• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.167-170
• /
• 2008

A TBCC(Turbine Based Combined Cycle) engine performance design method for reusable launch vehicles flying both in subsonic and supersonic regime was proposed. The TBCC consists of turbo jet engines and ramjet engines, operating individually or together according to operation schedule. The performance scheme of turbojet and ramjet was validated and the combined engine performance of the TBCC at a typical flight condition was analyzed.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.371-374
• /
• 2011

High-resolution numerical study is carried out to investigate the flame stability of the turbulent supersonic combustion in a Dual-Combustion Ramjet (DCR). The auto-ignition in a shear layer between hydrogen/carbon-monoxide syngas and air was studied at elevated enthalpy condition. Comparison of a constant area combustor and a combustor with a small divergence angle shows that the supersonic combustion has a characteristics of the lifted flame and its stability is influenced significantly by the compressibility.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.326-330
• /
• 2011

Development and validation of performance analysis model for dual combustion ramjet engines has been performed. A typical performance model for hypersonic intake flow and supersonic mixing and combustion was demonstrated; Taylor-Maccoll equation for coaxial intakes and a quasi-one dimensional reacting flow analysis with CEA chemical equilibrium for supersonic combustion. The results, thermodynamic data of intake and supersonic combustor were validated with CFD numerical results.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.4
• /
• pp.52-60
• /
• 2015

Operation area of corps was expanded under military reformation, and extending range of 155 mm howitzer became important issue. New approach is needed to extend range to 80 kim. Ramjet engine is air breathing engine, and it can provide specific impulse several times more than solid rocket motor so that range is extended using same weight of propellant. If the ramjet engine is gun-launched system, it does not require any other booster because muzzle velocity is near Mach 3. Especially solid fuel ramjet (SFRJ) does not have any moving part so that it is favorable for gun-launching system which is under high stress during launching. In this paper, we design air intake, combustion chamber, and nozzle of 155 mm gun launched ramjet propelled artillery shell with inviscid flow assumption. We conduct parameter study to have range more than 80 km, and maximum high explosive volume.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.175.1-175.1
• /
• 2005

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2002.04a
• /
• pp.62-63
• /
• 2002

램젯 엔진을 장착한 미사일은 기존의 터보젯 이나 터보팬 엔진에 비해 압축기와 터빈과 같은 엔진 구성품이 없어 무게가 가볍고 초음속에서 저항도 적으며 고속의 비행영역에서 연료효율과 생존성능이 뛰어나기 때문에 차세대 미사일 추진 시스템으로서 세계 여러 국가에서 개발 및 운용이 이루어지고 있다. 하지만 램젯 엔진은 충분한 램 효과를 얻어야 초기 점화가 가능하기 때문에 현재 개발되고 있는 대부분의 시스템은 최초 발사시 로켓 부스터에 의해 가속하고 로켓연료를 모두 소모하고난 후에 흡입구가 개방되어 램젯 엔진이 점화하는 방식을 취하고 있다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2002.04a
• /
• pp.60-60
• /
• 2002

비행탄의 종말속도증대를 위하여 고체램제트를 이용하는 개념은 현재 세계적으로 여러나라에서 연구 중에 있다. Solid Fuel Ramjet Propulsion(고체연료 렘제트 추진)은 로켓추진에 비하여 월등히 높은 비추력을 가지며 구조적으로 매우 간단하여 탄의 사거리 및 평균속도를 증대시키는 좋은 수단으로 사용되고 있다. 그러나 간단한 구조에도 불구하고 고체렘제트의 작동은 매우 다양한 물리적 현상이 연관되므로 필요한 성능을 얻기 위해서는 이들의 상호 작용을 고려하여 설계의 최적화 및 성능 예측이 필요하다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1995.11a
• /
• pp.3-8
• /
• 1995

An experimental investigation was conducted in order to figure out the multiple fire effects on the combustion efficiency and fuel properties of the solid fuel ramjet. Pure HTPB and metallized $B_4$C/HTPB fuel were studied. Fuel property effects were analyzed by using differential scanning calorimetry, The thermal or mechanical properties of the fuel grain were not affected and the combustion efficiency was a little increased.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.476-479
• /
• 2008

The combustion efficiency of the solid fuel ramjet is affected by the inlet air temperature. And this inlet air temperature is dependent on the flight Mach number and the environment air temperature. If the flight altitude is changeable, the inlet air temperature and the air density also vary. The performance efficiency is investigated with this variables related to the combustion efficiency.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.455-456
• /
• 2008

A numerical study was conducted on the effect of flame holder which could be added to the inlet duct of Integral Rocket-Ramjet. Two different types of flame holder installations, flame holder without sudden expansion region and flame holder with small sudden expansion region, were compared and showed different flame shapes and pressure rise in the combustor.