• Journal of the Korean Society for Railway
• /
• v.19 no.1
• /
• pp.87-96
• /
• 2016

The multinomial logit model, based on random utility maximization (RUM) theory, has been the predominant model used in travel mode choice contexts. In this paper, the travel mode choice model based on random regret minimization (RRM) theory is proposed as an alternative to the RUM model, and the applicability of the RRM model is examined. The presented model is applied to the case of inter-city travel mode choice in Korea. The empirical results show that the RUM model and RRM model have parameters that are consistent with the intuition. The goodness of fit statistics in the RRM model improved compared with the results of the RUM model. Consequently, these results show the possibility of using the RRM model in the context of travel mode choice.

• Journal of the Korean Society for Railway
• /
• v.18 no.3
• /
• pp.212-222
• /
• 2015

The characteristics of noise emission from tram systems should be investigated in order to design and construct an urban tram network that raises fewer environmental noise problems. In this paper, the characteristics of rolling noise from a tram were studied and a desired stiffness of the rail supports was proposed using a noise prediction model. The mobilities of embedded rails and resilient wheels were predicted using the Timoshenko beam model and the finite element model, respectively. The predicted mobilities were compared with the measured results. Compared with the measured values, the calculated noise level near the track showed small errors for frequencies higher than 300 Hz. Then, the source strengths of rail and wheel components were examined by varying the rail supporting stiffness and the slab supporting stiffness so that suitable stiffness values could be estimated that would reduce noise radiated from rails and wheels but that would not greatly increase the ground vibration.

• Journal of the Korean Society for Railway
• /
• v.16 no.6
• /
• pp.492-502
• /
• 2013

This paper analyzes the outcomes of railway reform in the form of vertical separation between the infrastructure and operation since 2004 in Korea. For the analysis, the paper reviewed theoretical issues and case studies of European and Japanese railway reforms efforts. By doing this, we find the implications and a standard model, most useful. Moreover, based on this analysis, the paper reviewed the status of the accomplishment of goals, including solution to current account deficits, improvements in competitiveness and greater efficiency of operations. Finally, the paper highlighted improvement measures to address the problems of railway vertical separation in Korea. This paper suggests specifications pertaining to rail policy and control methods; tower foundation and negotiations and mentions ways to establish legal institutionalization and to secure stable rail system investments in railway in Korea.

• Journal of the Korean Society for Railway
• /
• v.20 no.2
• /
• pp.196-202
• /
• 2017

A very long test track is required for high-speed operation test of the real-scale Linear Synchronous Motor (LSM) for ultra-high-speed trains. The required length results in huge construction cost and economic loss if any error occurs during development. Therefore, validation study of the LSM design technology using a low-cost small-scale model must be carried out in the early research stages. It is possible to deduce an optimal winding method for the armature and determine the mechanical properties of the LSM through a performance tester that applies a rotary-type small-scale LSM model. In addition, it is possible to utilize previous research on LSM control systems. Therefore, a basic design model, comprising a rotary-type LSM tester that meets the requirements for the propulsion of 600km/h-class ultra-high-speed trains, is derived in this study. Finally, an optimal model, which has a stable structure under the condition of 1500rpm or more high-speed rotation, is derived by electromagnetic and mechanical stiffness analysis.

• Environmental Engineering Research
• /
• v.24 no.4
• /
• pp.680-689
• /
• 2019

Temperature effects on the generation of brake wear particles from railway vehicles were generated, with a particular focus on the generation of ultrafine particles. A real scale brake dynamometer test was repeated five times under low and high initial temperatures of brake discs, respectively, to obtain generalized results. Size distributions and temporal patterns of wear particles were analyzed through visualization using clustered heatmaps. Our results indicate that high initial temperature conditions promote the generation of ultrafine particles. While particle concentration peaked within the range of fine sized particles under both low and high initial temperature, an additional peak occurred within the range of ultrafine sized particles only under high initial temperature. The timing of peak occurrence also differed between low and high initial temperature conditions. Under low initial temperature fine sized particles were generated intensively at the latter end of braking, whereas under high initial temperature both fine and ultrafine particles were generated more dispersedly along the braking period. The clustered correlation heatmap divided particle sizes into two groups, within which generation timing and concentration of particles were similar. The cut-off point between the two groups was approximately 100 nm, confirming that the governing mechanisms for the generation of fine particles and ultrafine particles are different.

