• Journal of the Korean Society for Railway
• /
• v.16 no.6
• /
• pp.510-518
• /
• 2013

These days, interest in radio networks for railways has increased both at home and abroad. In response to this trend, not only the existing radio networks which focus on railway control signals but also the next-generation integrated radio network that can send videos and manage mass storage data are actively being investigated. This paper proposes wireless communication methods to establish integrated radio networks for railways. The paper further suggests a candidate frequency band that could be allocated as the frequency band for railways among the frequency bands currently used in Korea. Based on this paper, we can expect that the domestic railroad will operate more efficiently and that security and convenience of the railroad will reach a superior level. In addition, the Korean integrated radio networks for railways, which cope with the changes in the global technology market, will be established.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.354-357
• /
• 2004

According to the computerization of railway signaling systems, the interface link between the signaling systems has been replaced by the digital communication channel. At the same time, the importance of the communication link is more pronounced than in the past. In this paper, new network-based protocol for Korean railway signaling has designed between CTC and SCADA system, and the overview of designed protocol is briefly represented. Using the informal method for specifying the communication protocol, a little ambiguity may be contained in the protocol. To clear the ambiguity contained in the designed protocol, we use LTS model to design the protocol for this interface link between CTC and SCADA, the LTS is an intermediate model for encoding the operational behavior of processes. And then, we verify automatically and formally the safety and the liveness properties through the model checking method. Especially, the modal ${\mu}$-calculus, which is a highly expressive method of temporal logic that has been applied to the model checking method. It will be expected to increase the safety, reliability and efficiency of maintenance of the signaling systems by using the designed protocol for railway signaling in Korea.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.11
• /
• pp.193-201
• /
• 2018

In this paper, we extracted relevant patent data and conducted statistical analysis to understand the technical development trend related to Wireless Power Transfer (WPT) for Light Rail Transit (LRT). Recently, with the development of WPT technologies, the Light Rail Transit (LRT) industry is concentrating on applying WPT to the power supply system of trains because of their advantages compared wired counterpart, such as low maintenance cost and high stability. This technology is divided into three areas: wireless feeding and collecting technology, high-frequency power converter technology and orbital and infrastructure technology. From each specific area, key words in patent document were extracted by TF-IDF method and analyzed by social network. In the keyword network, core word of each specific technology were extracted according to their degree centrality. Then, the multi-word phrases were also built to represent the concept of core technologies. Finally, based on the analysis results, the development strategies for each specifics technical area of WPT in LRT filed will be provided.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.3
• /
• pp.467-473
• /
• 2018

R-Bar(Overhead Rigid Conductor system) is being developed for the high-speed in Europe because it has an advantage of cross section area reduction of tunnel compared with OCS (Overhead Catenary Line). Because there are lots of underground sections and mountains in korea, it is necessary to develop the R-Bar for a high-speed line. In this study, a method on speed-up of transition section between OCS and R-Bar is proposed. The commercial program, DAFUL, is used to predict a dynamic characteristics between Overhead Line and pantograph. The program is evaluated according to EN 50318 which is the European Norm for evaluation of the program. Using the evaluated modeling and method, a method for the max. speed of 250 km/h of transition section is proposed.

• Journal of Distribution Science
• /
• v.15 no.4
• /
• pp.25-32
• /
• 2017

Purpose - The introduction and expansion of the railway network since the 19th century brought revolutionary changes in economic activities, performance, and structure. The purpose of this study is estimating the impact of railroads on the local agricultural and manufacturing structures in the 19th century USA. Research design, data, and methodology - To identify the impact of railroads on local economic structure, county-level panel data from the U.S. census were analyzed using a panel fixed-effect differences-in-differences regression. The empirical investigation focuses on whether railroads changed the overall volume and sectoral composition of the local agricultural sector, and whether they contributed to the growth of the local manufacturing industry and its productivity. Results - The railroad introduction led to the relative decline of the agricultural sector, while encouraging the growth of market-oriented gardening. As such, manufacturing productivity increased by the introduction of railroads, although manufacturing inputs and home manufactures were unaffected. Conclusions - The findings imply that railroads contributed to the growth of market-oriented farming in rural areas, and the rise of productivity in the local manufacturing sector. Meanwhile, evidence of railroad-driven growth for the entire agricultural sector or a massive reallocation of resources from agriculture to manufacturing were not found.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.3
• /
• pp.1-8
• /
• 2011

