• 열처리공학회지
• /
• 제34권4호
• /
• pp.185-190
• /
• 2021

The extrusion experiments using the 7075 aluminum billet have been performed to investigate the effects of die cooling and ram speed on the occurrence of surface defects on the extrudate. The purpose of die cooling was to suppress overheating of the extrudate at the moment of extrusion. In the present die cooling system, liquid nitrogen has been injected in to the die and sprayed to the surface of extrudate. Ram speed was either kept or varied in the range of 1.1~1.7 mm/sec. throughout one extrusion shot to check the occurrence of surface defects. Every extrusion started at a ram speed of 1.25 mm/sec. The temperature of extrudate was measured using a laser thermometer. The 7075 billet of 180 mm in diameter and 550 mm in length was preheated at 390℃ and extruded to get a single plate of 8000 mm in length, 150 mm in width and 10 mm in thickness. Each extrudate was checked by eye to find the surface defects. The microstructures were obtained in the specimen cut from each corner of the extrudate using the EBSD micrographs.

• 한국컴퓨터산업교육학회:학술대회논문집
• /
• 한국컴퓨터산업교육학회 2003년도 제4회 종합학술대회 논문집
• /
• pp.75-78
• /
• 2003

An ideal semiconductor memory technology would combine or unify the attractive features of these technologies without acquiring any of the unattractive features. Such a memory technology, Phase Change RAM is now being developed using the class of elements known as chalcogenides. It is expected that this technology will eventually allow chips that have SRAM speed, DRAM cost, and Flash power characteristics and non-volatility.

• 한국재료학회지
• /
• 제21권1호
• /
• pp.39-45
• /
• 2011

In this study, the heat flow of the plant scale aluminum extrusion process was investigated to establish optimum continuous heat treatment conditions. During the extrusion of 6061 aluminum alloy, processing parameters such as the extrusion pressure, speed and temperature histories of billets were logged as a function of time. The surface temperature of the billets increased at constant ram speed, while it decreased with decreases of the ram speed. In order to maintain the billet temperature within a solutionizing temperature range prior to the succeeding water quenching step, the ram speed or the temperature of the blower should be controlled. The temperature histories of the billets during the extrusion and hot air blowing processes were successfully simulated by using the velocity boundary model in ANSYS CFX. The methodology to design an optimum process by using a commercial simulation program is described in this study on the basis of the metallurgical validation results of the microstructural observation of the extrudates. The developed model allowed the advantages of taking into account the motion of the extrudate coupled with the temperature change based on empirical data. Calculations were made for the extrudate passing through the isothermal chamber maintained at appropriate temperature. It was confirmed that the continuous heat treatment system is beneficial to the productivity enhancement of the commercial aluminum extrusion industry.

• 한국환경과학회지
• /
• 제27권3호
• /
• pp.203-217
• /
• 2018

For this study, WRF numerical modeling was performed, using RDAPS information for input data on typhoons affecting the Korean peninsula to produce wind data of 700hPa. RAM numerical modeling was also used to calculate 3-second gusts as the extreme wind speed. After comparing wind speeds at an altitude of 10 m to evaluate the feasibility of WRF numerical modeling, modeled values were found to be similar with measured ones, reflecting change tendencies well. Therefore, the WRF numerical modeling results were verified. As a result of comparing and analyzing these wind speeds, as calculated through RAM numerical modeling, to evaluate applicability for disaster preparedness, change tendencies were observed to be similar between modeled and measured values. In particular, modeled values were slightly higher than measured ones, indicating applicability for the prevention of possible damage due to gales. Our analysis of 3-second gusts during the study period showed a high distribution of 3-second gusts in the southeast region of the Korean peninsula from 2002-2006. The frequency of 3-second gusts increased in the central north region of Korea as time progressed. Our analysis on the characteristics of 3-second gusts during years characterized by El $Ni{\tilde{n}}o$ or La Nina showed greater strength during hurricanes that affected the Korean peninsula in El $Ni{\tilde{n}}o$ years.

