• Journal of the Korea Safety Management & Science
• /
• v.12 no.4
• /
• pp.175-181
• /
• 2010

The government have plans to improve the railway transport capacity and transport hub for the sustainable national transport and logistics system. Specially, there are much efforts to improve transportation capacity such as high speed transportation of rail freight, enlargement of BT train, development of double stack train, etc. between railway transport hubs. If the transport capacity between railway logistics hubs is increased as planned, we must increase the handling capacity of railway hub terminals. But there are limits to enlarge the terminal infrastructure because of investment scale, location circumstances and urban development plans. To ensure the capacity, with the minimum required enlargement of infrastructure, it is necessary to extremely increase the efficiency of terminal operations. For improving the efficiency, we have to introduce the efficient terminal operation systems based on u-IT and operation optimize technologies. In this paper, we analyse the issues and problems of railway terminals(including ICD) and suggest the concept of intelligent railway terminal and the construction components of technology.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.50 no.5
• /
• pp.248-254
• /
• 2001

The traction power demand highly varies with time and train positions and the traction load is a large-capacity current at single phase converted from 3-phase power system. Subsequently, each phase current converted from 3-phase power system cannot be maintained in balance any longer and thus the traction load can bring about imbalance in three-phase voltage. Therefore, the exact assessment of voltage unbalance must be carried out preferentially as well as load forecast at stages of designing and planning for electric railway system. The evaluation of unbalance voltage in areas, such as electric railway depots should be a prerequisite with more accuracy. The conventional researches on voltage unbalance have dealt with connection schemes of the transformers used in ac AT-fed electric railroads system and induced formulas to briefly evaluate voltage unbalance in the system(3). These formulas are still being used widely due to their easy applicabilities on voltage unbalance evaluation. Meanwhile, they don't take into account detailed characteristics of ac AT-fed electric railroads system, being founded on some assumptions. Accordingly. accuracy still remains in question. This paper proposes a new method to more effectively estimate voltage unbalance index. In this method, numerous diverted circuits in electric railway depots are categorized in three components and each component is defined as a two-port network model. The equivalent circuit for the entire power supply system is also described into a two-port network model by making parallel and/or series connections of these components. Efficiency and accuracy in voltage unbalance calculation as well can be promoted by simplifying the circuits into two-port network models.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1390-1394
• /
• 2009

In the paper We have analyzed the case study of the domestic and foreign railway logistic information systems based on the railway logistic to build the information architect basis system of real-time simultaneous. In case of domestic examples, We have analyzed the logistic information system used in Korea Railroad and the information systems of Kyungin ICD(Inland Container Depot) and Busanjin CY(Container Yard). In case of foreign example, we have analyzed the logistic information system of Japanese FRENS(Freight information network system) and the examples of freight tracking using RFID(Radio Frequency Identification). Through the above analysis, We have induced the main problems and improvement methods. We are able to build the railway-oriented information network system for the massive and efficient railway transportation.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1765-1768
• /
• 2009

Honam area is one of the under-industrial areas in Korea and because of this it has low weight in the total container transportation in Korea. Also the railway distance from honam area to the main container ports like Busan port and Gwangyang port is so short that the portion of rail container transportation occupies about 10 percent in total container transportation amount in Honam area. But on the contrary of those situations, 1st step Jangsung inland container depot (ICD) was finished as one of the main logistics facilities in Korea and 2nd Jangsung inland container depot is under construction. To promote rail container transportation in Honam area which has shortage of container transportation demand, it is necessary to give adequate transport service to the client. So, this research studied some methods for promoting rail container transportation in Honam area. The subject of survey is freight agent and survey items are selected to find the present situation of rail container transportation in Honam area. And from the survey results various strategies will be suggested to promote rail container transportation in Honam area.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1481-1498
• /
• 2007

As railroad industry face the new Renaissance era, effective and efficient maintenance methods for rolling stock operation are required with advanced railroad technology. All kinds of railroad systems such as high speed long distance train, metropolitan mass transit and light rail require systematic maintenance technology in order to maintain the safe railroad operation. Simulation models for detailed operations of the sample maintenance center are developed. In this study, standard maintenance procedures, layout, equipments and number of workers of Siheung Metropolitan Railroad Maintenance Rolling Stock Depot are considered. The proposed simulation models are developed using simulation package ARENA. Three simulation analysis using the developed simulation model are done. First, the bottleneck operation is identified. Second, the relationship between maintenance center size, number of workers and cycle time is analyzed. Lastly, the scheduling performances between PERT/CPM and Critical Chain Project Management(CCPM) are compared.

