• Journal of the Korean Society for Railway
• /
• v.19 no.4
• /
• pp.468-479
• /
• 2016

In order to supply power to online monitoring systems that are attached to high voltage catenary or overhead wires, a wireless power transfer system is required that is able to transmit power over the insulation gap. Such wireless power transfer systems have transmitter and receiver coils that have diameters of over 10cm. This paper focused on an investigation of the sources of loss in the coils when the coils are fabricated using printed circuit board technology. Using finite element simulation results, it has been shown that the dielectric loss in the substrate was the dominant source of the total loss. It has been demonstrated that the selection of a proper dielectric material was the most critical factor in reducing the loss. For further reduction of the loss, the distributed tuning capacitor method and the slotting of the inter-turn spaces have been proposed. For the evaluation of the proposed methods, four coils have been fabricated and their equivalent series resistances and quality factors were measured. Measured quality factors were greater than 300, which means that these devices will be helpful in achieving high coil-to-coil efficiency.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.509-517
• /
• 2008

Rolling stock is the method of railway transportation. Especially, in the subway system which has short headways particularly during the rush hours, even one train's trouble on the main line might influence the whole line. Accordingly, to prevent a train trouble on the main line, high expense is used for the maintenance parts, workforce and facilities, etc. according to the preventive maintenance program. Therefore, in designing a EMU, emphasis should be put on the minimization of trouble and its extending influence on the mainline with the priority of safety and reliability. Seoul subway line 5 is the line that complements the first stage Seoul subway(lines 1,2,3 and 4) and is built deeply with many curved sections causing lots of dust. Studies were made to find out the importance of car design, selection of specifications and continuous maintenance on the basis of the analysis and countermeasure of the line 5 EMU inverter trouble case.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.4
• /
• pp.238-247
• /
• 2018

This paper considers the problem of scheduling loading and unloading operations of a crane in a railway terminal motivated from rail-road container transshipment operations at Uiwang Inland Container Depot (ICD). Unlike previous studies only considering the total handling time of containers, this paper considers a bi-criteria objective of minimizing the weighted sum of the total handling time and tenant service time. The tenant service time is an important criterion in terms of terminal tenants who are private logistics companies in charge of moving containers from/to the terminal using their trucks. In the rail-road container shipment yard, the tenant service time of a tenant can be defined by a time difference between beginning and finishing loading and unloading operations of a crane. Thus, finding a set of sequences and time of the crane operations becomes a crucial decision issue in the problem. The problem is formulated as a nonlinear program which is improved by linearizing a nonlinear constraint in the model. This paper develops a genetic algorithm to solve the problem and performs a case study on the Uiwang ICD terminal. Computational experiment results show that the genetic algorithm shows better performance than commercial optimization solvers. Operational implications in terms of tenants are drawn through sensitivity analyses.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.5
• /
• pp.42-51
• /
• 2019

The train operation institution establishes a transportation plan based on the forecast of transport demand and the ability of train vehicles to transport, and establishes a train operation plan accordingly. The train operation plan adjusts the intervals between trains, creates a timetable (train diagram) for trains, and establishes a plan for the operation of train vehicles used for train operation. The train operation institution shall establish a crew schedule to determine and place the crew members of the trains arranged in the diagram in order to enhance the efficiency of the operation management of the trains. In this study, the authors apply the neighborhood search method that satisfies the constraints at the phase of generating the crew diagram. This suggests a methodology for efficient management of crew schedule plan. The crew diagram generated in this study compared with the existing crew diagram in accordance with the actual operating train timetable, and verified the effectiveness of the suggested method.

• The Korean Journal of Applied Statistics
• /
• v.32 no.1
• /
• pp.139-148
• /
• 2019

This study proposed a multiple intervention time series model to predict KTX passenger demand. In order to revise the research of Kim and Kim (Korean Society for Railway, 14, 470-476, 2011) considering only the intervention of the second phase of Gyeong-bu before November of 2011, we adopted multiple intervention seasonal ARIMA models to model the time series data with additional interventions which occurred after November of 2011. Through the data analysis, it was confirmed that the effects of various interventions such as Gyeong-bu and Ho-nam 2 phase, outbreak of MERS and national holidays, which affected the KTX transportation demand, are successfully explained and the prediction accuracy could be quite improved significantly.