• 열처리공학회지
• /
• 제35권6호
• /
• pp.319-326
• /
• 2022

Direct extrusions of an aluminum 7075 alloy were carried out using 1500 ton machine with and without die cooling system. Cooling of extrusion die has been performed by the flow of liquid nitrogen and controlled by laser thermometer. Billet was 180 mm in diameter and 500 mm in length. The preheating temperatures of billet, container and die were 390℃, 400℃ and 450℃, respectively. Ram speed was kept with 1.25 mm/sec first. The change of ram speed was carried out during extrusion according to the observation of surface defects such as crack or tearing. Extrudates of 8.3 m in length, 100 mm in width and 15 mm in thickness were obtained to observe and analyze surface defects by optical microscopy and EBSD (Electron BackScattered Diffraction). In case of extrusion without die cooling cracks on the surface and tearing in the corner of extrudate occurred in the middle stage and developed in size and frequency during the late stage of extrusion. At the extrusion with die cooling the occurrence of defects could be suppressed on the most part of extrudate. EBSD micrographs showed that cracks and tearings have been resulted from the same origin. Surface defects were generated at the boundaries of grains formed by secondary recrystallization due to surface overheating during extrusion.

• 정보과학회 논문지
• /
• 제44권6호
• /
• pp.601-606
• /
• 2017

최근 드론 산업의 발전으로 일상생활 중에서도 드론을 비행하는 모습을 자주 관찰할 수 있다. 이러한 드론에 주로 사용되는 리튬폴리머 배터리는 사용 시간이 흐름에 따라 배터리의 전압 강하가 일어나 동일한 드론 조종 신호에도 드론 모터의 속도가 불안정해지는 문제점이 발생한다. 드론 모터 속도의 불안정은 고도 유지를 불가능하게 하여 드론 기체가 상승과 하강을 반복하게 된다. 이러한 문제를 해결하기 위해서 기존의 방법은 배터리 방전에 따른 보상기를 추가하거나 시스템 제어 모델을 변경하였다. 하지만 이러한 기법은 하드웨어로 구현된 모듈을 사용하거나 모터 종류 및 실험 결과에 종속적으로 구현되기 때문에 드론 기체에 사용되는 모터에 맞게 새로운 모듈이 구현되어야하는 문제점이 있다. 따라서 본 논문에서는 이러한 문제를 해결하기 위해 드론의 펌웨어에 배터리 전압 강하를 고려하는 모터 속도 제어기를 구현하여 드론의 비행 안정성을 확보한다.

• Composites Research
• /
• 제33권4호
• /
• pp.205-212
• /
• 2020

본 연구에서는 기상화학반응공정을 이용하여 실리콘카바이드가 코팅된 2종형상의 탄소/탄소복합재 위에 진공플라즈마용사를이용하여 하프늄카바이드를 코팅하였다. 코팅 전/후 시편을 5.06 MW/㎡의 열유속에서 120초 동안 산화 및 삭마 실험을 진행하였다. 시험 전/후의 질량 변화량을 통해 질량삭마율을 계산하였고 캘리퍼스와 고속카메라를 이용하여 길이변화를 측정하여 길이삭마량을 계산하였다. 시편 단면의 FE-SEM 및 EDS 분석을 통해 산화 및 삭마거동을 관찰하였다. 플라즈마 풍동 시험결과 코팅된 시편이 무게감소 및 길이변화가 적어 내산화 및 내삭마성이 높은 것으로 판단되었다. 그러나 동일조건에서 시험한 반구형과 원통형의 산화 및 삭마정도는 상이하였고 원통형에서 더 높은 내산화 및 내삭마성을 가지는 것으로 평가되었다.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제6권10호
• /
• pp.473-478
• /
• 2017

