• 한국컴퓨터정보학회논문지
• /
• 제17권1호
• /
• pp.211-218
• /
• 2012

전 세계적으로 화석연료의 많이 사용이 증가되고 있으며 이로 인해 온실가스가 배출되어 지구 온난화와 환경오염이 심각해지고 있는 실정이다. 지구의 환경오염을 줄이기 위해서 무공해 청정에너지인 신재생에너지에 대한 관심이 증가되는 추세인데, 그중에서도 풍력발전은 환경오염 물질을 배출하지 않고, 자원량이 무한대이기 때문에 많은 관심을 받고 있다. 하지만, 풍력발전은 전력 생산량이 불규칙한 단점을 갖고 있어 풍력 터빈의 손상과 전력 생산량이 불규칙적인 문제를 야기하여 이러한 문제점을 보완하기 위해 풍력 발전량을 정확하게 예측하는 것이 중요하다. 풍력 발전량을 정확하게 예측하기 위해서 전력 생산량이 급증 또는 급감하는 것을 의미하는 ramp의 특성을 잘 활용해야 한다. 이 논문에서는 예측의 정확도를 높이기 위하여 다계층 신경망을 이용해 예측모델을 구축하였다. 구축된 예측모델은 흔히 사용되는 풍속, 풍향 속성뿐만 아니라 Power Ramp Rate(PRR) 속성까지 사용하였다. 구축된 풍력 발전량 예측모델은 앞서 말한 세 가지 속성을 모두 사용한 경우, 두 속성을 조합하여 사용한 경우 총 4가지 예측모델을 구축하였다. 구축된 4가지 예측모델을 성능평가 한 결과 PRR, 풍속, 풍향의 속성 모두를 사용한 예측모델의 예측 값이 풍력 터빈에서 관측된 관측 값에 가장 근접하였다. 그로 인해 PRR 속성을 사용하면 풍력 발전량의 예측 정확도를 향상 시킬 수 있었다.

• 한국수정란이식학회지
• /
• 제16권2호
• /
• pp.133-138
• /
• 2001

개의 인공수정에 사용할 정자의 보존방법을 확립하기 위하여, 동결속도와 응해 온도를 설정하여 적절한 동결방법을 정립하고자 본 실험을 실시하여 다음과 같은 결과를 얻었다. 동결의 방법에 있어서는 액체질소의 표면으로부터 17 cm 높이에서 동결하는 -3$^{\circ}C$/min의 동결속도로 실시하여 37$^{\circ}C$에서 2분간 응해하는 방법이 가장 좋은 결과를 보였다. 생존성과 운동성에 있어서의 차이는 없지만 첨체의 intact한 비율은 약간 낮은 결과를 보였으며, 이의 보완을 위해, 액체질소 표면으로부터 10cm와 17cm의 높이를 세분화하여 동결속도를 설정한 후보다 나은 정액동결방범을 찾는다면 동결정액을 이용한 인공수정의 수태율은 더욱 향상될 수 있을 것으로 사료된다.

• International Journal of Reliability and Applications
• /
• 제18권2호
• /
• pp.21-44
• /
• 2017

Accelerated life tests (ALTs) are frequently used in manufacturing industries to evaluate the reliability of products within a reasonable amount of time and cost. Test units are subjected to elevated stresses which yield quick failures. Most of the previous works on designing ALT plans are focused on tests that involve a single stress. Many times more than one stress factor influence the product's functioning. This paper deals with the design of optimum modified ramp-stress ALT plan for Burr type XII distribution with Type-I censoring under two stress factors, viz., voltage and switching rate each at two levels- low and high. It is assumed that usage time to failure is power law function of switching rate, and voltage increases linearly with time according to modified ramp-stress scheme. The cumulative exposure model is used to incorporate the effect of changing stresses. The optimum plan is devised using D-optimality criterion wherein the ${\log}_{10}$ of the determinant of Fisher information matrix is maximized. The method developed has been explained using a numerical example and sensitivity carried out.

• Journal of Information Display
• /
• 제2권4호
• /
• pp.39-45
• /
• 2001

The voltage controlled ramp(VCR) waveform has recently been introduced in the reset period prior to addressing for plasma display. However, this method results in the oscillation of the gap voltage when the ramp rate is increased so as to reduce reset period. In this paper a current controlled ramp(CCR) waveform method in the reset period is suggested. This method can suppress the oscillation of gap voltage under the condition of shorter ramp time. Moreover, the reset time can be reduced by about 30 % compared with the VCR method under the same background luminance.

• Nuclear Engineering and Technology
• /
• 제41권2호
• /
• pp.187-198
• /
• 2009

In this paper, three power ramp tests performed on high burn-up Re-crystallized Zircaloy2 - UO2 BWR fuel rods (56 to 63 MWd/kgU) within the SCIP project are simulated with METEOR and ALCYONE 3D. Two of the ramp tests are of staircase type up to Linear Heat Rates of 420 and 520 W/cm and with long holding periods. Failure of the 420 W/cm fuel rod was observed after 40 minutes. The third ramp test consisted of a more standard ramp test with a constant power rate of 80 W/cm/min up to 410 W/cm with a short holding time. The tests were first simulated with the METEOR 1D fuel rod code, which gave accurate results in terms of profilometry and fission gas releases. The behaviour of a fuel pellet fragment and of the cladding piece on top of it was then investigated with ALCYONE 3D. The size and the main characteristics of the ridges after base irradiation and power ramp testing were recovered. Finally, the failure criteria validated for PWR conditions and fuel rods with low-to-medium burn-ups were used to analyze the failure probability of the KKL rodlets during ramp testing.

