• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.1
• /
• pp.113-118
• /
• 2010

A straight pipe is used after complicated bending work in a mechanical system. In this work process, the plastic deformation of the pipe produces residual stress in the pipe. This residual stress significantly affects the behavior of pipe fracture. For this reason, residual stress must be evaluated. Measuring the residual stress of a U-shaped pipe is difficult with existing destructive and nondestructive measurement methods. In this paper, the residual stress of a U-shaped aluminum pipe (99.7% pure aluminum) was evaluated from the Raman shift by Raman spectroscopy and FEM(Finite Element Method, FEM) analysis. The results of the stiffness test by FEM analysis are compared with those by experiments. The analyzed results of the Raman spectra showed a similar tendency with the results of the FEM analysis with respect to the residual stress distributions in U-shaped pipes. Also, the results of the bending tests showed resemblance to each other.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.5
• /
• pp.612-620
• /
• 2015

Short-range detection of chemical agents deposited on ground surface using a standoff Raman system employing a pulsed laser at 248 nm is described. Mounted in a vehicle such as an NBC reconnaissance vehicle, the system is protected against toxic chemicals. As most chemicals including chemical warfare agents have unique Raman spectra, the spectra can be used for detecting toxic chemicals contaminated on the ground. This article describes the design of the Raman spectroscopic system and its performance on several chemicals contaminated on asphalt, concrete, sand, etc.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.4
• /
• pp.283-289
• /
• 2014

This study was conducted to develop a non-destructive detection method for adulterated powder products using Raman spectroscopy and partial least squares regression(PLSR). Garlic and ginger powder, which are used as natural seasoning and in health supplement foods, were selected for this experiment. Samples were adulterated with corn starch in concentrations of 5-35%. PLSR models for adulterated garlic and ginger powders were developed and their performances evaluated using cross validation. The $R^2_c$ and SEC of an optimal PLSR model were 0.99 and 2.16 for the garlic powder samples, and 0.99 and 0.84 for the ginger samples, respectively. The variable importance in projection (VIP) score is a useful and simple tool for the evaluation of the importance of each variable in a PLSR model. After the VIP scores were taken pre-selection, the Raman spectrum data was reduced by one third. New PLSR models, based on a reduced number of wavelengths selected by the VIP scores technique, gave good predictions for the adulterated garlic and ginger powder samples.

• Journal of the Korean institute of surface engineering
• /
• v.57 no.2
• /
• pp.71-85
• /
• 2024

This article provides an overview of Raman spectroscopy and its practical applications for surface analysis of semiconductor processes including real-time monitoring. Raman spectroscopy is a technique that uses the inelastic scattering of light to provide information on molecular structure and vibrations. Since its inception in 1928, Raman spectroscopy has undergone continuous development, and with the advent of SERS(Surface Enhanced Raman Spectroscopy), TERS(Tip Enhanced Raman Spectroscopy), and confocal Raman spectroscopy, it has proven to be highly advantageous in nano-scale analysis due to its high resolution, high sensitivity, and non-destructive nature. In the field of semiconductor processing, Raman spectroscopy is particularly useful for substrate stress and interface characterization, quality analysis of thin films, elucidation of etching process mechanisms, and detection of residues.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1998.02a
• /
• pp.121-122
• /
• 1998

Raman 분광학을 이용하여 질화된 GaAs 박막의 특성을 조사 하였다. GaAs 질화 과 정은 상온에서부터 $600^{\circ}C$까지의 여러 가지 온도에서 ECR질소 플라즈마를 조사함으로써 시 료를 준비하였다. Raman 측정의 결과 온도가 증가함에 따라 세로 광학(LO) 포논 및 가로 광학 (TO) 포논모드의 진동수는 낮은 진동수로 이동하였고 또한 LO-TO 분리 크기 역시 감소하였다. 진동수의 이동의 근원을 격자상수의 변화에 따른 변형 및 유효전하의 감소등으 로 설명하였다. LO 포논 모드의 밴드 폭의 넓어어지는 $600^{\circ}C$에서 가장 컸으며 이는 고온에 서 표면의 무질서 구조가 가장 많이 일어났음을 뜻한다. 이와 같은 원인으로 질화된 GaAs 박막의 몇 가지 물리적 변수인 결함의 비율, 변형의 크기 및 상관 길이 등을 계산하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.223-225
• /
• 2008