• Journal of the Korean Institute of Rural Architecture
• /
• v.21 no.2
• /
• pp.27-34
• /
• 2019

This study explores the emergence of a modern form of Cheongju-eup townscape in the late 1930s by re-examining the 1960s restoration model of Seongan-dong and Jungang-dong in Cheongju, one of the historic cities in South Korea. According to the acquired data from the restoration model, it is found that the construction of a new urban area during the late 1930 was resulted from the following events: the development of a railroad station located outside of the north gate of Cheongju-eup since 1921, the completion of Musimcheon embankment outside the south gate in 1932, and the construction of Chungcheongbuk provincial office outside the eastern gate in 1937. In this period of development, which the author named 'Cheongju-eup period', the streets in the old castle, consisting only of two-story financial buildings, had been expanded from the existing area at the Seongan-gil intersection to the outside the east gate of Cheongju-eup. In addition, public government buildings, which were mainly located in both Seongan-gil and Yulgok-ro in the east-west direction, were newly constructed during the late 1930s in Seokgyo-dong, a new area in which a large number of commercial buildings including department stores, clothing stores, shoes shops, and watch stores were also built along the streets. Moreover, the modern form of Cheongju-eup was to be formed by several construction projects in the area of Jungang-ro in the late 1930s. Until the 1920s, the townscape outside the northern gate of Cheongju-eup, were composed of primary, agricultural, and female schools built on a largest site of Gyoseo-ro and Daeseong-ro as well as a transportation warehouse and a railway office near the Cheongju station. Then, entering the 1930s, new school buildings and domestic industrial shops and factories were built around the area of Jungang-ro ranging from the railway outside the northern gate to Bangadari. As a result, the expansion of townscape with newly constructed buildings in the late 1930s marked the emergence of a modern form of Cheongju-eup.

• Journal of Korean Port Research
• /
• v.7 no.2
• /
• pp.37-60
• /
• 1993

Because of the rapid growing traffic volumes of cargo, especially between Seoul and Inchon, and lack of investment into transport infrastructure in the past, in Kyong-in area have suffered from the serious traffic congestion in the public-road and the express-way network, But the further expansion of the traffic volume in near future is difficult due to burden of the higher expansion of the traffic volume in near future is difficult due to burden of the higher construction cost. Although the traffic congestion on the Kyung-in railway, is not very serious comparing with the road sector, the shortage of capacity on some main lines becomes emerged as a problem as railway traffic has increased. Unlike these two modes, the water transport, which has been paid relatively less attention for commodity transport in Kyong-in area, has not any constaint in this respect. Han river has been used as a water transport route in Chosun Dynasty which is called Cho-wun. This paper therefore aims to propose the availability of Han river as the alternative water transportation mode, in order to decrease the congestion between Seoul-Inchon by considering the construction of Kyong-in artificial water channel in near future. In this paper, we investigate the availability of Nanji-do as the physical distribution depot connecting with the circulation express way in the national capital distribution depot connecting with the circulation express way in the national capital. We also estimate the traffic volume by using the push-barge carrier (300DWT) in the same channel through the simulation under some assumptions such as ship's turnaround time, speed, etc.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.3
• /
• pp.363-370
• /
• 2023

Due to the spread of COVID-19, the use of public transportation such as urban railroads has changed significantly since the beginning of 2020. Therefore, in this study, daily time series data for each urban railway station were collected for three years before COVID-19 and after the spread of COVID-19, and the similarity of time series analysis was evaluated through DTW (Dynamic Time Warping) distance method to derive regression centers for each cluster, and the effect of various external events such as COVID-19 on changes in the number of users was diagnosed as a time series impact detection function. In addition, the characteristics of use by cluster of urban railway stations were analyzed, and the change in passenger volume due to external shocks was identified. The purpose was to review measures for the maintenance and recovery of usage in the event of re-proliferation of COVID-19.

• Industry Promotion Research
• /
• v.8 no.3
• /
• pp.9-17
• /
• 2023

The purpose of this study is to look for the trends and rates of change of major passenger modes such as railway, subway, domestic shipping, domestic airline, international shipping and international airline. The data used were selected from the KOSIS, "Domestic Statistics, Statistics by Subject, Transportation and Logistics". The analysis period was 22 years from 1999 to 2020, and the annual rate of change from the previous year was calculated. In descriptive statistics, international shipping and international airlines showed relatively high volatility, whereas railway and subway showed low volatility. In the rise rate analysis, international air and international shipping dropped significantly from 539% and 368% in 2019 to 85% and 20% in 2020 due to Corona. International airline and international shipping fell significantly in 2020, but we expect them to rise again as the shock of Corona disappears in the future. Therefore, it seems that we need a project to prepare for this. International air and international shipping are expected to continue their upward trend as international trade picks up again and international travel regains its momentum.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.1
• /
• pp.565-570
• /
• 2024

Recently, due to adjacent excavation work such as new buildings and common tunnel expansion concentrated around the urban railway, deformation of the underground box and tunnel structure of the urban railway built underground has occurred, and as a result, repair and reinforcement work is frequently carried. In addition, the subway is responsible for large-scale transportation, so ensuring the safety and drivability of underground structures is very important. Accordingly, an automated measurement system is being introduced to manage the safety of underground box structures. However, there is no analysis of structural damage vulnerabilities caused by subsidence or uplift of underground box structures. In this study, we aim to analyze damage vulnerabilities for safety monitoring of underground box structures. In addition, we intend to analyze major core monitoring locations by modeling underground box structures through numerical analysis. Therefore, we would like to suggest sensor installation locations and damage vulnerable areas for safety monitoring of underground box structures in the future.