• Asian Journal of Atmospheric Environment
• /
• v.10 no.4
• /
• pp.217-225
• /
• 2016

The purpose of the study was to initially investigate the concentration patterns of $PM_1$, $PM_{2.5}$ and $PM_{10}$ in the Seoul subway lines, and then to figure out the PM behaviors of internal and external sources inside subway tunnels. The PMs were monitored by a light scattering real-time monitor during winter (Jan. 8-26 in 2015) and summer (July 2-Aug. 7 in 2015) in tunnel air, in passenger cabin air, and in the ambient air. The daily average $PM_{10}$, $PM_{2.5}$, and $PM_1$ concentrations on these object lines were $101.3{\pm}38.4$, $81.5{\pm}30.2$, and $59.7{\pm}19.9{\mu}g/m^3$, respectively. On an average, the PM concentration was about 1.2 times higher in winter than in summer and about 1.5 times higher in underground tunnel sections than in ground sections. In this study, we also calculated extensively the average PM mass ratios for $PM_{2.5}/PM_{10}$, $PM_1/PM_{10}$, and $PM_1/PM_{2.5}$; for example, the range of $PM_{2.5}/PM_{10}$ ratio in tunnel air was 0.82-0.86 in underground tunnel air, while that was 0.48-0.68 in outdoor ground air. The ratio was much higher in tunnel air than in outdoor air and was always higher in summer than in winter in case of outdoor air. It seemed from the results that the in/out air quality as well as a proper amount of subway ventilation must be significant influence factors in terms of fine PM management and control for the tunnel air quality improvement.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.4
• /
• pp.300-307
• /
• 2016

The faults in railway vehicle components may result in either the stoppage of the service and the derailment of the vehicle. Therefore, it is important to diagnose and monitor the main components of a railway vehicle. The use of temperature is one of the basic methods for the diagnosis of abnormal conditions in the rotational components of a railway vehicle, such as bearings, reduction gears, brake discs, wheels and traction motors. In the present study, the diagnose of the rotational components using infrared thermography and a pattern recognition technique was carried out and a field test was performed. The results show that this method of diagnosis using infrared thermography can be used to identify abnormal conditions in rotational components of a railway vehicle.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.3
• /
• pp.283-289
• /
• 2015

In this study, the lightweight design of a brake bracket for a composite bogie was studied by considering two brake bracket models with thicknesses of 12t and 9t, respectively. For achieving this goal, finite element analysis and topology optimization were conducted. Firstly, the largest cross-sectional areas of the vertical and horizontal plates of the brake bracket were selected as the design variables. As the constraint, the Z-axis displacement of the brake bracket was increased by 2.5 units from the initial displacement value. The minimum volume fraction of the design regions was chosen as the objective function. The full model comprised a composite bogie frame and brackets attached together. However, to reduce the analysis time, 1D beam elements were used instead of the composite bogie frame by ensuring its equivalence with the full model. The result revealed that the weights of the 12t and 9t models of the brake bracket were reduced to 60 kg and 31 kg, respectively.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.3
• /
• pp.303-309
• /
• 2015

In this study, a vehicle dynamic analysis and roller rig test were performed to evaluate the applicability of a suspensionless composite bogie to railway vehicles. A vehicle dynamic analysis was carried out under different rubber bushing stiffness values. The stiffness of the rubber bushing that plays a role in guiding wheel sets was varied in the range of 10-100 MN/m, in 10-MN/m steps. Based on the results, the composite bogie with a rubber bushing stiffness of more than 40 MN/m satisfied the design requirements. In addition, a rubber bushing with a stiffness of 81 MN/m was fabricated, and a roller rig test was performed. Based on the test results, the vehicle equipped with the composite bogie had a critical speed of 363 km/h, which agreed with the simulation result within an error of 10%.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.4
• /
• pp.726-747
• /
• 2013

In order to support a large number of mobile stations (MSs) with statistical multiplexing in cellular networks, a random access scheme is widely used for uplink (UL) bandwidth request (BR). In the design of a random access based BR scheme, there are two important requirements: short connection delay and diverse Quality of Services (QoSs) support. Such requirements are crucial for IMT-Advanced systems like IEEE 802.16m to provide various types of fourth generation (4G) data services. IEEE 802.16m provides advanced UL BR schemes for non-real time polling service (nrtPS) and best-effort (BE) service to meet the requirements of short connection time and multiple QoS level support. In order to provide short connection time and multiple QoS support, three-step and differentiated BR procedures are adopted. In this paper, a novel modelling of IEEE 802.16m contention based BR scheme is proposed that uses a 2-dimensional discrete time Markov chain. Both the short access delay three-step BR procedures and normal five-step BR procedure are considered in the model. Our proposed model also incorporates the IEEE 802.16m differentiated BR procedure. With the proposed model, we extensively evaluate the performance of IEEE 802.16m BR for two different service classes by changing QoS parameters, such as backoff window size and BR timer. Computer simulations are performed to corroborate the accuracy of the proposed model for various operation scenarios. With the proposed model, accurate QoS parameter values can be derived for the IEEE 802.16m contention-based BR scheme.