하이드레이트는 저온.고압에서 저분자량의 게스트(guest)가 호스트(host)인 물분자 속에 포획되어 만들어지는데 일련의 과정은 물리적 반응을 통해 생성된다.본 연구에서는$CO_2$보다 지구온난화지수(Global Warming Potential)가 23,900배 높은 $SF_6$의 회수 및 정제기술로써 하이드레이트화를 이용하는 신기술 개발의 일환으로 분광학적 접근을 통해 $SF_6$ 혼합 하이드레이트의 정성 및 정량분석을 수행하였다. Raman Shift 분석 결과 $SF_6$의 $770cm^{-1}$에서 $v_1$ 진동주파수를 확인함으로써 하이드레이트 내 $SF_6$가 안정적으로 포집됨을 확인하였고 혼합가스 내 $SF_6$ 농도별로 만들어진 샘플의 Raman Shift를 통해서 $SF_6$의 하이드레이트 전환율을 가늠할 수 있었다.

• Analytical Science and Technology
• /
• v.24 no.6
• /
• pp.519-526
• /
• 2011

Chemometrics using near-infrared (NIR) and Raman spectroscopy have found significant uses in a variety quantitative and qualitative analyses of pharmaceutical products in complex matrixes. Most of the pharmaceutical can be measured directly with little or no sample preparation using these spectroscopic methods. During pharmaceutical manufacturing process, analytical techniques with no or less sample preparation are very critical to confirm the quality. This study showed NIR and Raman spectroscopy with principal component analysis (PCA) was very effective for the blending processing control. It is of utmost importance to evaluate critical parameters related to quality of products during pharmaceutical processing. The blending is confirmed by off-line determination of active pharmaceutical ingredient (API) by a conventional method such as high performance liquid chromatography (HPLC) and UV spectroscopy. These analytical methods are time-consuming and ineffective for real time control. This study showed the possibility for the determination of blend uniformity end-point of CR tablets with the use of both NIR and Raman spectroscopy. The samples were acquired from six positions during blending processing with U-type blender from 0 to 30 min. Using both collected NIR and Raman spectral data, principal component analysis (PCA) was used to follow the uniformity of blending and finally determine the end-point. The variation of homogeneity of six samples during blending was clearly found and blend uniformity end-point was successfully confirmed in the domains of principal component (PC) scores.

• Microbiology and Biotechnology Letters
• /
• v.43 no.3
• /
• pp.177-186
• /
• 2015

With a view to supporting the provisions of the current Korean food code for the detection of Benzo[a]pyrene, various analytical methods of detection in foods were evaluated and established in terms of linearity, limits of detection/quantitation, efficiency, and accuracy, amongst others. It was observed that to improve the technologies involved in the application of these methods, complicated and combined preparation processes of foods, including extraction, separation and purification, have been the main focus of efforts at optimization. Recently, on-site quick reaction for the detection of hazardous substances in the environment and food materials aims at developing simplified examination processes, such as lable-free and non-invasive technological analysis, to reduce the costs and time involved in the examination. Herein, current benzo[a]pyrene detection methods are reviewed in addition to new Raman spectroscopy-based trials established to pursue improve the speed, simplicity and suitability of testing.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.250-251
• /
• 2002

혈당의 비침습적인 측정의 필요성은 잦은 채혈로 인한 감염의 우려, 필요할 때마다 채혈의 고통 없이 혈당을 측정할 수 있다는 장점 때문에 지난 20여 년 동안 활발히 연구되어 왔다. 근적외선 및 원적외선 흡수분광법, 라만분광법, Polarization rotation 또는 Stimulated Raman 측정법, 온도측정법, 통계적 분석법, 전처리연구 등 많은 분야에서 접근하고 있지만 아직까지는 in vivo 측정에 성공하고 있지 못하고 있다 [1]. (중략)

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.222-223
• /
• 2002

3차 비선형 광학현상을 이용한 레이저 분광학은 코헤런트 반스톡스 라만산란(Coherent Anti-Stokes Raman Scattering, CARS)이나 축퇴 사광자혼합(Degenerate Four-Wave Mixing, DFWM)이 기계공학의 연소진단이나 화학분야에 응용된 이래 활발히 연구되어져왔다.[1] 비선형 광학현상의 특성상, 발생한 신호는 입사 레이저광들과의 위상정합조건이 만족되는 특정한 방향으로만 진행하고 레이저광처럼 가간섭성을 갖는다. (중략)