• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.1187-1192
• /
• 2003

The railroad noise has been considered as one of environment pollution and complaints about it have been increasing every you. Therefore, the establishment of railroad noise monitoring network is necessary. It will be designed for monitoring railroad noise, storing data of railroad noise continuously and providing the fundamental knowledge for the measures of railroad noise. For this, we investigated the actual condition of railroad noise and status of noise level by floor in apartments around the capital region, Daejeon, Daegu, Gwangju, and Busan. Additionally, we present the basic data that will be used for predicting the noise level near railroad in the environmental impact assessment

• Proceedings of the KSR Conference
• /
• 2001.05a
• /
• pp.97-102
• /
• 2001

If the Seoul-Pusan high-speed rail project is able to open its revenue service in 2004, Korea will be the fifth country with an HSR system in the world. And, it will be recorded as a major milestone in the transportation history of Korea. But, Government regulated railroad fare because railroad fare increase can bring negative influences to CPI(Consumer Price Index). Consequently, Korea National Railroad cannot afford to operate railroad independently under current railroad fare system. In this paper, we studied the railroad fare system under implementation and its influences to CPI. And then we proposed that railroad fare must be decided by competition with other transportation modes and based on the demand variance by introducing YMS(Yield Management System).

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.6
• /
• pp.886-890
• /
• 2013

Uplift of contact wire and dynamic characteristics between pantograph and contact wire are key interaction performance of OCS (Overhead Catenary System). These two evaluation items are the approval criteria for the performance between OCS and pantograph. A telemetry system or DAQ (Data Acquisition) System based on wireless communication make it monitor a dynamic behavior which is measured directly in a 25 kv like parts. While permissible working time is too short time to install is too long. In this paper, it is described that optimization the telemetry measurement system for OCS and increasing accuracy, easy adaptation, and faster handling can be also achieved through the study.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.6
• /
• pp.837-842
• /
• 2022

The "Intelligent Railroad Alignment Design Program (ei-Rail) developed in 2013 has been adopted in the planning and the evaluation/validation of design results of oversea railroad construction projects. Target countries of Korean railroad industries requires the operating speed increase with alignment improvement and the double tracking of prevailing single track railroads as well as new railroad construction. This study is to develop an additional module for double tracking project of prevailing single track railroads in the ei-Rail. The developed method is based on the geometrics of prevailing railroad, and the definition of planned project determines the project cost based on the unit cost by work type, and provides the draft design of double track. The module was validated with a oversea case. It is then expected for oversea railroad double tracking project more efficiently in planning and the evaluation of design results.

• Journal of Environmental Science International
• /
• v.10 no.6
• /
• pp.407-415
• /
• 2001

A case of air pollution study of estimation of emission rate for source to railroad rolling stock and emissive character about is unusual. Recent emission rate of railroad rolling stock was estimated with emission factor of EPA in three region(Seoul, Incheon, and Gyeonggido). But this EPA factor could be incorrect because Korea and America have a different railroad environment in the variety of fuel and character of railroad rolling stock In this study, emission rate of each line, car and region(district) with omission factor of Korean case(National Railroad Administration, 1997) was estimated. In Busan Metropolitan City, railroad rolling stocks were divided accoding to, each line, car and service. Particularly, the Idle fuel rate omitted in the preceding study was included in calculation fuel rate. Total emission rate of Busan Metropolitan City was 887.41 t/year Each emission rates of Kyeongbu line, Donghaenambu line, Gaya line, Uam line, Bujeon line, and idle was 489.15t, 196.46t, 33.94t, 12.66t, 6.47t, and 48.75t, respectively.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.218-219
• /
• 2006

This paper is about modeling on 1500V DC electric railroad system. Electric railroad systems have peculiar characteristics against other electric system. The characteristics arc that the railroad systems have electric vehicle loads which are power-varying and location-varying with time. Because of this load characteristic, the electric railroad system modeling which reflects its own characteristics on EMTDC simulation could not be achieved. However, to reflect load characteristic on EMTDC, this paper suggests electric railroad system modeling by using TPS (Train Performance Simulator) that was developed in Korea Railroad Research Institute. A TPS program has various kinds of input data, such as operation condition, vehicle condition, and power system condition. By these data, TPS calculates mechanical power consumption and location, especially it decide electric power consumption on the basis of the fact that consumed electric and mechanical power are equal. Moreover, on this paper, movement of vehicle is reflected on EMTDC simulation as variation of feeder impedance. Also, an electric vehicle load is modeled as time-varying constant power load model.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.12
• /
• pp.1742-1746
• /
• 2014

In order to develop a overhead catenary system for the maximum speed of 400 km/h on Honam high-speed line, increasing tension of contact wire, changing dropper distributions, reducing a hard point and etc. should be considered. And it is also essential to develop core components taking account of the increased tension. Therefore we developed a new steady arm for the max. speed of 400 km/h in this study. FEM (Finite Elements Method) analysis was performed to ensure the strength of the arm. An oval shape was applied to the arm, so that 25 % of strength was increased and 9 % of weight was decreased. And a type test according to the code KRSA-3012 was performed to ensure the performance. Fatigue test in KRRI (Korea Railroad Research Institute)'s test-bed was also performed to evaluate its performance. Some section of the Honam High-speed line was constructed with the developed steady arm.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.5
• /
• pp.565-571
• /
• 2011

Because most fatigue cracks in wheel and rail take place by rolling contact of wheel and rail in railroad industry, it is critical to understand the rolling contact phenomena, especially for the three-dimensional situation. This paper presents an approach to steady-state rolling contact problem of three-dimensional contact bodies, with or without tangential force, based on the finite element method. The steady-state conditions are controlled by the applied relative slip and tangential force. The three-dimensional distribution of tangential traction and contact stresses on the contact surface are investigated. Results show that the distribution of tangential traction and contact stresses on the contact surface varies rapidly as a result of the variation of stick-slip region. The tangential traction is very close in form to Carter's distribution.

• Journal of architectural history
• /
• v.17 no.6
• /
• pp.29-44
• /
• 2008

This paper analyses the railroad trunk line constructed in the Korea since the end of the 19th century. The analysis consists of the following problematics. 1) The process of the decision of the railroad route 2) The relationship of the location of Eupchi and the stations By clarifying the above, the purpose of this paper is to clarify how the morphology of the city in Korea has been affected by the change in the relationship with Korea and Japan. The Empire of Japan has been reconnoitering the Korea since way before the formal contract for the railroad construction was signed. Therefore, the Empire of Japan had a very good understanding of the actual transportation system when it started the construction of the railroad. The railroad construction was used by the Empire of Japan to empower the control over the Korea. For this reason, the new railroad system was constructed as a different system from the former transportation system and the urban system was also affected. Also the relationship of the western powers and Japan around the turn of the 20th century defined the characteristic of the railway system as a pathway through the Korean peninsular to link Japan to the continent. Moreover, being apprehensive about the friction with the western, Japan located the railway stations to avoid the missionary land properties. This made it clear that the restraint relationship between Japan and the western affected the urban special structure.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.2
• /
• pp.9-18
• /
• 2016

The railroad is one of the most popular means of transport. Howerver, railroad agencies are managing the railroad information and provide its service respectively. That is, because of managing the different information and its type, The user will not receive the correct and integrated information. In this study, We figure out the needs of passengers that they want in railroad service and seek an integrated service plan that railroad passengers can use the railroad information service at a time, at a glance and in one place. Also, we investigate the knowledge-base construction to provide a knowledge map service to railroad passengers.