• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1623-1629
• /
• 2010

The high speed rolling stock system considerably belongs to a special industry which requires large-scale investment cost but the recovery term is long. Therefore, to guarantee risk and possibility of technological success in initial investment, tools concerned with various expecting methods like life cycle costs analysis and credibility management are used. In view of this characteristics, the cases on cost structure for HSR RS previously invested should be studied and the method to appropriately allocate the life cycle of each sub-system like arrangement unit, electric device, braking device, door and car body should be realized. Moreover, the environmental aspects of main manufacturer and parts supplier can be checked. This study, through the case study for HSR cost structure in introduction and operational stage of KTX, aims to seek for the method to adapt to environmental changes like EU railway industry of which object is to acquire global market competitiveness by integrating manufacturing and operation of RS and the regulation and operation of IRIS which is performed in Europe.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.269-274
• /
• 2005

This paper is studied on earth network configuration when common earth is applied to electrified railway system. And the permitted capacity of buried earth cable used for configuring common earth network and application plan of existing individual earth system when common em1:h network is applied to existing electrification line improvement are studied. For this, the configuration of common earth network is examined according to the SNCF regulation, and the interface between common earth and individual earth is analysed on the basis of the existing track circuit used in electrified line.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.10
• /
• pp.968-975
• /
• 2010

The high interest for the ground vibrations which is caused by the train service is risen. When the trains are passed, a serious force is applied to ground and the caused vibration is propagated to the area of the building by the ground and rocks. This vibration comes to feel in the residents with the direct vibration, it is radiated in sound. The caused vibration and radiated sound affect the human's life, and this vibration brings about the operation interruption of the equipment which is sensitive to the vibration, or will bring about the structural damage of the building. In this study, the effect of the vibrations caused by the passing trains on the railway station and buildings is investigated by vibration measurement. Indoor and outdoor measurement is carried out by each trains.

• Proceedings of the KSR Conference
• /
• 1999.11a
• /
• pp.280-287
• /
• 1999

An automatic train operation(ATO) system executes the operation of constant speed travelling and fixed point parking by using microprocessors instead of drivers manual operation. This paper describes the mathematical model for the train considering unknown disturbances which consist of start resistance, travelling resistance, slope resistance, curve resistance, and so on. The speed controller of ATO system is designed by considering the disturbances. The simulation is executed to verify the speed control and fixed point parking performance and to compare its performance with that of a PID-type ATO control system under disturbances. Simulation results show that the control performance of gain scheduled control scheme fur ATO system is better than that of the conventional PID controller.

• Journal of the Korean Society for Railway
• /
• v.7 no.1
• /
• pp.37-48
• /
• 2004

In this paper, I explain the situations and problems which are focused on the rail freight system. We have a many problems, which have been showed the long freight logistics time, and inadequate fare system. And rail freight system does not have a efficient marketing system, and unit load system. Therefore rail freight has been decreased modal share, which is estimated from 9.65% in 1995 to 6.25% in 2001(ton base). Recently, EU nations and America rail freight system reveals a good outcome, which keeps the balance in the black. The main factors which go into the black, is the enlargement the investment in rail freight and efficient management focusing on the unit load system, fare system, and personnel management. I suggest the several improvement ways, which will be helpful to advance the rail freight system. Fistly, I suggest the speed up the freight rail and efficient fare system. Secondly, I propose the unit load system and the regulation the truck focusing on curtailment of the social cost. Lastly, I make an overture of establishment the comprehensive logistics system.

• Journal of computational fluids engineering
• /
• v.20 no.3
• /
• pp.62-69
• /
• 2015

Pressure change inside cabin as well as in tunnel has been calculated to assess the passenger pressure comfort of high-speed train. $C-STA^{TM}$, a CFD program based on axi-symmetric Navier-Stokes equation and Roe's FDS has been used to simulate the pressure change in tunnel during a high-speed train passing through it. To present the relative motion between the train and the tunnel, a modified patched grid scheme based on the structured grid system has been employed. The simulation program has been validated by comparing the simulation results with field measurements. Extensive parametric study has been conducted for various train speed, tunnel cross-sectional area and tunnel length to the pressure change in cabin. KTX-Sancheon(KTX2) high-speed train has been chosen for simulation and the train speed have been varied from 200 km/h to 375 km/h. The tunnel length has been varied from 300 m to 7.5 km and tunnel area from $50m^2$ to $120m^2$. Total 504 simulations have been conducted varying the parameters. Based on the database produced from the parametric simulations, minimum tunnel cross-sectional area has been surveyed for various train speeds based on Korean regulation on pressure change in cabin.