• Journal of the Korean Society for Railway
• /
• v.13 no.2
• /
• pp.173-178
• /
• 2010

Electric railroad systems consist of supply system of electric power and electric locomotive. The electric locomotive is adapted to high speed driving and mass transportation due to obtaining high traction force. The electric locomotive is operated by motor blocks and traction motors. Train speed is controlled by suppling power from motor blocks to traction motors according to reference speed. Speed control of the electric locomotive is efficient by spending minimum energy between motor blocks and traction motors. Recently, induction motors have been used than DC and synchronized motors as traction motors. Speed control of induction motors are used by vector control techniques. In this paper, speed of the induction motor is controlled by using the vector control technique. Control system model is presented by using Simulink. Pulse is controlled by PI and hysteresis controller. IGBT inverter is used for real-time control and system performance is demonstrated by simulating the induction motor which has 210[kW] on the output power.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.653-661
• /
• 2017

This study compares and analyzes the operation costs of traditional and direct delivery strategies considering carbon emissions. For the determination of minimum operation costs and order quantity, we use the Economic Order Quantity (EOQ) model, which is the proper method for calculate the operation costs by logistics strategy. Using the classical EOQ model, we expand the EOQ model considering carbon emissions and domestic logistics environment. We conduct an empirical study on two agri-food logistics strategies under limitation of the carbon emissions using the expanded EOQ model. From the results of the empirical study, we find that the operation costs of direct delivery strategy are about 50% lower than those of the traditional strategy. Economic order quantity is also smaller than that of the traditional strategy. These results indicate that agri-food products can be transported quickly and freshly under direct delivery strategy. Consequently, considering carbon emissions, direct delivery logistics strategy are analyzed to have more positive effect on economic and environmental issues than existing logistics strategy. It is judged that direct strategy will also increase the freshness of agricultural products.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.6
• /
• pp.2866-2871
• /
• 2011

In this study, computation method of tensile load which develops in tie-bar of reinforced earth, connection strength between tie-bar and eco-block and shear strength of the interface between two eco-blocks were verified by experiments. According to the test results of connection strength test, peak tensile load of D13 deformed bar were close to allowable tensile load of it for situation of infill with soil. Connection strengths of D10 and D13 deformed bars were greater than the allowable tensile load of those respectively for situation of infill with concrete. According to the test results of shear strength of the interface between two eco-blocks, shear resistance parameters, ${\alpha}_u$ and ��${\lambda}_u$ were evaluated as 1.7kN/m and 2$27.6^{\circ}$ respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.10
• /
• pp.2907-2916
• /
• 2009

PPPs(Public Private Partnerships) in Korea was introduced in 1990s, which mainly used for providing transportation facilities such as railroad and high-way. Since 2005, a service delivery type PPPs, in other words BTL(Build Transfer Lease) has been implemented, which focused on social infra-structure including school, military housing, and sewage facilities. According to previous literature, efficient risk evaluation and management is the key factor for successful PPPs in the UK and Australia. However, Korea doesn't have proper risk evaluation system for PPP type project. In this paper, we explore and analyze risk evaluation system of PPPs in Korea and other countries. Also, we apply empirical methodology used in the UK to a BTL project and set up a new PSC(Public Sector Comparator) with risk evaluation.

• Journal of Advanced Navigation Technology
• /
• v.20 no.3
• /
• pp.252-257
• /
• 2016

In this paper a novel access scheme for uplink multiuser transmission based on IEEE 802.11ax random access in in-aircraft wireless sensor networks is proposed. The proposed scheme provides an efficient access control mechanism with three divisions of OFDMA backoff counter (OBO): access, deferring, dropping, which controls the number of potential uplink transmission stations. The proposed scheme can be used efficiently in in-aircraft wireless sensor network where a large number of sensors need to be supported. By using the proposed scheme, since in-aircraft sensors attempt channel access using the proposed differentiated OBO parameters, the number of stations exceeds the access capacity can be efficiently controlled. This paper also provides the mathematical analysis of the proposed scheme, regarding the optimal parameters. According to the performance analysis, the proposed scheme is able to efficiently control the access behavior of wireless sensors in the network.