accounted for 24.1% and 21.6% of shape variation in the sample, respectively. Shape variation was greater in the sagittal plane for males than for females (30.7% vs. 17.4%), whereas variation in the vertical plane was similar for both sexes (23.7% for males and 25.4% for females). Size-related allometric differences between the sexes accounted for the shape variation to a maximum of 6% regarding the face. Regarding the covariation between the shapes of the ramus and the rest of the face, wider and shorter rami were associated with a decreased lower anterior facial height as well as a prognathic mandible and maxilla (PLS 1, 45.5% of the covariance). Additionally, a more posteriorly inclined ramus in the lower region was correlated with a Class II pattern and flat mandibular plane. Conclusions: The width, height, and inclination of the ramus were correlated with facial shape changes in the vertical and sagittal planes.

Alveolar rhabdomyosarcoma involving the mandibular ramus and its surrounding tissues (하악에 발생한 횡문근육종)

  • Yoon Suk-Ja;Kang Byung-Cheol
    • Imaging Science in Dentistry
    • /
    • v.34 no.2
    • /
    • pp.111-116
    • /
    • 2004
  • Rhabdomyosarcoma, when it occurs in the head and neck, is primarily found in children. Alveolar rhabdomyosarcoma is rarely seen in the oral lesion, comparing to the embryonal and the pleomorphic variants. This is a report of a case of alveolar rhabdomyosarcoma in the mandible in a ten-year old girl who complained of a non-painful swelling on the right cheek. The right lower 1st molar was mobile. Her radiographs revealed an extensive radiolucency with somewhat irregular border on the right mandibular ramus. The right mandibular 1st and 2nd molars lost their lamina dura and were floating. CT images revealed smooth-outlined soft tissue mass occupying the pterygomandibular space, the infratemporal space, and the masseteric muscle with thinning and perforation of the right mandibular angle and ramus. Histopathological and immunohistochemical findings established the final diagnosis of alveolar rhabdomyosarcoma.

  • PDF

Traumatic Internal Maxillary Artery Pseudoaneurysm Caused by Fracture of the Mandible Ramus: A Case Report (턱뼈가지의 골절로 인한 내상악동맥의 가성동맥류 1례)

  • Han, Chang Dok;Kim, Young Hyo;Kim, Kyu-Sung;Choi, Hoseok
    • Journal of Trauma and Injury
    • /
    • v.25 no.1
    • /
    • pp.32-35
    • /
    • 2012
  • Traumatic pseudoaneurysms in the head and neck region are very rare. Particularyly, pseudoaneurysms of the internal maxillary artery are known to be very rare. The authors report a 20-year old male who was diagnosed as having a pseudoaneurysm of the internal maxillary artery. The cause was assumed to be a mandible ramus fracture. When he visited our emergency room, we did not consider a pseudoaneurysm because of his other life-threatening conditions. Fortunately, he re-visited our hosipital before the aneurysm ruptured. He was diagnosed with angiography and was treated by using embolization with glue. The rupture of the pseudoaneurysm could have caused a life-threatening hemorrhage.

Primary xanthoma inferior to the right mandibular third molar and intraoral vertical ramus osteotomy

  • Kim, Min-Ji;Kang, Min-Jun;Kang, Sang-Hoon
    • Imaging Science in Dentistry
    • /
    • v.52 no.2
    • /
    • pp.231-238
    • /
    • 2022
  • Intraosseous xanthoma of the mandible is a rare benign disorder. A 17-year-old male patient presented with a suspected abscess in the right mandibular third molar, detected on a panoramic radiograph. The patient had no history of systemic or lipid-related metabolic diseases and complained of no specific symptoms or pain. A radiographic examination revealed a heterogeneous radiolucency extending from the apical to the distal aspect of the right mandibular third molar tooth germ. The lesion measured 9 × 16 × 24 mm (antero-posterior × mediolateral × supero-inferior) and showed a relatively well-defined, multilocular, foamy appearance with hyperostotic borders spreading to the inferior alveolar nerve canal. After excisional biopsy, a diagnosis of central xanthoma was made. The lesion recurred, and intraoral vertical ramus osteotomy was done near the lesion. For the treatment of xanthoma of the mandible, extensive and delicate surgical treatment under general anesthesia should be considered.