드론은 비행 목적을 달성하기 위해 고도 유지를 필요로 하는 경우가 많다. 일반적으로 드론의 고도 유지 기능은 현재 측정되는 고도 정보에 따라 드론을 상승시키거나 하강시키는 작업을 반복하는 것을 의미한다. 고도 유지 중에 모터 속도 차이로 인한 추력의 불균형이나 바람 등의 외적 요인으로 인해 드론의 고도가 계속 변한다. 그럼에도 불구하고 고도를 유지하기 위해서는 기본적으로 계속해서 변하는 드론의 고도를 정확하게 측정해야 한다. 드론의 고도 측정 방법은 일반적으로 가속도센서를 사용한다. 이 방법은 적분 오차 누적으로 인한 측정값이 발산하는 문제와 드론의 기체 진동조차 고도 변화로 인지하는 문제가 존재한다. 그래서 상용 드론이나 기존 연구에서는 가속도센서를 제외한 별도의 센서를 추가하여 고도 측정에 사용한다. 그러나 추가하는 센서 대부분은 측정거리에 제한이 있으며 여러 센서들을 같이 사용하는 경우 센서 값들의 연산 처리가 많아져 고도 측정 속도가 지연될 우려가 있다. 따라서 드론의 고도 유지, 고도 측정 성능에 영향을 주지 않으면서 정확한 고도를 측정할 수 있는 방안이 필요하다. 본 논문에서는 가속도센서를 이용하는 일반적인 고도 측정 방법을 개선한 측정 알고리즘을 제안하고 본 알고리즘을 적용한 결과로 고도 유지와 고도 측정의 정확성이 향상됨을 보인다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.410-410
• /
• 2013

Next-generation nonvolatile memory (NVM) has attracted increasing attention about emerging NVMs such as ferroelectric random access memory, phase-change random access memory, magnetic random access memory and resistance random access memory (RRAM). Previous studies have demonstrated that RRAM is promising because of its excellent properties, including simple structure, high speed and high density integration. Many research groups have reported a lot of metal oxides as resistive materials like TiO2, NiO, SrTiO3 and ZnO [1]. Among them, the ZnO-based film is one of the most promising materials for RRAM because of its good switching characteristics, reliability and high transparency [2]. However, in many studies about ZnO-based RRAMs, there was a problem to get lower current level for reducing the operating power dissipation and improving the device reliability such an endurance and an retention time of memory devices. Thus in this paper, we investigated that highly reproducible bipolar resistive switching characteristics of W doped ZnO RRAM device and it showed low resistive switching current level and large ON/OFF ratio. This may be caused by the interdiffusion of the W atoms in the ZnO film, whch serves as dopants, and leakage current would rise resulting in the lowering of current level [3]. In this work, a ZnO film and W doped ZnO film were fabricated on a Si substrate using RF magnetron sputtering from ZnO and W targets at room temperature with Ar gas ambient, and compared their current levels. Compared with the conventional ZnO-based RRAM, the W doped ZnO ReRAM device shows the reduction of reset current from ~$10^{-6}$ A to ~$10^{-9}$ A and large ON/OFF ratio of ~$10^3$ along with self-rectifying characteristic as shown in Fig. 1. In addition, we observed good endurance of $10^3$ times and retention time of $10^4$ s in the W doped ZnO ReRAM device. With this advantageous characteristics, W doped ZnO thin film device is a promising candidates for CMOS compatible and high-density RRAM devices.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1998년도 추계학술대회
• /
• pp.285-286
• /
• 1998

Virtual Brain-endoscopy is an effective method to detect lesion in brain. Brain is the most part of the human and is not easy part to operate so that reconstructing in 3D may be very helpful to doctors. In this paper, it is suggested that to increase the reliability, method of matching 3D object with the 2D CT slice. 3D Brain-endoscopy is reconstructed with 35 slices of 2D CT images. There is a plate in 3D brain-endoscopy so as to drag upward or downward to match the relevant 2D CT image. Relevant CT image guides the user to recognize the exact part he or she is investigating. VRML Script is used to make the change in images and PlaneSensor node is used to transmit the y coordinate value with the CT image. The result is test on the PC which has the following spec. 400MHz Clock-speed, 512MB ram, and FireGL 3000 3D accelerator is set up. The VRML file size is 3.83MB. There was no delay in controlling the 3D world and no collision in changing the CT images. This brain-endoscopy can be also put to practical use on medical education through internet.