• Journal of the Society of Naval Architects of Korea
• /
• v.52 no.3
• /
• pp.222-235
• /
• 2015

The purpose of this study is to suggest guidelines for riser fatigue analysis in terms of selection of reasonable analysis method. Three analysis methods (spectral, regular wave, rain-flow counting) are introduced and compared. As the riser systems give non-linear response, the time-domain analysis method is more preferred than frequency-domain analysis method. The spectral fatigue analysis method, however, is still useful for identifying fatigue prone areas. Once stress RAO is established, fatigue damage can be calculated very quickly. The regular wave method and the rain-flow counting method are more time consuming but give more exact results compare to spectral method. In case of regular wave method, a set of regular waves which represent random sea states is considered for dynamic analysis. The rain-flow counting method is the most intuitive and exact method because it refers time history stresses containing most of non-linear effects of the riser system. However, it is not common for early design stage to use rain-flow counting method because of its high cost. In this study, it was confirmed that the regular wave method is the most cost effective way in specific cases. However, if the system is highly non-linear, it seems that the regular wave method gives less accurate results than rain-flow counting method. Therefore, it is imperative that the engineers select appropriate analysis method based on design stage and given engineering period. This paper also discusses the theoretical background of each calculation method and hydrodynamic aspects of marine riser systems. A steel catenary riser (SCR) line on FPSO was considered and marine dynamic program (OrcaFlex) was used for static and dynamic analysis.

• Journal of Ocean Engineering and Technology
• /
• v.35 no.4
• /
• pp.257-265
• /
• 2021

Many studies have been performed to predict a reliable and accurate stress-range distribution and fatigue damage regarding the Gaussian wide-band stress response due to multi-peak waves and multiple dynamic loads. So far, most of the approximation models provide slightly inaccurate results in comparison with the rain-flow counting method as an exact solution. A step-by-step study was carried out to develop new approximate spectral moments that are close to the rain-flow counting moment, which can be used for the development of a fatigue damage model. Using the special parameters and bandwidth parameters, four kinds of parameter-based combinations were constructed and estimated using the R-squared values from regression analysis. Based on the results, four candidate empirical formulas were determined and compared with the rain-flow counting moment, probability density function, and root mean square (RMS) value for relative distance. The new approximate spectral moments were finally decided through comparison studies of eight response spectra. The new spectral moments presented in this study could play an important role in improving the accuracy of fatigue damage model development. The present study shows that the new approximate moment is a very important variable for the enhancement of Gaussian wide-band fatigue damage assessment.

• Structural Engineering and Mechanics
• /
• v.48 no.4
• /
• pp.435-453
• /
• 2013

A new computational approach for the rain load on the transmission tower is presented to obtain the responses of system subjected to the wind and rain combined excitations. First of all, according to the similarity theory, the aeroelastic modeling of high-voltage transmission tower is introduced and two kinds of typical aeroelastic models of transmission towers are manufactured for the wind tunnel tests, which are the antelope horn tower and pole tower. And then, a formula for the pressure time history of rain loads on the tower structure is put forward. The dynamic response analyses and experiments for the two kinds of models are carried out under the wind-induced and wind-rain-induced actions with the uniform and turbulent flow. It has been shown that the results of wind-rain-induced responses are bigger than those of only wind-induced responses and the rain load influence on the transmission tower can't be neglected during the strong rainstorm. The results calculated by the proposed method have a good agreement with those by the wind tunnel test. In addition, the wind-rain-induced responses along and across the wind direction are in the same order of response magnitude of towers.

• Journal of the Korean Society for Railway
• /
• v.13 no.6
• /
• pp.577-582
• /
• 2010

The importance of maintenance of rail surface defects is increasing according to the KTX operation. That is because during high speed operation of rolling stocks, rail surface defects shorten fatigue life of rail, accelerate track degradation and deteriorate ride comfort. Rail grinding has been applied for effective rail maintenance in Kyeong-Bu HS line. This paper evaluates the effectiveness of rail grinding in term of rail fatigue life. To this end, the stresses of the rail are measured under KTX running and the equivalent stress range is calculated by RMC after the frequency analysis done with rainflow counting method. Also, The Modified Miner's rule is applied to predict the fatigue life of ground rail. The result of the analysis shows that the fatigue life of ground rail is increased by 15%.

• 한국전산유체공학회:학술대회논문집
• /
• 2010.05a
• /
• pp.242-246
• /
• 2010

To determine the trajectories and the impact of rain drops on the facade of a tall building, a particle tracking method is employed form steady state simulation of turbulent flow around the building. The simulation is performed for the upper part of the building comprising a detailed louver system. Rain is trapped at relative high rates on the roof and the penthouse, with Local Intensity Factors (LIF's) of the order of 1. The upper parapets and upper floors get a fair amount of wetting with LIF's of the order of 0.6. The wetting decreases downwards reaching values of 0.2 to 0.25 at the level of the louver system.

