• 한국철도학회논문집
• /
• 제17권2호
• /
• pp.133-139
• /
• 2014

국내에 건설 운영 중인 경전철 고가구조물은 설계 당시 경전철 고가구조물 설계기준이 마련되어 있지 않아 일반 철도교 설계기준 및 국외 차량제작사에서 제시한 설계기준을 참조하여 설계된 관계로, 고가구조물이 과다 설계되어 비경제적으로 건설된 주된 이유가 되고 있다. 본 연구에서는 고무차륜형 경량전철이 고가구조물 위를 각각 50km/h, 60km/h, 70km/h의 속도로 주행 중 5개 제동 지점별로 제동 시 고가 하부구조물에 작용하는 제동하중을 현장 계측시험을 통해 분석하였고, 현재 설계시 반영되고 있는 철도설계기준과 비교하였다. 본 연구에서 제시된 제동하중 시험분석 결과는 향후 경전철 고가구조물 설계기준 제정 시 참조될 수 있다.

• 전기학회논문지
• /
• 제60권12호
• /
• pp.2392-2396
• /
• 2011

This paper deals with the power integration of large urban railway systems to improve regenerative energy utilization. Current regenerative energy utilization is low because there is no special plan for using this energy. If the railway system is integrated with other railway systems, the efficiency is expected to be improved. Through the case studies, to find the realistic effect of integrated operation, real system for the Seoul Metro lines, especially line 5 and 7, had been applied.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1761-1765
• /
• 2008

In the braking of a railroad car, mechanical brake systems using wheel tread and brake disk are applied as well as electrical brake systems by regenerator and rheostat. It is very important to consider the frictional characteristic because kinetic energy of the vehicle is dissipated as converted thermal energy through friction between disk and brake pad during disk braking. A friction coefficient and wear characteristic are decided from the interrelationship of disk and friction material in the disk brake system. Lab-scale dynamometer test on developed brake disk materials for increasing heat resistance was performed in this study. Each candidate material was tested at various braking speeds and pressures and we obtained the friction coefficient and wear characteristic. And we executed comparative evaluation of the result from the test.

• 대한기계학회논문집A
• /
• 제40권9호
• /
• pp.835-842
• /
• 2016

국내 도시철도차량의 유지보수는 대부분 예방정비에 기초하고 있다. 기존 유지보수 방법의 한계를 극복하기 위해, 상태기반 유지보수기법을 철도차량에 적용하려는 움직임이 최근 활발히 진행되고 있다. 본 연구는 도시철도차량 제동장치의 핵심 고장부품인 솔레노이드 밸브에 대하여 전류기반 고장진단기법 개발을 시도하였다. 주요 고장부품으로 선정된 솔레노이드 밸브에 대하여, 등가회로모델 및 온도 보상된 전류 감시에 기반한 고장 진단법을 제안하였다. 제안한 고장 진단법의 유효성을 검증하기 위해 실제 도시철도차량에 사용되는 솔레노이드 밸브(상용제동 전자밸브)를 이용하여 사례연구를 진행했다. 본 연구는 철도차량 제동장치의 솔레노이드 밸브 고장진단이 추가 센서의 장착 없이 가능함을 보여주었고, 철도차량의 안전성 및 신뢰성 향상에 도움을 줄 것으로 기대한다.

• Journal of Electrical Engineering and Technology
• /
• 제8권5호
• /
• pp.1070-1077
• /
• 2013

Owing to the consistent increase in energy efficiency issues, studies for improving regenerative energy utilization have been receiving attention in the Urban DC railway systems, where currently, the utilization of regenerative energy is low due to the lack of a specific plan for using this energy. The regenerative energy in railway systems has a low efficiency problem which results in the increase of the catenary voltage and a possibility to create problems to the electrical devices connected to the system. This paper deals with the power integration of large urban railway subsystems to improve regenerative energy utilization where the railway subsystems are integrated with other railway subsystems to improve the energy efficiency. Through the case studies, to find the realistic effect of integrated operation, the Seoul Metro subsystems, namely Line 5 and Line 7, has been applied. Also, evaluation for the electricity cost saving has been performed by using KEPCO electricity cost table.

• Journal of Electrical Engineering and Technology
• /
• 제11권1호
• /
• pp.257-264
• /
• 2016

In this paper, new electric railway feeding system which has active transformer is modeled for evaluating the steady state analysis using PSCAD/EMTDC. Equivalent models including power supply, feeder, train and transformers are proposed for simplifying the model of the feeding system in high speed electric railway. In case study, simulation results applied to proposed model are compared with the conventional and new systems through the catenary voltage, three-phase voltage of PCC (Point of Common Coupling) and the efficiency of regenerative braking energy.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.451-454
• /
• 1995

Increasing the transfortation efficiency is very important issue in railway system. Speed-up of train and shortage of headway can be its solution. Headway can vary with blocksection length, characteristics of the railway and signalling systems. Safety braking distance needed for passenger's safety is very important factor in block section division method. In this study, basic block section division program was developed with the differential ratio of braking distance resulted by grade value of the track. More complete block section division program is going to be developed by the help of experienced experts.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 춘계학술대회 논문집
• /
• pp.308-315
• /
• 2000

Headway calculation is a important mean to evaluate railway system performance. A accurate headway calculation can be needed to headway reducing being achieved line capacity increasing by regulating signals spacing without any line construction. This paper introduced the theories and algorithms of calculating headways on wayside, multi step, one step braking and moving block signalling systems and showed some results of headways.

• 전기학회논문지
• /
• 제63권10호
• /
• pp.1479-1484
• /
• 2014

This paper deals with regenerative energy in railway system which one of the largest customer in terms of load capability. Unlike the other loads of power system, loads of railway systems change in time and space. It has a characteristic amount of generating regenerative energy by frequent starting and braking in railway system. Therefore, it is expected higher utilization in railway system than the other systems. The purpose of DC power supply simulation is analyzing backed energy, regenerative energy by each railway vehicle and substation. In this paper, regenerative energy utilization are analyzed using DC power supply simulation and it is performed changing major influence on the design such as the number of installing absorber, internal resistance value, no-load voltage value at substation or operating parameters at regenerative energy utilization. After simulating, results are compared and analyzed.

• International Journal of Railway
• /
• 제3권3호
• /
• pp.90-94
• /
• 2010

In this paper, driving functions of the Korea High-speed Trains were decomposed based on systems engineering architecture. In order to analyze the driving function, various systems engineering tools and methods were used. Moreover, interfaces of decomposed driving functions were analyzed to figure out purposes of the driving functions. Through activity modeling of driving function of the Korea High-Speed Trains, main functions were derived when starting, speeding and stopping. When the high speed train is speeding, pre-departure checks and wheel slide prevention are essential driving activities for the safety and when the high speed train runs high speed, maintaining driving stability by monitoring bogie hunting and monitoring drivers' safe operation by vigilance systems is important. Furthermore, when the train is braking, the driver should checks brake and suspensions as safety actions.