• 폴리머
• /
• 제34권5호
• /
• pp.469-473
• /
• 2010

광경화성 수지인 아크릴레이트의 경화 특성과 메카니즘에 대하여 Photo-DSC와 FTIR, Raman spectrometer를 이용하여 조사하였다. 아크릴레이트 종류, 관능기 수, 광 세기 등에 따른 경화 속도에 관한 정보는 시간에 따른 Photo-DSC curve에서 계산하였고, FTIR과 Raman을 이용하여 경화 반응의 전환율과 반응 메카니즘을 조사하였다. 광경화 반응에서 산소의 영향을 알아보기 위하여 아크릴레이트 수지와 thiol-ene 수지의 경화과정을 비교하였는데, 공기 중 산소가 아크릴레이트의 라디칼 반응에서 금지제로 작용하여 아크릴레이트 수지는 80% 이하의 전환율을 보인 반면 thiol-ene 수지는 산소가 반응에 영향을 미치지 않는 것을 알 수 있었다.

• 세라미스트
• /
• 제22권3호
• /
• pp.281-300
• /
• 2019

Surface enhanced Raman scattering (SERS) was first discovered in 1974 by an unexpected Raman signal increase from Pyridine adsorbed on rough Ag electrode surfaces by the M. Fleishmann group. M. Moskovits group suggested that this phenomenon could be caused by surface plasmon resonance (SPR), which is a collective oscillation of free electrons at the surface of metal nanostructures by an external light source. After about 40 years, the SERS study has attracted great attention as a biomolecule analysis technology, and more than 2500 new papers and 500 review papers related to SERS topic have been published each year in recently. The advantages of biomaterials analysis using SERS are as follows; ① Molecular level analysis is possible based on unique fingerprint information of biomolecule, ② There is no photo-bleaching effect of the Raman reporters, allowing long-term monitoring of biomaterials compared to fluorescence microscopy, ③ SERS peak bandwidth is approximately 10 to 100 times narrower than fluorescence emission from organic phosphor or quantum dot, resulting in higher analysis accuracy, ④ Single excitation wavelength allows analysis of various biomaterials, ⑤ By utilizing near-infrared (NIR) SERS-activated nanostructures and NIR excitation lasers, auto-fluorescence noise in the visible wavelength range can be avoided from in vivo experiment and light damage in living cells can be minimized compared to visible lasers, ⑥ The weak Raman signal of the water molecule makes it easy to analyze biomaterials in aqueous solutions. For this reason, SERS is attracting attention as a next-generation non-invasive medical diagnostic device as well as substance analysis. In this review, the principles of SERS and various biomaterial analysis principles using SERS analysis will be introduced through recent research papers.

• Bulletin of the Korean Chemical Society
• /
• 제23권8호
• /
• pp.1078-1084
• /
• 2002

The formation temperature for the perovskite lead zirconate titanate [Pb(Zr,Ti)O3, PZT] derived from sol-gel route was lowered by more than $100^{\circ}C$ with the addition of crystallographically suitable seed particles, such as barium titanat e (BT) or PZT. We investigated the effect of seeding on the crystallization of perovskite phase and in the microstructure of the sol-gel derived PZT powder by varying the concentration, size and chemical species of seed particles. The phase transition as a function of temperature was monitored by DTA, XRD, and Raman spectroscopy, and the interface between the seed particle and grown PZT layer was analyzed by SEM and high resolution TEM techniques. It was found that both the heterogeneous and homogeneous nucleation contributes competitively in the formation of perovskite PZT grains.

• Bulletin of the Korean Chemical Society
• /
• 제11권5호
• /
• pp.460-463
• /
• 1990

The normal and fluorinated high-Tc superconducting materials, $YBa_2Cu_3O_{7-x}F_y$with $0.25{\leq}x{\leq}0.55\;and\;0.00{\leq}y{\leq}0.30$, were synthesized to investigate the dopping effect of fluorine atom on the superconductivity of Y123 and studied by X-ray diffraction analysis and electron probe microanalysis, resistivity and thermopower measurements, and polarized micro-Raman spectroscopy. The reproducible micro-Raman spectra were recorded and analyzed. The coherent assignments could be suggested for the spectra of normal and fluorinated samples. The fluorine atoms introduced were found to be substituted for oxygen in pyramidal Cu-O units rather than in Cu-O chains. The unit cell parameters were decreased upon the substitution of oxygen by fluorine atom. From the decreasing cell parameters and Tc, the increasing thermopower, and the possible assignments of the vibrational modes, it could be suggested that the dopping of fluorine atom localizes the superconducting electrons in Y123.

• Bulletin of the Korean Chemical Society
• /
• 제21권12호
• /
• pp.1181-1186
• /
• 2000

The structural evolution during the thermal treatment of $70SiO_2-3OTiO_2(mole%)$ sol-gel derived powders and films was investigated by FT-IR, Raman and XPS, and XRD. From these results, the $TiO_2-rich$ regions involving $Ti^{4+}$ ions in octahedral coordination were confirmed to be amorphous at $600^{\circ}C$. However, Raman spectra along with XRD patterns indicated that at high temperature (above $700^{\circ}C)$, the amorphous $TiO_2was$ segregating to form anatase crystal. Also, the effect of experimental variables such as thermal treatment, heating rate and exposure to water vapor on structural changes, refractive index and thickness of the film coated on sodalime-silicate glass were investigated.

