• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.1227-1231
• /
• 2001

To provide faster service and to relief the road traffic jam, the increase of service speed of conventional railway has been intensively considered. In this study, we measured and analyzed the vibration ride comfort of Saemaeul Train to evaluate the feasibility of 5km/h speed-up in curves and l0km/h speed-up on straight tracks. Four main lines, such as Honam, Kyungboo, ]anghang, Kyungjeon were chosen as representative lines for speed-up feasibility study. The increase of mean ride comfort index in case of speed-up is 0.5-2㏈. The mean ride comfort index of vertical direction in case of speed-up is 107 ∼110 ㏈ for Honam line, 104 ∼112 ㏈ for Kyungboo line, 108∼112 ㏈ for Janghang line and 105∼108 ㏈ for Kyungjeon line. Through this study, we found that the Saemaul Express has slight margin to increase the service speed from the view point of vibration ride comfort.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.442-445
• /
• 2011

Concrete track on the new railway lines of the existing roads are built on high ground, or less than 400m radius of the sharp curve sectors will occur. sharp curve sectors the rail and wheel friction, stick-slip due to the band of 1,000Hz or squeal noise occurs from the increase in civil complaints about noise is a real situation. In this study, discussed in previous studies, noise measurements for each radius of concrete track and frequency analysis, followed by the radius of the curve in order to investigate vibration characteristics of urban railway sector sharp curve radius less than 400m and 400m ~ 1,000 m further to the point selected track components(rails, sleepers, ballast) according to the vibration measurements and analysis of the frequency characteristics and the results were derived.

• 한국소음진동공학회논문집
• /
• 제14권3호
• /
• pp.224-229
• /
• 2004

In order to control the railway noise, the radiation characteristic of the noise when the train passes by should be analyzed. Generally, the major noise sources of the Korea Train Express are the rolling noise and power unit noise up to 300km/h. In this paper, a train model that is considered to be a row of point sourcesis introduced to analyze the radiation characteristic. The analysis results are compared with the measurement ones. It is shown that the propagation characteristic of the rolling noise is a dipole type and the noise generated by the power unit is radiated as a cosine type. With increasing of the train speed, the noise level at a receiving point is increased in the direction of motion and reduced in the direction opposite to the motion. The analysis results including the moving effect of the noise source at 300km/h show good agreement with the measurement results.

• Structural Engineering and Mechanics
• /
• 제77권2호
• /
• pp.231-243
• /
• 2021

In this paper, a dynamic response mapping model of the wheel-rail system is established by using the support vector regression (SVR) method, and the hierarchical safety thresholds of the subgrade void are proposed based on the reliability theory. Firstly, the vehicle-track coupling dynamic model considering the subgrade void is constructed. Secondly, the subgrade void area, the subgrade compaction index K30 and the fastener stiffness are selected as random variables, and the mapping model between these three random parameters and the dynamic response of the wheel-rail system is built by using the orthogonal test and the SVR. The sensitivity analysis is carried out by the range analysis method. Finally, the hierarchical safety thresholds for the subgrade void are proposed. The results show that the subgrade void has the most significant influence on the carbody vertical acceleration, the rail vertical displacement, the vertical displacement and the slab tensile stress. From the range analysis, the subgrade void area has the largest effect on the dynamic response of the wheel-rail system, followed by the fastener stiffness and the subgrade compaction index K30. The recommended safety thresholds for the subgrade void of level I, II and III are 4.01㎡, 6.81㎡ and 9.79㎡, respectively.

• 한국철도학회논문집
• /
• 제16권5호
• /
• pp.358-364
• /
• 2013

전편에서 제시되었던 진동소음 데이터를 기초로 하여 철도차량기지 주변에 기 건설되어 있던 고층아파트 단지의 진동소음 방지대책 수립에 필요한 쟁점들을 검토하고 설계단계에서 필요한 방진기법을 논하였다. 특히, 차량운행속도, 인공대지의 물리적 특징, 건축물 지지구조의 물성치, 아파트 층별구조의 동특성 등에 대하여 진동측면에서 논의하였다. 논문에서 제안된 설계변수와 사례는 향후 개발 예상되는 철도 주변 부지 건축물의 환경문제를 최소화하는 가이드라인으로 사용될 수 있다. 특히, 주민이 거주하는 건축물에 대해서는 설계단계에서부터 합리적인 소음진동 방지대책의 적용이 요구되며, 적극적인 대책을 수립하면 사회적인 비용 또한 저감될 수 있을 것으로 판단된다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 추계학술대회 논문집
• /
• pp.226-227
• /
• 2010

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.454-458
• /
• 2005

Light railway system has many characteristics of better accessibility, frequency service, low construction cost, reduced air pollution and medium capacity public transport etc. Light railway system as a urban transportation system has been glowing worldwide since the late 20th century. More than 300 cities around the world have light railway systems. Many medium-size cities in domestic site is planning the construction of light railway. This paper reviews the domestic and foreign light railway system.

• 한국소음진동공학회논문집
• /
• 제11권7호
• /
• pp.267-274
• /
• 2001

This paper introduces experimental results related to the vibration ride conditions that a korean male subject experienced in the nationwide railway trains and the express bus. Two types of railway train's Saemaulho and Mugunghwaho. and the express bus were chosen to measure how much the whole-body vibrations on the contact area of the back , hip and feet are exposed to the subject. Measured vibration signals were analysed to assess the rife conditions quantitatively and qualitatively. Analysed results are illustrated to unveil how much typical public transportation system in Korea expose whole-body vibration to passengers. Futhermore, the performance evaluation of their seats were carried out to examine their effectiveness in reducing vibration exposure to passengers.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.1100-1104
• /
• 2001

This paper introduces experimental results related to the vibration ride conditions that a korean male subject experienced in the railway trains and the express bus. Two types of railway train's, Samaulho and Mugunghwaho, and the express bus were chosen to measure how much the whole-body vibrations of the back, hip and feet are exposes to the subject. Measured vibration signals were analysed to assess the ride conditions quantitatively and qualitatively. Analysed results are illustrated to see how much typical public transportation systems in korea expose vibration to passengers.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.713-719
• /
• 2012

This paper is concerned with the dynamic modeling for the hardware-in-the-loop simulation of lateral vibrations of a railway vehicle. The resulting dynamic model is a nine degree-of-freedom model which can describe the lateral, roll and yaw motions of the car body and two bogies. It is assumed that the external disturbances come from wheel motions. In order to test the efficacy of the model, the linear quadratic regulator and the sky-hook control algorithm were designed and applied to the model. The simulation results show that both control algorithms are effective in suppressing the vibrations of railway vehicles.