• 제목/요약/키워드: Railroad site

검색결과 140건 처리시간 0.029초

시공여건을 반영한 TBM선정 방법에 대한 연구 (Study on the selection of TBM in consideration of field conditions)

  • 오준근;사공명
    • 한국터널지하공간학회 논문집
    • /
    • 제16권2호
    • /
    • pp.125-133
    • /
    • 2014
  • 본 연구에서는 지반 및 현장조건을 고려한 TBM 선정방법을 제시하였다. 지반, 환경, 가격조건별로 TBM 선정에 영향을 미치는 인자와 굴착장비를 선정 분류 하였다. 선정된 영향인자와 장비 간 가중치를 AHP기법을 적용하여 산정하였다. 선정된 영향인자의 분석결과 기본요소에서는 지반조건이 가장 중요한 영향요소로 확인되었으며, 세부요소로서 암반조건에서는 강도, 토사지반조건에서는 수압이 가장 중요한 인자로 확인되었다. 주변 환경조건에서는 시공성에 영향을 줄 수 있는 주변구조물 인접여부가 중요한 인자로 확인되었다. 마지막으로 도출된 각 영향인자별 가중치를 토대로 굴착현장에 적용 가능한 TBM을 선정하고 도출결과와 실제 현장에 적용된 장비의 비교를 통하여 본 연구에서 제안하는 방법에 대한 검증이 이루어 졌다.

전기철도 급전계통의 고조파 억제용 RC뱅크의 적정 위치에 관한 연구 (Optimal Location of RC bank limiting Harmonics in Electric Railway System)

  • 이한민;오광해;창상훈
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 하계학술대회 논문집 B
    • /
    • pp.1254-1256
    • /
    • 2001
  • This paper composes the Electric Railway System with the common grounding based on the 5-port network model. We compare the magnification ratio of harmonic currents according to locations of RC bank(i.e s/s. sp, and pp). It takes a lot of costs to equip the RC-bank at all location. And it is NOT effective that RC-bank is equipped at S/S. Finally, this paper proposes SP as the optimal site of RC-bank aspect reducing harmonic.

  • PDF

반복재하 하중을 받는 철도노반재료의 강우에 따른 침하 특성 (The Characteristics of Settlement on the Roadbed Reinforcement Materials of Cyclic Loading with a Falling Water)

  • 황선근;최찬용;이진욱;오상덕
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2001년도 추계학술대회 논문집
    • /
    • pp.562-567
    • /
    • 2001
  • In this study, performance of reinforced railroad roadbeds with the slag(HMS-25) and soil were investigated through the real scale railroad roadbed tests. Several real scale reinforced railroad roadbeds were constructed in the laboratory with different subgrade conditions and were tested with the estimated actual train loads including the impact loading of train. The affecting factors such as plastic & elastic settlement roadbed layers as well as surface of rails were measured. The settlement at rail surface and roadbed surface of case of soil and slag roadbed comparative with good roadbed site were 2.3, 5.7 times and 1.9, 1.6 times, respectively.

  • PDF

호남고속철도 4-2공구 교량 계획 및 설계 (Planning and Design of Honam High-Speed Railroad's Bridges)

  • 배민혁;우동인;조현;안광수;한녹희
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2010년도 춘계학술대회 논문집
    • /
    • pp.1470-1477
    • /
    • 2010
  • In 2004, Korea has become the world's fifth-express train states, Honam high-speed railroad which goes down another line with existing Kyoungbu high-speed railroad is divided 19 construction sectors, its total length is 230.9 km and it will be constructed by 2017. This site is located in Jeollabukdo Jeong-eup district along 9.38 km. There are three representative bridges. ;One is the PSC box girder bridge, another is the Extradosed bridge, and the other is the three continuous spans half-through hybrid arch bridge. This paper shows a planning and design of these bridges.

  • PDF

현장 궤도 동특성 추정에 관한 연구 (A Study on Dynamic Properties Estimation of On-Site Railroad Track)

  • 이희현;남보현;박용진;이종득
    • 한국철도학회논문집
    • /
    • 제4권2호
    • /
    • pp.39-46
    • /
    • 2001
  • In this paper, train running test and lateral resistant force test are conducted before and after sprinkling the ballast stabilizer in order to investigate the dynamic behaviors and parameters of the railroad track. The measured results are used to confirm the effect of the stabilizer and to validate the numerical results. From this paper, it is known that the stabilizer used in this study has excellent effect on increasing the vertical rigidity and the lateral resistance, and some correction factors should be considered on masses and rigidities of the track components in order to calculate the vibration magnitude reasonably due to running train.

  • PDF

성토 구간 지반 응답을 고려한 열차 내 지진 감지 기술 개발 연구 (A Study on a Seismic Detection Technology for High-speed Railway Considering Site Response Characteristics)

  • 유민택;문재상;박병선;유병수
    • 한국지반공학회논문집
    • /
    • 제36권10호
    • /
    • pp.41-56
    • /
    • 2020
  • 지진 경보 시스템이 빠르고 정확하게 가동하기 위해서는 충분한 수량의 계측 시스템 확보와 더불어서 적절한 계측 데이터 해석기술 개발이 요구된다. 신규 지진계를 설치시 많은 비용이 소모되기 때문에, 열차 내 가속도계 등을 대체재로 지진 경보 시스템에 활용하는 것이 효율적이다. 그러나 열차에 설치된 가속도계의 경우, 지진계와는 달리 열차 주행시 진동 데이터가 포함되어 있다. 또한, 지진 발생시 성토구간에 의해서 변화된 지진응답을 계측하게 된다. 본 연구에서는 위의 특성들이 포함된 열차 가속도계 데이터에 기반한 지진감지 기술을 제안하고자 한다. 우선, 성토구간의 지진응답 해석기법을 활용하여 열차가 성토구간을 지날 때 지진이 발생하는 것을 구현한 가상의 열차 가속도 데이터를 구축하였다. 구축한 가속도 데이터를 Short time Fourier Transform(STFT)와 Wavelet Transform(WT)을 활용하여 시간-주파수 분석을 수행하였다. 분석 결과, STFT가 장주기 지진 감지에 적합한 반면, WT의 경우 단주기 지진 감지에 유용함을 확인하였다.