The overall goal of a safety based railroad system is either to eliminate hazards in designing or to minimize the possibility of it. In order to indicate system safety or low risk although it may not be possible to achieve zero risk conditions, first, it shall ensure that any disasters would occur due to system operation because the prescribed specifications are properly fulfilled and there are no failures of any kind. Second, the risk of faults or failures leading to a mishap must be eliminated or minimized by using fault-tolerance or fail-safe procedures. This paper will attempt to summarize the personal and social risk criterion at widely scattered points, presently used as a safety approach in all over EU, in order to establish the step by step procedures of the detailed standard for railway facilities. In addition, we present the new safety analysis method using the SIL-based evaluation standard and the Reachability Graph of the Petri Net.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1300-1302
• /
• 2003

CCTV network has been implemented to transmit the image information of platform, ticket gate and transfer section to local headquarters in the KNR(Korean National Railroad). But, communication system for transferring image information around accident field or wayside has not been established yet. thus, at present implementation of communication equipment is necessary for dynamic image of unspecified accident to be transmitted to headquarters. Copper cable communication network is run by KNR, but it is processing installation of optical cable in connection with the implemental plan for high-speed network from now on. And, the capacity of communication channel will be guaranteed much more than now between station and station, station and central headquarters when optical cable is completed. This study analyzes the image equipment of field for transmission and estimated matters to transmit image information of accident field to headquarters with using communication infrastructure. And, the study considers implemental method of communication network for long-distance image transmission from dozens to hundreds kilometers.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.2192-2193
• /
• 2011

VCU(Vehicle Control Unit) was developed to decrease the wire weight and make it easy to control the power of ECU in bimodal tram. VCU consists of CC(Central Computer), DU(Display Unit), TU(Terminal Unit) with PCB. CC is a main controller with progamming and DU displays the status with graphic symbols and letters. TU with PCB inputs and output the voltage controlled by CC. They communicate with CAN(Controller Area Network). VCU had been verified with software reliability verification test and environmental hardware test. This paper has shown the test results and application to bimodal tram.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.2210-2211
• /
• 2011

Load capacity varies according to a day of the week in traction power supply system, because time schedule in railway is changed as demand for passengers and freights. Therefore, Voltage drop also varies as load capacity. In Korea railway, Voltage collected from catenary in train is decreased, as load supplied traction power supply system is increased. Therefore, investigation about voltage drop should be performed, before development of countermeasure against voltage drop. The investigation can be performed by simulation or field test. Naturally, field test is more precise than simulation. In addition, field test should be carried out at peak load. This paper presents test and analysis about voltage drop in railway. The test is performed in both a day of the week and weekend. The analysis is figured out comparison load capacity between two days and voltage drop across terminal.

• Journal of the Korean Society of Systems Engineering
• /
• v.9 no.2
• /
• pp.91-97
• /
• 2013

Recently, the Korean Railroad have been operating separately by Korea Rail Network and the Korail since 2005. In addition, because of the lack of government's social overhead capital, New railway projects have been built and operated by private investors which don't have railway operating experience. Therefore, systems engineering management is needed from the initial planning stage to the construction and the opening. In this paper, structural features were considered according to the separation of Daegok-Sosa-Wonsi Private Finance Initiative (Daegok-Sosa, Sosa-wonsi) and the operating agency's unification(Daegok - Sosa business operations). And based on the domestic system engineering applications, System-Engineering Implementation was studied.