• Journal of the Korean Society for Railway
• /
• v.10 no.5
• /
• pp.582-588
• /
• 2007

Since the turnout system in railroad restricts the train speed, the KNR (Korean National Railroad) provides the specification for the speed (130km/h) of the train when the train passes the turnout system. Therefore, the turnout system in pre-existing railroad is necessary to be improved to speed-up for the train. In this study, the dynamic wheel-load field tests have been performed to evaluate the track performance and the roadbed bearing capacity has been examined using numerical analysis at the turnout crossing in the conventional and improved turnout system. The impact factor is estimated using the data sets achieved from the dynamic wheel-load field tests in the conventional and improved turnout system. The stress acting on the roadbed for the improved turnout system is substantially decreased compare to that for the conventional turnout system.

• Journal of Korean Society of Transportation
• /
• v.12 no.1
• /
• pp.5-24
• /
• 1994

The purpose of this study is to develop an accident hazard index model in order to be used for the evaluation of regional traffic safety and to develop a driver violation index model in order to identify the primary causes of traffic accidents. The accident hazard index model was developed considering the accident rates based on population and the vehicle registration. The driver violation index model was developed considering the accident rates of each item of driver violation. Using the models developed in this study, it is identified that in the provincial level analysis the degree of the traffic safety of Chungbuk, Chungnam, and Kyungbuk Province are evaluated to be low. In the county level analysis of Kyungnam Province, the degree of the traffic safety of Yangsan, Euirung, Haman, Sachun and Tongyung County are evaluated to be low. Also, it is found that the major driver violations causing accidents in the nation are driving by unlicensed drives, improper passing, and improper railroad crossing : in Kyungnam Province, improper passing is the most driver violation.

• Proceedings of the KSR Conference
• /
• 2001.10a
• /
• pp.540-545
• /
• 2001

When a testing body is being inserted to the ground by Front Jacking Method, the influence of friction forces around the body plays important role in the characteristics of whole ground behavior. In the study, the Front Jacking Method that most frequently used in Korea who applied with experimental way. And the characteristics of ground behavior that caused by the friction that acts to the upper slab was analysed for the basic data that can be utilized for real scale experiment.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.159-163
• /
• 2004

The KNR(Korean National Railroad) has a speed limit regulation(130km/h) for the train passing the turnout to guarantee a safety. Since that speed is set as below the maximum commercial speed(140km/h), it has been regarded as a major factor to obstacle the total efficiency. The crossing rail part of the turnout system is formed into a antisymmetric, furthermore, there are several discontinuous part. Thus, measuring the strain signals of this part is impossible actually and it must be in the most difficult work related the turnout research. In this research, the program that can anticipate the signals at the various conditions with considering its own shape was developed and the preciousness of its results had been examined by comparing analyzed and measured ones at the other parts. The simulation was performed with varying the factors such as train speed and contact depth. As a results, it was proved that the regulation was not useless and very important guide at least up to now.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.977-981
• /
• 2004

Variety of recent railroad markets arouses the need for steel sleepers. Steel sleepers have many advantages over conventional timber or PC sleepers with respect to safety, environment and economical efficiency due to less effort for maintenance. Weak points of timber sleepers are to cut trees and apply toxic creosote as well as to need frequent maintenances while it is difficult to apply PC sleepers to steel bridge or crossing and to recycle them completely. In this paper, technical trends are analyzed in order to develop suitable steel sleepers for domestic railroads.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1579-1582
• /
• 2005

철도 운전사고의 대부분을 차지하는 철도건널목에 대한 기존의 사고예측식은 국외의 경우 Peabody Dimmick Formula, New Hampshire Index, National Cooperative Highway Research Program(NCHRP) report 50, U.S. Department of Transportation(DOT) 사고예측식 등을 이용하고 있었으며, 국내의 경우, U.S. DOT 사고예측식의 입력변수를 다변량 분석법을 이용하여 국내에 맞게 조정한 사고예측식을 이용하고 있다. 그러나 위에서 제시한 철도건널목 사고예측식은 철도건널목에서 발생하는 사고를 단순히 철도통행량, 도로통행량, 선로수, 도로수 등의 요인에 국한하여 분석한 것이고, 사고예측식 자체가 철도건널목에만 국한된다는 맹점을 안고 있어서 철도건널목장치라든지 철도건널목을 이용하는 사람들의 성향 등, 여러 인자를 고려한 철도건널목에서의 안전성분석 및 대책을 제시할 필요가 있다. 본 논문에서는 철도건널목장치를 포함하여 다른 시스템에도 범용적으로 적용할 수 있고, 제한된 변수에만 국한하지 않아 여러 사항을 고려할 수 있는 안전성분석 절차를 제시하였는데 이 안전성 분석 절차를 철도건널목에 적용함으로써 시스템의 위험요인을 분석하고, 이에 대한 원인 및 결과, 손실을 도출한 후 대책을 제시할 수 있었다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2023.07a
• /
• pp.237-240
• /
• 2023