• Journal of Korean Port Research
• /
• v.7 no.2
• /
• pp.37-60
• /
• 1993

Because of the rapid growing traffic volumes of cargo, especially between Seoul and Inchon, and lack of investment into transport infrastructure in the past, in Kyong-in area have suffered from the serious traffic congestion in the public-road and the express-way network, But the further expansion of the traffic volume in near future is difficult due to burden of the higher expansion of the traffic volume in near future is difficult due to burden of the higher construction cost. Although the traffic congestion on the Kyung-in railway, is not very serious comparing with the road sector, the shortage of capacity on some main lines becomes emerged as a problem as railway traffic has increased. Unlike these two modes, the water transport, which has been paid relatively less attention for commodity transport in Kyong-in area, has not any constaint in this respect. Han river has been used as a water transport route in Chosun Dynasty which is called Cho-wun. This paper therefore aims to propose the availability of Han river as the alternative water transportation mode, in order to decrease the congestion between Seoul-Inchon by considering the construction of Kyong-in artificial water channel in near future. In this paper, we investigate the availability of Nanji-do as the physical distribution depot connecting with the circulation express way in the national capital distribution depot connecting with the circulation express way in the national capital. We also estimate the traffic volume by using the push-barge carrier (300DWT) in the same channel through the simulation under some assumptions such as ship's turnaround time, speed, etc.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.2359-2373
• /
• 2008

In 1991, Korean government decided to establish the Inland Container Depot for activating transportation of rail freight container and encourage the effectiveness of intermodal transport system. Therefore, the Ui-Wang ICD has been built in Kyonggi province and began to operate in 1993. However, Despite of original purpose of the Inland Container Depot, rail freight volume at public CY(Container Yard) in Ui-Wang ICD has been recorded very low. This paper deals with the promotion strategy for rail transport in Ui-Wang ICD. The relationship of conflicts between the rail-oriented transporters and road-oriented transporters in Ui-Wang ICD have been found through the TOC thinking process and some solutions are suggested. Some undesirable effects in operation of Ui-Wang ICD are listed and current reality tree(CRT) has been established and future reality tree(FRT) which includes some injections to active the rail transport in ICD has been recommended based on CRT. In order to make good solutions the situation in Busan-jin station ICD known as similar to Ui-Wang ICD has been analyzed.

• Journal of the Korean Society for Railway
• /
• v.9 no.3 s.34
• /
• pp.282-290
• /
• 2006

In the current train operation system, large scaled stations like Cheongnyangni and Yongsan are not remote controlled from the central operator but manually by local operator. It is because there are so many entering and exit of trains between depot and mainline which are operating through the large scaled stations and it is very effective to traffic flow on the mainline. Therefore, Kyong Bong Technology Co., Ltd. (KBTech) and Korea Railway Research Institute (KRRI) are continuing the research and development to import 'Autonomous Decentralized System (ADS)'as part of a new train operation control system which is a national policy project of MOCT (Ministry Of Construction & Transportation). The concept of the 'Autonomous Decentralized System (ADS)' has born in 1970's in Japan by the influences of molecular biology. The special features of ADS are being a system that able to do the online expansion, online maintenance and fault tolerance. This thesis introduces the concept of technology of ADS and also describes the system designing & development to apply with large scaled stations.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.3
• /
• pp.526-531
• /
• 2016

This paper presents an experimental study on the optimal settings for the selected DC fault relay (50F) to improve the operating performance for the high-speed circuit breaker on DC feeding system which ensure safety within rolling stock maintenance depot. In this study, current supplied to overhead contact wire was calculated on 1 ms interval to analyze the correction values of DC fault selective relay for the operation of current supply cutout. Particularly, standards for the accurate detection of accidents between an electric railway vehicle and the electric power facilities are shown by investigating the optimal correction values for detection of fault current, and the results indicated that it takes about 213 ms for the DC fault selective relay(50F) to fully open. In the future, the correction values of DC fault selective relay suggested in this paper will be used as the reference values of protective relay for the safe operation of DC electric railroad system such as urban railway.

• Journal of the Korean Society for Railway
• /
• v.13 no.5
• /
• pp.535-540
• /
• 2010

We present an optimization model for how to assign the freight trains to transshipment tracks and allocate the containers to the freight trains in a rail container terminal. We formulate this problem as a multi-criteria integer programming to minimize the makespan of job schedule and simultaneously to maximize the loading throughput, i.e. the number of containers to be disposed per day. We also apply our model to the instance obtained from the real-world data of the Uiwang Inner Container Depot. From the experiments, we can see an improvement of approximately 6% in makespan, which means that our model can contribute to the improvement of the disposal capacity of containers without additional expansion of facilities.