• 한국항만학회지
• /
• 제13권2호
• /
• pp.333-350
• /
• 1999

Today freeway is thought to be a very important transportation facility carrying tremendous traffic flow as the main corridor within the area of between the areas. However freeway is experiencing severe congestion and accidents by increased entrance ramp flow especially at peak time period. Ramp meters on the freeway entrance ramps that supply traffic to the freeway in a measured or appropriately regulated amount are needed for alleviating freeway congestion. Because ramp meters can be operated to discharge traffic at a measured or regulated rate thus maintaining more uniform speed on the mainline section maximizing the throughput to the freeway within the capacity of a downstream bottleneck and reducing the congestion related accidents. Thus the objectives in this study were to analyze the traffic characteristics on the freeway I-94 with ramp metering system before/after ITS technology in Detroit (Michigan) area compare shifts of the traffic characteristics on the freeway I-94 before/after ITS technology and finally suggest a better ramp metering strategy for the freeway system The following results were obtained: i)Flow occupancies and speeds on the mainline merge section of freeway were shown to be a big difference depending on the peak periods areas and directions based on the distribution of traffic flow characteristics on the freeway. ii)Reduced speed was shown to be more than 5 mph and ramp flow was also shown to be more than 240 vph at peak periods if there was the ramp metering system constructed on the freeway. iii)Ramp metering system was shown to be optimally operated on the freeway if ramp flow could be maximized within the range of over 900 vph and reduced occupancy could be also maximized by no more than 2 percent at peak periods. iv)The average flows on the freeway after the ITS technology were shown to be a decrease of over 20% depending on the peak periods areas and directions when compared with those flow on the freeway before the ITS technology. over 20% depending on the peak periods areas and directions when compared with those speeds on the freeway before the ITS technology. vi)The average metering rates on the freeway after the ITS technology were shown to be an increase of over 10% depending on the peak periods areas and directions when compared with those metering rates on the freeway before the ITS technology.

• 전기학회논문지
• /
• 제60권7호
• /
• pp.1299-1304
• /
• 2011

A wind turbine (WT) should be shut down as fast as possible to minimize its own damage in a storm-driven situation. Shutdown of a large wind farm requires a power grid to have a ramp-up capability large enough to balance between generation and consumption of electrical energy. This paper proposes a supervised shutdown algorithm of a wind farm to meet a required ramp-down rate in a grid code in the case of a storm-driven situation. The information on the speed and the direction of wind is measured at a wind mast (WM) installed around a wind farm. If the wind speed exceeds a cut-out speed, the number of WTs to be shut down simultaneously is decided to meet a required ramp-down rate of a grid-code. Arrival times to each WT from the WM are calculated and sorted in the order of time. Then a sequence of groups is generated. The shutdown start/end times of each group are decided to avoid superposition between adjacent two groups. The performance of the proposed shutdown algorithm is verified under various storm scenarios. Results indicate that the proposed algorithm can not only protect the wind farm in the case of a storm-driven situation but also meet the required ramp-down rate. In addition, the algorithm can produce more energy than that of a conventional shutdown algorithm.

• Journal of Electrical Engineering and Technology
• /
• 제10권4호
• /
• pp.1441-1452
• /
• 2015

This paper proposes a new Hybrid Particle Swarm Optimization (HPSO) method that integrates the Evolutionary Programming (EP) and Particle Swarm Optimization (PSO) techniques. The proposed method is applied to solve Economic Dispatch(ED) problems considering prohibited operating zones, ramp rate limits, capacity limits and power balance constraints. In the proposed HPSO method, the best features of both EP and PSO are exploited, and it is capable of finding the most optimal solution for the non-linear optimization problems. For validating the proposed method, it has been tested on the standard three, six, fifteen and twenty unit test systems. The numerical results show that the proposed HPSO method is well suitable for solving non-linear economic dispatch problems, and it outperforms the EP, PSO and other modern metaheuristic optimization methods reported in the recent literatures.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권10호
• /
• pp.517-521
• /
• 2001

The voltage controlled ramp(VCR) waveform has recently been introduced in the reset period prior to addressing for plasma display. However, this method shows the oscillation of gap voltage when the ramp rate is increased in order to reduce reset period. In this paper a current controlled ramp(CCR) waveform method is suggested. This method can suppress the oscillation of gap voltge under the condition of shorter ramp time. Moreover, the reset time can be reduced about 30% compared with VCR method under the same background luminance.

• International Journal of Reliability and Applications
• /
• 제17권1호
• /
• pp.85-105
• /
• 2016

In this paper accelerated life testing is incorporated in quality control technique of acceptance sampling plan to induce early failures in high reliability products.Stress under accelerated condition can be applied in constant-stress, step-stress and progressive-stress or combination of such loadings. A ramp-stress results when stress is increased linearly (from zero) with time. In this paper optimum failure-censored ramp-stress accelerated life test sampling plan for log-logistic distribution has been formulated with cost considerations. The log-logistic distribution has been found appropriate for insulating materials. The optimal plans consist in finding optimum sample size, sample proportion allocated to each stress, and stress rate factor such that producer's and consumer's interests are safeguarded. Variance optimality criterion is used when expected cost per lot is not taken into consideration, and bilevel programming approach is used in cost optimization problems. The methods developed have been illustrated using some numerical examples, and sensitivity analyses carried out in the context of ramp-stress ALTSP based on variable SSP for proportion nonconforming.