• Journal of Ceramic Processing Research
• /
• 제13권spc1호
• /
• pp.42-46
• /
• 2012

The effect of the parameters for few-layered graphene growth by thermal CVD on nickel substrate was investigated. Graphene can be synthesized by using different strategies. Chemical vapor deposition (CVD) has known as one of the most attractive methods to produce graphene due to its good film uniformity, compatibility and large scale production. The control of parameters such as temperature, growth time and pressure in CVD process has been widely recognized as the most important process in graphene growth. Different carbon precursors, methane and acetylene, were introduced in the quartz tube with a variety of growth conditions. Raman spectroscopy was used to confirm the presence of a few- or multi-layered graphene.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2000년도 추계총회,초청강연,특별강연,연구발표회
• /
• pp.184.2-184
• /
• 2000

• 대한소아치과학회지
• /
• 제30권3호
• /
• pp.423-430
• /
• 2003

최근 들어 심미적 목적으로 치아 미백제를 이용한 치아 미백술이 널리 사용되고 있다. 현재까지 치아 미백제의 정확한 기전은 밝혀져 있지 않지만 미백제로부터 여러 가지 방법으로 분해된 free radical의 복잡한 산화작용에 의한 것으로, 치아변색의 원인물질의 화학적 구조가 바뀌어짐으로써 희게 되는 것으로 이해하고 있다. 본 연구의 목적은 치아 미백제에 의한 상아질의 특성변화를 관찰하고 미백제의 안전성을 평가하고자 하였다. 이를 위해 10% carbamide peroxide를 1일에 6시간 2주동안 사람의 소구치 법랑질에 적용한 후 상아질에서 나타나는 형상변화, 경도변화, 조성변화 및 무기질 함량변화를 주사전자현미경(SEM), 미세경도기, FT-Raman 분광기 그리고 전자탐침미세분석기(EPMA)를 이용하여 분석하고 다음과 같은 결과를 얻었다. 법랑질 표면에 도포한 10% carbamide peroxide가 상아질로 침투하여 미친 영향은 증류수에만 담가둔 시료와 비교하였을 때 형상변화의 측면에서는 차이를 발견할 수 없었다. Peritubular dentin과 intertubular dentin의 표면에서는 nanometer range에서 아무런 변화를 발견할 수 없었다. 미백처리한 치아와 증류수에만 담가둔 치아의 상아질에서 통계적으로 유의한 경도의 차이를 발견할 수 없었다. FT-Raman 분석결과 상아질 구성성분 중 어떤 변화도 분광학적으로 관찰되지 않았다. 유기질에 의한 peak와 무기질에 의한 peak 모두 무시 할 수 있을 정도의 Raman intensity 변화만 관찰되었다. 무기질 함량변화를 측정한 결과 아무런 처리도 하지 않은 치아의 상아질, 증류수에만 담가둔 치아의 상아질 그리고 미백후 증류수에 담가둔 치아의 상아질에서 무기질 총량이 각각 $98.73{\pm}1.89,\;98.56{\pm}2.11,\;97.47{\pm}2.51$로 나타났다. 이들 값은 통계학적으로 유의한 차이를 보이지 않았다. 이상의 결과들로 볼 때 10% carbamide peroxide 미백이 상아질에 미치는 영향은 극히 미약하다고 판단되어 상아질에는 안전한 것으로 생각된다.

• The Korean Journal of Ceramics
• /
• 제6권1호
• /
• pp.21-26
• /
• 2000

Nanosized powders of trimetallic orthoferrites containing La and Sm in different ratios were synthesised by the thermal decomposition at low temperatures of the corresponding hexacyanocomplexes. The precursors and their decomposition products were analyzed by simultaneous thermogravimetric and differential thermal analysis (TG/DTA), x-ray diffraction (XRD) and Raman spectroscopy. Single phase trimetallic precursors and oxides were obtained. The crystal structure of the perovskitic oxides was orthorhombic, and the lattice parameters were affected by the ionic size of the rare earth elements present in the oxides. Raman spectroscopy showed a disorder effect in the vibrational bands with increasing the La content.

• 한국결정성장학회지
• /
• 제29권6호
• /
• pp.379-382
• /
• 2019

금 나노 입자의 합성은 폴리바이닐피롤리던(PVP)의 계면 활성제로 아스코르브 산(AC)에 의한 골드 솔트의 환원을 통해 수용액 환경을 만들었다. pH 제어에 의해 4 내지 20 nm의 크기 범위를 갖는 고분 산성 금 입자를 고수율로 제조하였다. 합성된 금 나노 입자의 구조적 및 광학적 특성은 투과 전자 현미경(TEM) 및 UV-vis 분광법에 의해 특성화되었다. 제조된 나노 입자는 효율적인 표면 강화 라만 산란(SERS) 특성을 나타내었고, 이들의 SERS 활성은 크기에 의존한다.