• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.1153-1158
• /
• 2005

The e-mailing system has brought in an innovative information sharing of data communications and gained ground as an essential tool in doing business which ranges from delivering inside information. exchanging messages between groups and with customers to electronic advertisements. Making the most of the network communication technology, entrepreneurs have established a solid mailing system in their groupware and portal system where they carry out interactive communications through the aerial transmission. This paper analyzes the research results in the field of mailing system of the railroad portal installed by the Korea Railroad Research Institute and illustrates what has been derived in the course the software development at the same time.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.930-939
• /
• 2009

A bimodal tram is being developed to combine the flexibility of a bus with the punctuality of a train. The propulsion system is a series hybrid type using a set of CNG engine generator and Li-polymer battery. This paper presents the experimental results of the series hybrid propulsion power unit using an active loader which can simulate powering and regenerative braking conditions of the propulsion equipments continuously. The power sharing scheme between PWM converter and a battery pack has been observed. The measurement results of DC link voltage and SOC(State Of Charge) of battery pack are presented.

• Proceedings of the KSR Conference
• /
• 2001.05a
• /
• pp.24-29
• /
• 2001

Despite of the introduction some sorts of the contract and the bid method like CM(Construction management) that will be efficient to manage the construction project. Korean agencies limit to control project management to do large public constructions. In the case of Taiwan, THSRC is apply J/V system in the public construction project, they are accomplishing that expend optimal the cost and save the construction time. To success J/V it has two factors, one is risk management and another is sharing information of construction project. Therefore, we will study to introduce J/V system to our construction project.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.921-927
• /
• 2005

Concurrent engineering is considered in the 21st century product development and H&D. Moreover, advancements in IT and advanced system engineering technology enables to produce high-quality article and shorten the period of R&D. The paper propose work breakdown structure(WBS) based on the product data management(PDM), WEB based system engineering technique, to introduce and operate advanced system engineering technique. We will manage systematically all data produced in advanced urban transit system project based on the proposed WBS. Besides, we provide strategic information for improving efficiency of R&D in advanced urban transit system project. Futhermore, we manage data such as images, design drawings, documents as well as numerical data, and will establish PDM system for sharing the data.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.331-336
• /
• 2008

Magnetic path direction in the back-iron of a linear induction motor(LIM) is perpendicular to that of the lift-magnet of the MAGLEV which is recently developing in KOREA. In general the back-iron is isolated magnetically in conventional rail in order to eliminate the thrust dependency of the LIM on the lift force. However the magnetic isolation causes some increase in construction and management cost. So a unit-type rail system is considered, which the magnetic circuit of the back-iron is sharing that of the lift-magnet. In this paper 3-dimensional analysis for the lift-magnet is carried out using finite element method. As a result, a new shape of the unit-type rail is presented to reduce the magnetic dependency between thrust force and lift force. Also the distribution of magnetic flux density vectors and current-lift force characteristics are presented.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.742-749
• /
• 2008

In 21th century, high oil price and environmental pollution appeared by serious social problem. It brought important change of logistics environment, and environmentally-friendliness and sustainability are emphasized. In spite of that railroad has high energy efficiency and environmental-friendliness to advantage traditionally, there is still transport division rate of railroad in declining tendency as investment policy that is concentrated on road and insufficiency of social realization about environmental problem. The construction of environment-friendly transport system and the reasonable role sharing between modes of transportation are important. Transportation policy of Korea is presented through plans to constructs efficiently and manages national transportation system. In this study, examine development process of national railroad logistics plan with logistics environment change, and proposes the following ways to development of railroad logistics policy.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.6
• /
• pp.853-858
• /
• 2019

One of the methods which can enhance the efficiency of railroad network is construction of interconnection branch line for several route to share one railway. In Korea, this method already has been implemented or excuted as project level. This study suggests a network design model and a solution algorithm to choice most proper site to construction it and determine the priority of branch lines which can be considered in planning level, not project level. The model is a non-linear optimization program which minimize total cost-construction cost, operating cost and passengers' travel cost. The decision variables are a binary variable to explain whether construction or not and its direction and a integer variable of the frequencies of travel routes. The solution algorithm-problem solution and route choice and also the result of implementation for example network are suggested. This result can be more advanced after application in real network and calibration of parameters.