• Journal of Korean Society for Quality Management
• /
• v.42 no.3
• /
• pp.325-338
• /
• 2014

Purpose: The purpose of this study was to explain de-painting phenomenon of KUH-1 tail blade and to propose useful solution of it by test. The proposed solution was evaluated by real flight, and then it applied to mass product to improve the paint qual ity of KUH-1 tail blade. Methods: This study investigated an adhesive ability of primer following surface sanding condition. The cross cut and scratch test were conducted to evaluate the adhesive strength. And the water flow test was designed to simulate a real flight condition under rain. Through water flow test, an optimal condition of tail blade to prevent a de-painting phenomenon was deduced. Finally, the improvement method was evaluated by real flight under rain. Results: The results of this study are as follows; The sequential polishing was most excellent method in primer painting quality. The results of test including cross cut, scratch and water flow showed that MIL-DTL-53039 paint with epoxy primer has excellent adhesive ability. To proof the effect of improvement, a real flight during a rain condition was conducted. Finally, the comparison between original and improved configuration was conducted. Conclusion: The painting quality of KUH-1 tail blade was improved through deriving an optimal painting condition. In detail, a condition of optimal sanding and a sort of primer and paint was showed. Finally, the reliability of tail blade was guaranteed through improving the quality of painting.

• Economic and Environmental Geology
• /
• v.13 no.4
• /
• pp.229-239
• /
• 1980

A various kinds of harmful gases in the gallery and the increasing quantity of in-flow water are the important factors causing mainly the decline in production. In this thesis, the increase and decrease of in-flow water which effects the out put have been investigated and analysed in the statistical method. Through the results obtained together with the stastistical data some typical interreation formula between the quantity of in-flow water and production have been induced and the productive percentage in season was examined with special reference to Changsung Coal Mine. The formulas are as fallows: (1) Underground in-flow water to production; $Y=-5.74x^2+108.9x+6,346.6$ where, Y: production(tons/day): x:in-flow water($m^3/min$), (2) Rain and Snow fall to production; P=6.555-1.591 R+1.282S where, P;production(tons/day); R:rain fall(mm); S : snowfall(cm), (3) Productivity ratio in season compared with the average annual production; 1st quarter of year:100.1%, 2nd quarter of year: 100.3%, 3rd quarter of year: 97.2%, 4th quarter of year: 102.4%.

• Journal of Environmental Science International
• /
• v.27 no.8
• /
• pp.689-699
• /
• 2018

The changes on community structures of benthic macroinvertebrates, relevance to the environment and interrelationship between benthos were studied over two years in stream with large environmental disturbance, which caused by localized heavy rain during Typhoon Chaba in October 2016. As a result, the number of species and individuals were increased after localized heavy rain, especially numbers of individuals of Ephemeroptera and Plecoptera were greatly increased. On the contrary, those of Semisulcospira libertina and Semisulcospira forticosta of Mesogastropoda were greatly decreased. Dominant species was Baetis fuscatus of Ephemeroptera, numbers of species and individuals of Ephemeroptera, Plecoptera and Trichoptera(EPT group) were dramatically increased from 26 species, 110 individuals to 32 species, 365 individuals respectively. This suggests that the change of river bed and flow velocity due to heavy rain provided a suitable environment for the EPT group that preferred the rift of a stream. In the functional feeding group, only gathering collectors and filtering collectors were identified in autumn of 2017 because some functional groups preferentially adapted to the changed environment. The interspecific competition and environmental condition were the worst in autumn after heavy rain due to the increase individuals of some species. The ecological score of benthic macroinvertebrate community(ESB) was higher after the heavy rain than before. Results of the Group Pollution Index(GPI), Korean Saprobic Index(KSI) and Benthic Macroinvertebrate Index(BMI) were similar to those before and after heavy rainfall. Therefore, ESB was the most discriminating method for estimating the biological water quality in this study. Some species that are sensitive to water quality changes still appear or increase individuals in the area under investigation after the heavy rain. On the other hand, the individuals of some pollutant species decreased. This is thought to be because the habitat fluctuation caused by heavy rainfall has improved the water environment.

• Journal of Korean Society on Water Environment
• /
• v.25 no.3
• /
• pp.411-418
• /
• 2009

The analysis of characteristics of water use evaluation and nighttime domestic flow evaluation was performed by using result from flow monitoring and surveying water supply records and nighttime domestic flow for a year. The analysis of correlations showed that, for both sites, the infiltration ratio and wastewater flow have shown a good relationship with high correlation factor and that the calculation of wastewater flow was highly affected by monthly rainfall depth as well as number of rain days. From this result, it was concluded that the measurement of infiltration should be performed when the rainfall does not significantly affect the sewer flow. Also, it is notable that each value of calculated using method for infiltration evaluation are not comparable to each other, but independent methods. In selecting of evaluation method for infiltration, therefore, a great emphasis should be imposed to the character of area and the seasonal factor in order to select optimal one. It is desirable way for evaluating infiltration and reduction ratio using result from an optimal method.

• Journal of Ocean Engineering and Technology
• /
• v.28 no.3
• /
• pp.185-192
• /
• 2014

The riser systems for floating offshore structures are known to experience tri-modal dynamic responses. These are owing to the combined loadings from the low-frequency response due to riser tension behavior, middle-range frequency response coming from winds and waves, and high-frequency response due to vortex induced-vibration. In this study, fatigue damage models were applied to predict the fatigue damages in a well-separated tri-modal spectrum, and the resultant fatigue damages of each model were compared with the most reasonable fatigue damage calculated by the inverse Fourier transform of the spectrum, rain-flow counting method, and Palmgren-Miner rule as a reference. The results show that the fatigue damage models developed for a wide-band spectrum are applicable to the tri-modal spectrum, and both the Benasciutti-Tovo and JB models could most accurately predict the fatigue damages of the tri-modal spectrum responses.