• Journal of the Korean Society for Railway
• /
• v.12 no.4
• /
• pp.535-541
• /
• 2009

The reliability of control system composed of electronic parts has been studied by DoD since 1960, and has been undertaken mainly by Europe for railways. Especially in Korea, a study on reliability of signalling equipment has been taken since 2000, requiring reliability test for effective maintenance of old type signalling equipment which no longer has information on its past reliability. This study evaluates the reliability test in units of parts for old type signalling equipment; for instance, failure rate in units of parts, or failure data during operation; which was utilized without its consistent reliability monitoring and analysis data for over 20 years. Also, reliability change at this point in time has been estimated by using residual life span function, and a model which can evaluate the possibility of extended operation through stress acceleration test has been developed. This model will be utilized to establish future maintenance policy for train operating company's operation on old type signalling equipment.

• Journal of the Korean Society for Railway
• /
• v.12 no.5
• /
• pp.670-677
• /
• 2009

This paper is a study of testing on-board signalling equipment in advanced high speed rail at the maximum speed of 400km/h. The on-board signalling equipment in advanced high speed rail provides operating information to the driver when operating at ATC, ATS, and ATP sections, and maintains safety from driver oversight, signalling equipment malfunction, natural disasters and so on. Since the testing train performance of advanced high speed rail at 400km/h must include the function test of on-board signalling equipment, this thesis focuses on the function test of on-board signalling equipment and analyze the necessity of the test at the maximum speed. Finally, it is suggested to change some infrastructure and to use specific test methods to test the train performance at the maximum speed in high speed line ATC section.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.1
• /
• pp.208-213
• /
• 2016

In order to detect the exact position of high-speed train, it is necessary to obtain location information from the transponder tag installed along the track. When the transponder tag receives the energizing signal from the train, it sends a telegram to the reader, which includes location information. In high-speed railway environment, this telegram can be corrupted by electromagnetic interference caused by onboard electric train power equipments or wayside devices. In order to assess the performance of transponder system under this harsh environment, we carried out field test using HEMU-430X. Field test results are briefly introduced and discussed for the evaluation of the transponder system under development.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1382-1387
• /
• 2007

ERTMS/ETCS is a signalling and control system designed for interoperability between railway networks. In this paper, SysML was used for modeling of the ERTMS/ETCS trackside system. We used use case diagrams and sequence diagrams for requirements analysis and functional analysis. By doing this, we could show that main functions of the ERTMS/ETCS trackside can be described and verified based on scenarios.

• Journal of the Korean Society of Systems Engineering
• /
• v.11 no.1
• /
• pp.49-54
• /
• 2015

The RAMS Process is the Internationally required activity to secure Reliability, Availability, Maintainability, and Safety of system which will be acquired as customer requirements. The importance are situations that have been growing gradually. Specially, When developing railway system, the needs of customer about RAMS Process has been being proposed in a variety of railroad business. Through this paper, It introduces the international standards described the RAMS Process and also presents the requirements that should have to comply with it. Furthermore, the necessary activities to get certificate of a Railway system are suggested and not only the various acquisition cases of certificate but also lessons learned by cases in the field of railway signalling system are presented.

• Journal of the Korean Society for Railway
• /
• v.7 no.2
• /
• pp.114-119
• /
• 2004

According to the computerization of railway signalling systems. the communication protocol for interface between these systems are required. Therefore the new communication protocol for railway signaling system is required. Generally, there are two verification method for new designed protocol in the industrial and academic fields. One is the laboratory testing method which is very popular and general technique. In our research the comparison between existing and new designed protocol for signaling is described and the verification test results are also represented. From these laboratory test, we are verified the conformance of new designed protocol. Another method is verified by formal method. The format verification method is widely used at safety-critical system design but this approach is nor popular at verification communication protocol. However it is very important to verify the safety of new designed protocol for railway signaling system because signaling systems are very safety-critical systems. So, the methodology for formal verification of designed protocol is also reviews in this paper.

• Journal of the Korean Society for Railway
• /
• v.9 no.5 s.36
• /
• pp.601-605
• /
• 2006

Reliability of the Railway signaling system which is safety critical is determined by reliability of hardware and software. Reliability of hardware is easily predicted and demonstrated through lots of different studies and environmental tests, while that of software is estimated by the iterative test outcomes so estimates of reliability will depend on the inputs. Combinations of inputs to and outputs from the software may be mostly combinatoric and therefore all the combinations could not be tested. As a result, it has been more important to calculate reliability by means of a simpler method. This paper identifies the reliability prediction equation applicable to reliability prediction for railway signaling system software, and performs the simulation of onboard equipment of automatic train control for high speed train to review reliability prediction and validity.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.2056-2062
• /
• 2009

Recent advances in computer technology have brought more dependence on software to train control systems. Hence, the safety assurance of the vital software running on the railway system is very critical task and yet, not many works have been done. While much efforts have been reported to improve electronic hardware's safety, not so much systematic approaches to evaluate software's safety, especially for the vital software running on board train controllers. In this paper, we have developed the static software testing tool for railway signaling, especially Fagan Inspection supporting tool. This static testing tool for railway signaling can be utilized at the assessment phase, and also usefully at the software development stage also. It is anticipated that it will be greatly helpful for the evaluation on the software for railway signalling system.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.872-878
• /
• 2009

Passenger safety is a primary concern of the railway system. However, dozens of people are killed every year when they accidently fall on to the track from the boarding platform. This is one of the most urgent issues to solve regarding the railway platform. The installation environment, and the blind area problems as well as maintenance and operating costs which are not efficient have to be looked at. To solve these problems, we propose a 3D laser radar sensor based monitoring system for the railway platform. This paper introduces an overview, the detecting method, and the interface with the signalling system in detecting a fallen passenger from the platform using the 3D laser radar sensor.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1272-1274
• /
• 2002

It is very important to ensure system safety during the process of developing a system, Railway system is also devoting a great portion for the safety. Nowadays many countries leading railway industry have their own system assessment process according to the situation of their train control system. In this paper, a preprocess to establish system safety requirement is represented in the railway signalling system. We also adopt electronic interlocking system for an example.