• Journal of the Korean Society for Railway
• /
• v.10 no.2 s.39
• /
• pp.186-194
• /
• 2007

This study was performed to compare the load-carrying capacities of the reinforced concrete structure between the carbon fiber adhesion reinforcement method and the external post-tensioning method and further estimate the effective stress of the reinforced material by analyzing the experimental reinforcing effect of each method and the behavior resulting from each method. As a result, it was found out that the effective stress of the carbon fiber reinforcement according to the carbon fiber adhesion reinforcement method had an unexpected value, and also, bearing of the stress was found to be far from sharing thereof. That is to say, while the carbon fiber was bearing the whole stress to some limits, it got to be momentarily ruptured as soon as it went beyond such limits. On the other hand, the external post-tensioning method has the advantage of inducing an initial effective stress by introducing a strain, and thus, it was found that behavior or bearing of the stress was also found to be a solid behavior of the steel wire. This method was also found to be more efficient and excellent than the carbon fiber adhesion reinforcement method in the reinforcing effect or securing the effective stress. Accordingly, we were to discuss the effective stress as comparatively examined, focusing on deriving of the more enhanced reinforcing effect on the basis of the experiment to which the field characteristic is added.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.6 no.10
• /
• pp.603-612
• /
• 2016

This study will observe the following subjects based on the railroad: First, the development of St. Pancreas Station, which is the gateway to London from other Europe continent, and King's Cross Station, which connects all the intercity within London. Second, the planning characteristic of urban regeneration case which was driven from Camden district, the center of King's Cross Central, which is located in between the two stations, St. Pancreas and King's Cross. Third, based on the the two stations and urban regeneration, this study attempts to investigate the direction of urban regenerating plan and its detailed strategy. As a result, King's Cross Station, St. Pancreas Station and the King's Cross Central area, which is an adjacent area from the two stations, were a slum for a long time. However, the two close stations played a role as the United Kindom and London's railroad network by sharing the common denominator of having the international high-speed railway among the Europe continent and being the connection of National railroads within London. Eventually, based on such potential of railroad traffic, King's Cross Central area was newly regenerated. The consequence of this study has shown that not only the physical modernization of buildings, implementation of compact railroad network supporting both ground and underground of each area or traffic connection was organized in London, but also secured the pedestrian way for easier transfer and planned and allocated facilities by considering citizen's publicness and multilateral use.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.8
• /
• pp.689-696
• /
• 2001

Large-scale Multi-disciplinary Systems(LMS) such as transportation, aerospace, defense etc. are complex systems in which there are many subsystems, interfaces, functions and demanding performance requirements. Because many contractors participate in the development, it is necessary to apply methods of sharing common objectives and communicating design status effectively among all of the stakeholders. The processes and methods of systems engineering which includes system requirement analysis; functional analysis; architecting; system analysis; interface control; and system specification development provide a success-oriented disciplined approach to the project. This paper shows not only the methodology and the results of model-based systems engineering to Automated Guided Transit(AGT) system as one of LMS systems, but also propose the extension of the model-based tool to help manage a project by linking WBS (Work Breakdown Structure), work organization, and PBS (Product Breakdown Structure). In performing the model-based functional analysis, the focus was on the operation concept of an example rail system at the top-level and the propulsion/braking function, a key function of the modern automated rail system. The model-based behavior analysis approach that applies a discrete-event simulation method facilitates the system functional definition and the test and verification activities. The first application of computer-aided tool, RDD-100, in the railway industry demonstrates the capability to model product design knowledge and decisions concerning key issues such as the rationale for architecting the top-level system. The model-based product design knowledge will be essential in integrating the follow-on life-cycle phase activities. production through operation and support, over the life of the AGT system. Additionally, when a new generation train system is required, the reuse of the model-based database can increase the system design productivity and effectiveness significantly.