철도 차량기지의 토양오염 실태 조사 (Investigation of Soil Pollution Status for Railroad Depot)

  • 어성욱;이태규
    • 한국철도학회논문집
    • /
    • 제12권5호
    • /
    • pp.788-792
    • /
    • 2009
  • 철도는 그동안 친환경 교통수단으로 알려져 왔다. 그러나 토양환경보전법 제정 이전 수십 년간 인지하지 못하는 토양오염들이 철도 시설 부지에서 유발되어 왔다. 철도차량기지 등에서는 철도차량 유지관리 및 수선을 위해 사용되어진 많은 폐기물과 유기용제들이 부지 내에 투기되어온 것들이 사실이다. 이들 부지의 개발과 활용을 위해서는 과거의 오염지역에 대한 정차가 선결되어야 하는데, 본 연구는 차량기지의 토양 오염현황과 복원 대책을 제안하기 위해 수행되어 졌다. 차량기지 내 폐기물 투기 지역에서는 유류오염물질인 TPH 성분과 몇몇 중금속 성분이 토양오염 기준치를 초과하는 것으로 나타났으며, 기지 내 선로와 분기기에 대한 조사에서는 분기기 하부에서 유류오염물질이 관측되었다. 원위치, 또는 굴착 후 정차 등의 방법이 오염정화를 위해 적용되어질 수 있으며, 현장의 특성을 고려하고, 모의시험을 통해 적절한 정화 방법을 채택할 경우 현장의 오염정화를 완성할 수 있을 것이다.

철도근로자 작업복 기능성향상을 위한 연구 - 착의평가를 중심으로 - (A Study on the Functional Improvement of Work Clothes for Railroad Workers - Focused on Wearing Evaluation -)

  • 하선주;최혜선;김은경
    • 복식
    • /
    • 제58권7호
    • /
    • pp.43-59
    • /
    • 2008
  • This study aims to improve the uniform functionality of the workers who work in Electric Technology Division, Korea Railroad Corporation. Former study of questionnaire survey was taken to examine the current state of wearing working clothes for the workers. Based on the results of the former study, an experimental clothes, the functionality of which has improved in terms of design, materials, and patterns, was created, and existing working clothes and the treated experimental clothes were compared through simulation wearing evaluation comprising appearance, activity adaptability, quantitativeness, and on-site adaptability evaluation comprising appearance and activity adaptability. The followings are the results of the study: Simulation wearing evaluation is composed of 5subjects and 11experts specializing in costume, and as a result of evaluation the experimental clothes were evaluated superior to the existing working clothes in all items. On-site adaptability evaluation was conducted by workers in the Electric Technology Division, who are the subjects in this study. In that evaluation, the experimental clothes were also evaluated superior to the existing working clothes in all items. While the five subjects who participated in the simulation wearing evaluation move, the quantitative evaluation measured the distance of location transfer of the back length in the jacket and the distance of location transfer of the back waist in the trousers. As the distances in the experimental clothes were measured shorter than the distances in the existing working clothes, the subjective evaluation results are objectively supported.

철도신호시스템 상호운용성 검증 방법 및 지원도구의 개발 (Interoperability Test and Testing Tool for Railway Signaling System)

  • 황종규;조현정;백종현
    • 한국산학기술학회논문지
    • /
    • 제16권9호
    • /
    • pp.5802-5809
    • /
    • 2015
  • 철도신호시스템은 열차의 운행을 책임지는 바이탈한 제어장치로서, 실제 사용 전에 충분한 시험을 통해 그 기능 안전성이 검증되어야 한다. 지금까지는 대부분 실험실에서 시뮬레이터에 의한 개발한 철도신호시스템의 검증을 수행 후 철도현장에 설치하여 다른 장치와 운용성 테스팅 단계를 거치게 된다. 이러한 접근방법은 일부 제한된 범위에서 상호운용성이 검증되고 있어, 보다 체계적인 상호 운용성 검증이 요구되고 있다. 본 논문에서는 철도신호시스템의 상호운용성 검증을 위한 단계를 3단계로 제시하고, 각 단계별 검증 방법을 설명한다. 또한 최종단계인 3단계에 적용을 위한 시험방법 및 테스팅 도구를 제안하였다.

토공현장 적용성 검증을 위한 MMS 정밀도 분석 (MMS Accuracy Analysis for Earthwork Site Application)

  • 박재우;김석
    • 한국산업융합학회 논문집
    • /
    • 제22권2호
    • /
    • pp.183-189
    • /
    • 2019
  • Researches utilizing the fourth industrial revolution technology are being conducted as a breakthrough for improving the earthworker productivity. In order to make the earthwork site smarter, it is necessary to digitize the construction site topography at first. For this purpose, photogrammetry using drones and LiDAR on MMS have been recently used. The purpose of this study is to analyze the accuracy of LiDAR by installation angles for verifying the application of MMS in the construction site. As a result of comparing the coordinates measured by the total station and the LiDAR, a small error of about 1-2 centimeters was shown. It is confirmed that MMS could be well applied to the earthwork site. In addition, there was no significant difference in the accuracy of the acquired coordinates according to the installation angle of the LiDAR, but the shape of the point clouds was different. The larger the installation angle, the better the shape of the site terrain is measured.