본 논문은 철도 건널목(교차로)에서 발생하는 차량, 보행자 및 야생 동물 사고 등의 상황에서 발생하는 위험 요소를 설정하고 철도 건널목(교차로)의 운행상황을 확인할 수 있도록 모형 철도 주변에 유형별 센서들을 설치하고 데이터를 인지하여 시스템에 저장하고, 유효한 데이터 분석을 통해 Orange3 머신러닝 기법을 적용한다. 철도 건널목에 관련된 이미지 중 위험인자로서 차량, 보행자 및 야생동물등의 객체를 감지하고 데이터를 수집하여 활용한다. 또한 이러한 데이터들은 이용자 상황에 맞는 철도 데이터 운영 시스템으로 적용할 수 있도록 위험 예측 시스템을 제안한다.

• Journal of Korean Society of Transportation
• /
• v.25 no.2 s.95
• /
• pp.17-26
• /
• 2007

Because the prime objective of the current preemption methods at signalized intersections near highway-railroad grade crossings(IHRGCs) is to clear the crossing, secondary objectives such as safe pedestrian crossing time and minimized delay often are given less consideration or are ignored completely during the preemption. Under certain circumstances state-of-the-practice traffic signal preemption strategies may cause serious pedestrian safety and efficiency problems at IHRGCs. An improved transition preemption strategy(ITPS) that is specifically designed to improve intersection performance while maintaining or improving the current level of safety was developed by Cho and Rilett. Even if the new transition preemption strategy improved both the safety and efficiency of IHRGCs, the performance of the strategy is affected by train speed. Understanding the impact of this factor is essential in order to implement ITPS. In this paper, the effects of train speed were analyzed using a VISSIM simulation model which was calibrated to field conditions. It was concluded that the delay is affected more by train speed than the transitional preemption strategy and the safety of the intersection is not affected by train speed once an advanced preemption warning time(APWT) is equal to or greater than 90 seconds.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.4
• /
• pp.331-339
• /
• 2019

Recently, expansion of urban and social infrastructures is planned to go through the transfer of military facilities or crossing the infrastructures via underground tunnels. However, when crossing facilities such as ammunition and explosive storages, a high level of safety assessment is required to prevent an accidental explosion of ground ammunition. In this study, a case study was conducted to evaluate the effect of blasting for the construction of tunnel on the ground ammunition facilities. The design section of Sinansan train operated by the Korea Railroad Authority with agreement of the Ministry of National Defense was selected. For the purpose of this study, the vibration velocity due to explosion was predicted by using GTS-NX, a numerical analysis program. Through literature review, it was confirmed that the vibration velocity of 0.2cm/sec can be a safety evaluation standard. These safety evaluation indicators and procedures used in this study can be utilized as an index of safety evaluation in the planning of social infrastructures that cross the ammunition facilities in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.6214-6220
• /
• 2015

A track circuit has used stably more than 100 years for detecting train position, but solution of track circuit sort circuit incapacity due to a rust is necessary for side line in station yard, coast line and level crossing for conventional line in rural line. Domestically, Axle Counter System(ACS) has partially used for Hot Box System for high speed line and turnout for CBTC system. In contrast, most of countries has used ACS not only trunk line but also rural line and its application has increased for metro, electric car and industrial railway. In this paper, we has verified the operating status of ACS which installed with existing track circuit through log analsis to implement pilot application in mail track and turnout in station yard. And interface test with interlocking system has conducted at Obong shunting yard, as well as Cheongju station and has analyzed test result. Based on a test result, we made fail safe design, manufacturing skill and established system requirement specification for the smooth operation and maintenance.