• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.501-506
• /
• 2004

This paper aims to suggest the feasibility of rapid operation scheme generated in preceding study, 'A study on development of operation planning for rapid service in urban railway(An introduction)' through application it to present subway lines in Seoul Metropolitan area. In case of line 3, without the Passing Track 'Turning train outstrip mode' is the best policy. In case of line 4, with the Passing Trank 'Passing track mode' may be the best way to realize the this scheme. Also, there is feasibility in the line 1, line 5, line 6, line 7 but there is no possibility it is applied to line 2 and line 8. In conclusion, this paper is intend to suggest the possibility of rapid operation in urban railway by presenting real operation scheme, time tables and amount of power usage and the number of composing trains and variety of demand,

• 한국철도학회논문집
• /
• 제8권5호
• /
• pp.477-482
• /
• 2005

Through a year's commercial operation, Korea High Speed Railway has solved defectives from several breakages at the beginning and is going into the stage of stable operation. Among issues, wheel wear becomes a matter of primary concerns in view of vehicle's stability and maintenance. It was understood as above that wear status has been improved in the test by which railway system including vehicles and tracks was stabilized during a year's commercial operation, comparing to that with excessive wear in the trial operation prior to opening to the public. To make out wheel's wear status and characteristics of equivalent conicity at present when the service has been introduced a year ago and the average cumulative mileage of vehicles reach almost 500,000km, wheel's wear types were analyzed with the current vehicles in service.

• International Journal of Safety
• /
• 제9권1호
• /
• pp.12-20
• /
• 2010

In this study, a series of random field test and dynamic analysis in the time domain were carried out in order to find in the reason of fatigue damage of the main and the secondary members in the 3-span continuous steel plate girder railway bridge being under in service over 60 years. From the measured and the analyzed results, the stress distribution patterns were investigated for the members with fatigue damage. In addition, global and local numerical stress analysis was performed for the members damaged severely by corrosion, to estimate variation of the distribution by corrosion. Finally, a reasonable cut-off ratio in the steel plate railway bridge will be proposed by analyzing the equivalent stress ranges according the ratio.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 춘계학술대회 논문집
• /
• pp.52-59
• /
• 1999

As the Korea construction market has recent3y opened, the needs to restructure the design standard for the technical advancement in design is increasing. Therefore, we proposed the design standard of railway according to the direction, which is presented in this study that analyze the present situation of the previous design standard. The new design standard of railway was tried to definite a limit in each service stage. This design standard will improve the design quality and induce the accumulation of technology. In addition, it will solve the organic contradiction of construction service. As a result, this research will bring the improvement in the design standard and contribute to the development of Korea construction industry.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(II)
• /
• pp.834-838
• /
• 2002

As tilting train is the effective solution to provide faster passenger service on conventional railway lines without too costly modification of infrastructure, it is expected that tilting train will be put into service for Korean conventional Railway Lines. Very few passengers may suffer from motion sickness on conventional train and high speed train. But some sickness among passengers of tilting trains have been reported. Up to now, a standardized motion sickness index was mainly developed in the shipping domain. Therefore, there was a need for railway motion sickness index in order to predict and evaluate the motion sickness which is likely to be experienced by passengers. This paper is the preliminary investigation to propose the technical index related to motion sickness and nausea phenomena for the tilting train development and operation.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 춘계학술대회 논문집
• /
• pp.660-668
• /
• 2000

The stress of connection points between railway vehicle equipment and carbody is considered as one of the important railway safety factor under the vehicle service condition. If any material or equipment drop in to the rail during the service condition, the vehicle call be lose its control as well as run off the rail. The be]t safety evaluation method by using hand calculation is broadly used by manufacturer is introduced in this paper. Two different kinds of the bolt, such as regular bolt and the bolt aluminum extruded carbody use, are tested based on U.I.C according to equipment fixed. The effect of holder and base to bolt under tile loading condition is analyzed on this paper.

• International Journal of Railway
• /
• 제1권4호
• /
• pp.134-142
• /
• 2008

Serving as a strategic crossing point for major corridors in Central Europe, Railnet Austria's Infrastructure Network incurs continual increases in international traffic flows and is therefore subject to accumulating traffic congestion with potential restrictions to infrastructure access. This imposes challenges towards preserving open access to Railnet Austria's existing railway network and hinders quality infrastructure service during maintenance, repair, and upgrading. Through Railnet Austria's experiences, the economic viability of a railway network can be sustained through maintaining open access with good quality service of planned trainpaths, thus representing new challenges for future infrastructure maintenance and capacity planning. Railnet Austria's Capacity Management Department has proven that these challenges can be accommodated more effectively through recent technological developments in data warehousing and software development.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1145-1150
• /
• 2008

In this paper, We studied efficient design of wireless transmission system for unified data transmission in a subway and railway. It is increased that need of broadband multimedia service to make useful environment for user and to support the operation of railway system. High bandwidth is better if we need more services. But, high bandwidth requires more cost at tunnel of subway. More bandwidth make receive sensitivity to bad. So it need more wireless Station. We deduced best bandwidth of subway wireless transmission system reflecting the cost of installation and efficiency of system. Consequently, we decide efficient service model of broadband wireless system at a subway. Subway broadband wireless transmission system is tested in this year, and it is to be extended to province subway. Cost of subway broadband wireless transmission system is saved, because the system can be efficiently designed. Therefore, the effectiveness is expected to be very big.

• 한국항만학회지
• /
• 제7권2호
• /
• pp.5-17
• /
• 1993

The decline of railway industry been a world-wide phenomenon. Recently, increased attention has therefore of railway systems has considerable impacts on the existing transport systems. Korea is expecting a era of high-speed railway and thus the need for the preexamination of such system emerges. This study is therefore concerned with the impacts on the conventional railway systems of the planned high-speed railway and its policy implication. The results revealed that the high-speed railway is almost exclusive to the conventional railway system emerges. This study is therefore concerned with the impacts on the conventional railway systems of the planned high-speed railway and its policy implication. The results revealed that the high-speed railway is almost exclusive to the conventional railway systems. The only impact is to induce some users of the conventional railway services, resulting in some excess track capacity of Kyungbu line. It dose however appear not to have any influence on the level of service for the conventional passenger services and rail freight transport. Consequently, it appears desirable to pay as much attention to the conventional railway systems as to the high-speed railway.

• 대한토목학회논문집
• /
• 제36권1호
• /
• pp.115-120
• /
• 2016

본 논문에서는 철도역 연계서비스수준 평가지표 설정 및 적용방안 도출을 위하여 전국 철도역 중 56개소를 선정하여 이용객 접근시간 조사를 수행하고 이를 기반으로 KTX, 일반철도의 연계영향권과 서비스수준(LOS) 평가지표를 도출하였다. 또한 도출된 평가지표를 활용하여 56개 철도역의 연계서비스수준을 평가하였다. 평가 결과 KTX, 일반철도 모두 일부 권역을 제외하고 연계서비스 수준이 모두 "E"등급으로 매우 열악하다는 것을 알 수 있었다. 마지막으로 연계체계 개선을 위한 정비방향을 연계시설 확충, 연계노선의 확충, 혼잡구간 교통체계 개선, 개인교통수단 이용자 및 연계교통시설 이용자를 위한 해당시설의 용량 확충 방향 등을 제안하였다.