• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.614-620
• /
• 2011

Railway intelligent transportation systems and related Ministry of Land and rail operating agency's railway informatization planning of information technology, effective through the use of management strategies to establish or run to support the systematic informatization investment that you want to execute work in progress, during and yet the institutional informatization of operations mainly in the form of efficiency is Chinhae. Accordingly, in order to promote the details of the final challenge of providing real-time information and the usefulness of this information collection is clearly for the railway sector by function of the components is necessary to distinguish. In this paper, the details of the plan goals, promoting convenient rail-based real-time information, to promote optimal gohyoeuleul railways, railway safety and comfort, was defined as three. Selection of each goal, because the direction of vision and ITS around the railroad center of road users by highlighting the benefits of the railroad's traffic information center user switching, real-time delivery of information diversity (enhanced content) that can increase the capacity of line train operating systems, enhancing the safety management system introduced in the monitoring system and is a railroad crossing. Because urban railway project in accordance with the goal of decreasing the annual rate of the train support, and the average passenger wait time savings, increased future demand for railway, rail safety, including securing the expected effects may occur.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.1
• /
• pp.78-82
• /
• 2020

In this study, MOSFETs fabricated on Si-doped, MBE-grown β-Ga₂O₃ are demonstrated. A Si-doped Ga₂O₃ epitaxial layer was grown on a Fe-doped, semi-insulating 1.5 cm × 1 cm Ga₂O₃ substrate using molecular beam epitaxy (MBE). The fabricated devices are circular type MOSFETs with a gate length of 3 ㎛, a source-drain spacing of 20 ㎛, and a gate width of 523 ㎛. The device exhibited a good pinch-off characteristic, a high on-off drain current ratio of approximately 2.7×10⁹, and a high breakdown voltage of 1,080 V, which demonstrates the potential of Ga₂O₃ for power device applications including electric vehicles, railways, and renewable energy.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.4
• /
• pp.281-290
• /
• 2017

Transportation plays a vital role in sustainable development, and moreover, bulk transportation provides cost effective movement of goods and human beings with less environmental issues. Nepal is a developing country with increasing urbanization and transportation demands. The growing interest of China to connect with Southeast Asia through Nepal has led to ambitious project proposal of Rasuwa Gadhi to Birgunj Railways, which is the shortest route from China to India. Lack of updated geospatial data has lead the concerned authorities in Nepal to be dependent on analysis and proposals from donor nations. Taking such considerations, based on GIS and free data, this study explores optimal routes to connect cites using slope and land cover. Based on reclassified slope, two shortest optimal routes were found. One passing through Baireni in Dhading and another through Kathmandu towards Birgunj with length of around 172 Kilometers. The study shows that available open source data can be used of preliminary feasibility studies and yet shows limitations for detailed economy based planning. Development and use of high resolution updated geospatial data is of high necessity for Nepal to become self-sustained in planning of development works.

• Journal of the Korean Geosynthetics Society
• /
• v.11 no.3
• /
• pp.1-9
• /
• 2012

If the railways consisting of soil subgrade is applied to repetitive loading, elastic deformation and plastic deformation will occur at the same time. So the repeat traffic loading condition should be considered to predict the long-term deformation on railway roadbed. In this study, laboratory data from the repeated load triaxial tests and cylinder model test were used to predict accumulated settlement on railway foundation and results were analyed based on the nonliear models and stress state considered. It has proposed predict model using power function model on plastic settlement of roadbed materials.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.3
• /
• pp.335-344
• /
• 2008

In recent years, public complaints against railroad noise by KTX and Ordinary train have been rising. Regulation of railways noise uses same standard without distinguishing the type of railroad cars. According to the type of railroad cars, the frequency characteristics of emitting noise is different. Therefore it is requested to know how the public response vary to each types of railroad cars. The noise annoyance from three types of trains(KTX, electric train, diesel train) was analyzed by jury evaluation test for assessing the effect of frequency characteristics. The numerical results by a semantic differential method showed that annoyance response to three type of trains depended on the frequency characteristics. As a result, this study proposed that the KTX could have a bonus level of maximum 2.9 dB(A) compared to ordinary train.