• Journal of the Korea Society for Simulation
• /
• v.20 no.1
• /
• pp.9-18
• /
• 2011

Recently, in the era of low carbon and green growth, the importance of railway transportation is being emphasized However, there is a lack of research on simulation for railway depot. This paper presents the development of the dynamic simulator for LRT(Light Rail Transit) depot. This study presents explanations of requirement analysis, architecture, database design, simulation algorithm, and design and development of the simulation tool. The dynamic LRT depot simulation tool consists of four modules; a Network Editor to create and modify information regarding railroad, train, signal, turnout, job and station, a Simulator to calculate train movement algorithm, a Reporter to show simulation results in table and graphs, and an Animator to animate simulation results dynamically. It is hoped that this study on general details of structure, design and development of LRT depot dynamic simulator will perform as a good reference to future development of new simulation tools.

• Journal of the Korean Society for Railway
• /
• v.18 no.4
• /
• pp.374-390
• /
• 2015

This research shows the relationship between the number of trains and the probability of trains with arrival delay and suggests way to estimate the benefits of improved punctuality in a bottleneck section of the Gyeongbu Line. The arrival delays of high-speed and conventional trains were estimated using the train operation data of KORAIL. Linear regression models for the probability of trains with arrival delay by train type are presented in this paper. The probabilities of trains with arrival delay were more affected by the number of conventional trains than by the number of high-speed rail trains. For the empirical analysis, a project for increasing the capacity in the Seoul~Geumcheongu office section was tested. The benefits of the improved punctuality were estimated to be 4.2~4.5 billion Korean won every year. This research has some limitations but it can help evaluate more precisely the feasibility of the project of increasing the capacity in bottleneck sections.

• Journal of the Korean Society for Railway
• /
• v.18 no.4
• /
• pp.391-400
• /
• 2015

This research used a survey of 350 staff members working at Korail with the purpose of analyzing influence factors for the railway tourism policy for job satisfaction; results were presented for the proposed factor. First, we selected the influence factor through precedent research related to the railway tourism policy. Second, the selected influence factor and the extent of satisfaction were used to determine whether or not any kind of difference existed according to individual attributes of the railway employees. Finally, we analyzed what the influence factor was between the category factor and the sub-category factor. In conclusion, it was found that government subsidy had a meaningful correlation with infrastructure expansion and the improvement of the railway business as it is connected to tourism efficiency. Human resources have a meaningful correlation with the needs of educational institutions and the retaining of talent. Railway tourism production has a meaningful correlation with railway tour production as it is conducted to satisfy tourists and the consortium. The shift of viewpoint has a meaningful correlation with the escape from the peace-at-any price principle and demand forecasting.

• Journal of the Korean Society for Railway
• /
• v.19 no.5
• /
• pp.609-616
• /
• 2016

The Passenger Service Equipment(PSE) provide various train operation data such as flag station data. When PSE incur service failures or errors, passengers who use the train feel great inconvenience. In this paper, I have chosen PSE that were important to passengers and have applied Reliability Centered Maintenance(RCM), deviating from the existing perspective that operators have taken to perform RCM. FMEA/FMECA was performed for reliability analysis of the PSE. The highly critical device among the PSE is defined as the Passenger Information Control System(PICS), which is used to control the automatic announcement and signaling board. Through Weibull distribution of the PICS, failure analysis was performed. Based on the analyzed results, I have proposed a solution that will minimize service failure of PICS.

• Journal of the Korean Society for Railway
• /
• v.20 no.4
• /
• pp.466-473
• /
• 2017

Recently, domestic railway related institutes are developing pantographs for high speed trains; to lighten the upper arm, this device has a composite structure of CFRP (Carbon Fiber Reinforced Plastic) and aluminum instead of conventional steel. In the case of KTX-Sancheon, the pantograph must have a large current capacity because this system is of power-car type, supplying all necessary power for the train through a single pantograph. If the thickness of the pipe is arbitrarily increased in order to increase the current carrying capacity, without analyzing the thermal characteristics of the aluminum pipe, the increase in the weight of the upper arm may cause degradation of the current collecting performance. Therefore, in this paper, using the thermal analysis technique, we analyze the temperature change characteristics of the aluminum pipe of the upper arm over time, while receiving power at the stationary state of the KTX-Sancheon; we also examine the adequacy of the minimum thickness of the aluminum pipe in accordance with the proposed pantograph flow capacity.