• Journal of the Korean Society for Railway
• /
• v.9 no.2 s.33
• /
• pp.212-221
• /
• 2006

This paper examines the outcomes and tasks of U rail privatization especially focusing on the rail safety. Earlier research which focused on the rail safety had little knowledge of the explanations for recent changes of safety scheme. Moreover, they had difficulty making a direct comparison of safety between national rail and the privatized rail. Therefore we are left without a good explanation which has a comprehensive perspective. I attempt to show the outcomes of safety in the rail privatization process and its tasks focusing on the recent fatal accident. This paper argues that the UK's rail safety has a framework which is too complicated with overlapping responsibilities that brought about inefficiency, increasing costs. Especially infrastructure enterprise did not come to play an appropriate role. However, after 2000, the government took charge of setting the strategy for railway safety, and the Office of Rail Regulation covered safety, performance and cost. I explain that these changes present a good opportunity to solve the problem of passing the buck for rail accident. Through the analysis, I find that outcomes of rail privatization in safety are improved comparing the national rail. However, safety performance, for example the collision of structures of cars and looseness of rail should be improved. In future, the problems of fatal accident and a bit of duplicate safe system should be addressed.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.30-34
• /
• 2007

Structural integrity of railway vehicles should last for a long period against various and continuous fatigue loadings, and the carbody structures of railway vehicle are manufactured by applying multiform welding types for each material. Since the most of cracks are occurred and proceeded at the vicinity of welding area during the lifetime of carbody structure, the fatigue strength evaluation for welding area of carbody structure should have been carried out. Rotem Company has evaluated lifetime and fatigue strength of carbody structure according to the fatigue analysis based on the international standard and/or inner-official regulation. This study introduces the fatigue analysis method that we have evaluated and calculated the damages for the welding areas of carbody structure under various fatigue loading conditions using cumulative fatigue damage rule(Miner's rule) to verify whether the cumulative damage does exceed unity. This study contains the fatigue test of specimens to derive stress-life relations(S-N curve), sub-modeling analysis and the calculation of cumulative damages under fatigue loading. The fatigue analysis verifies the welding area shall be capable of withstanding under fatigue loading, identifies how critical area shall be selected and presents the principles to be used for design verification.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.11
• /
• pp.2168-2174
• /
• 2009

Electrical railway system consists of rolling stock, track, signal and streetcar line system. Track circuit system is a vital system due to checking the location of trains. Track circuits are divided by using frequency and isolated electrically. Currently, there is not a regulation for the distance between track circuits using identical frequency. In case of installing additional track circuits in large stations or marshalling yard, the problem which is that the signal is not exactly transmitted to the track circuit occurs due to the mutual interference. In other words, the track circuit properly is not operated on account of wrong induction current by the mutual inductance between track circuits. In this paper, we suggest the electrical model between track circuits and numerically calculate demanded parameters in electrical model. The distance between track circuits satisfying the mutual inductance which does not happen to the mutual interference phenomenon is presented about the distance of track circuit. It is proved by using Matlab and PSpice program as the amplitude of mutual induced current.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1092-1096
• /
• 2011

The "standard regulation" of the vehicles from "urban transit law" are being adopted to electric multiple unit in domestic. In the standard regulation, there are two types for EMU. One is heavy EMU for Seoul. The other is large EMU for Pusan, Daegu, Gwangju, Daejeon, Incheon. Korea Railroad Research Institute, with the assistance of the Ministry of Land, Transport and Maritime Affairs, "advanced EMU development project" are progressed, and 6th year started at September, one unit to six cars is completed. Now "urban transit vehicle performance tests are on the current progress. The main characteristics of AUTS(Advanced Urban Transit System) are as follows. One inverter control one motor, DDM(Dircet Drive Motor), no driving gear, plug door and steps, mounting and maintenance costs down, passenger convenience improvement. This paper describes the key features the next generation EMU, and performance test results, and the commercial success method of national R&D business.