• Journal of the Korean Society of Safety
• /
• v.20 no.2 s.70
• /
• pp.6-10
• /
• 2005

With the rapid industrial development, railways have become a main traffic means of transportation. However, rail traffic noise and vibration have become a major problem in urban areas which is a very serious issue for the living environment. Especially, railway noise induced by rail operations has influenced on the residents living near railway tracks. The purpose of this paper is to investigate the Raynoise modeling in railway applications. Generally, my acoustics have been used to investigate the effectiveness of noise barriers in railway applications and barriers are modeled using the commercial software Raynoise. A-weighted sound pressure level have been measured at six locations, 4m from the track and are compared with experimental values. Based on the analysis of the results, Comparison between numerical and experimental values are within 1dB (A). Also, when a train is m through the Raynoise modeling, the general influential sphere of railway noise can be determined. Therefore, this study will be using basic data in establishing effective railway noise prevention plans far the future. Also, we could know that is applicable of Raynoise modeling at railway noise.

• Industrial Engineering and Management Systems
• /
• v.3 no.2
• /
• pp.129-133
• /
• 2004

Studies on the optimal location of retail store have been made in case of no obstacle(Minagawa etal. 1999). This paper deals with the location problem of retail store considering obstacles (e.g. rivers, railways, highways, etc.) and obstacle-overcoming points (e.g. bridges, railway crossings, zebra crossings, overpasses, etc.). We assume that (1) commercial goods dealt here are typically convenience goods, (2) the population is granted as potential demand, (3) the apparent demand is a function of the maximum migration length and the distance from the store to customers, (4) the scale of a store is same in every place and (5) there is no competitor. First, we construct the basic model of customers' behavior considering obstacles and obstacle-overcoming points. Analyzing the two dimensional model, the arbitrary force attracting customers is represented as a height of a cone where the retail store is located on the center. Second, we formulate the total demand of customers and determine the optimal location that maximizes the total demand. Finally, the properties of the optimal location are investigated by simulation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.9
• /
• pp.1715-1720
• /
• 2011

Studies suggested an increase in the competitiveness and roles of mainline railways like speed and accessibility improvement, as a fundamental direction of the National Transport Network Plan. At this point, topics presented especially for strengthening the role of human and environment centered transportation: as to the greatly improved speed competitiveness, there are an operational speed above 180km/h ~ 200km/h and traveling within 2 ~ 3 hours among big cities. As to accessibility improvement, there are accessibility to main railway stations within 30 minutes, and the improvement of accessibility, safety, eco-friendliness, amenity etc. As a part of these suggestions, field specific plans were proposed for the establishment of expressed mainline railway network in Korea such as train's, civil structures, trolley lines etc. In this paper we analyzed the conventional lines and systems to figure out whether to change details in terms of H/W of signaling system. Additionally, we reviewed the compatibility or difference of signalling system depending on train's speed. With this result, we deduced the number of virtual blocks specific to the speed of 180km/h, 200km/h and 230km/h, which were showed for the speed improvement considering each variable like blocks, braking distance etc. In this way, we suggested the railway signal system establishment plan considering safety operation.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.4
• /
• pp.416-421
• /
• 2009

Recently, the new Korean Tilting Train Express(TTX) which maintains a speed on the curve railway line is developed. Electric railways, including the TTX, have electrical problems that could bring about serious accidents. For such reasons, the electric railway's electrical problems, electrical harmonic and others, have been studied briskly. Thus, TTX's electrical problems also need leading studies because the new Korean TTX will operate earnestly in 2012. The results could be used hereafter diagnosis of it's components and train conditions. In the paper, electrical signals in TTX operation were measured to analyze electrical harmonic. In addition, after the electrical signals were measured to operating mode (coasting mode, acceleration mode and regenerative breaking mode) respectively in test section(Ho-nam line, Chung-buk line, Jung-ang line and Tae-baek line). The electrical harmonics considered operating modes triparted were analysed and evaluated.

• Journal of the Korean Society of Safety
• /
• v.27 no.5
• /
• pp.99-104
• /
• 2012

A turnelling work beneath roadways or railways in use is unsafe and dangerous. A turnelling method should be analytically and experimentally studied to verify stability and safety of excavating works by construction step. The conventionally analytical method was ineffective in computational time and cost, so the new analytical method named homogenuity method, was developed and verified compared with analytical results. That method was applied to parameterly study the effect of distance of steel supports and overburdening height of soil. It showed that the homogenuity method was very practical and effective in step-by-step analysis considering construction sequences. A measuring device was set at the construction field and mechanical behavior was monitored during construction. Measuring values are larger than analytical values because impact of inserting steel pipes, lowering level of underground water and vibration of passing vehicles affected soil density during construction, but those values were within allowable limits.