• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.385-390
• /
• 2005

LMTT (Linear Motor-based Transfer Techn-ology) is a horizontal transfer system for the yard automation, which has been proposed to take the place of AGV (Automated Guided Vehicle) in the maritime container terminal. The system is based on PLMSL (Permanent Magnetic Linear Synchronous Motor) that consists of stator modules on the rail and shuttle car. It is desirable to reduce the weight of LMTT in order to control the electronic devices with minimum energy. In this research, the DACE modeling, known as the one of Kriging interpolation, is introduced to obtain the surrogate approximation model of the structural responses. Then, the GRG(Generalized Reduced Gradient) method built in Excel is adopted to determine the optimum. The objective function is set up as weight. On the contrary, the design variables are considered as transverse, longitudinal and wheel beam's thicknesses, and the constraints are the maximum stresses generated by four loading conditions.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.13
• /
• pp.151-192
• /
• 2000

This study has been focused on the revisions and characteristics of the 7 non-maritime trade terms(EXW, FCA, CPT, CIP, DAF, DDU and DDP) in Incoterms 2000. Main characteristics are as follows: First, the use of different expressions intended to convey the same meaning has been avoided and the same expressions as appear CISG have been used. Second, the content of preamble in each trade terms has been shortened and definitedly. Third, if the parties are going to use variants of trade terms in Incotrems 2000, the meanings should be made clear by adding explicit wording in the contract of sale. Main revisions of the 7 trade terms are as belows: First, Incoterms 2000 has emphasized that in EXW, the seller delivers when he places the goods at the disposal of the buyer at the seller's premises or another named place(i.e. works, factory, warehouse, etc.) not cleared for export and not loaded on any collecting vehicle. Second, in FCA, delivery is completed; a) If delivery occurs at the seller's premises, the seller is responsible for loading. b) If delivery occurs at any other place, the seller is not responsible for unloading. Third, in CPT and CIP, all costs and charges relating to the goods whilst in transit until their arrival at the agreed place of destination, unloading costs and all duties, taxes and other charges as well as the costs of carrying out customs formalities payable upon import of the goods and for their transit through any country are linked with the content under the contract of carriage. Fourth, Incoterms 2000 has emphasized that in DAF, the seller delivers when the goods are placed at the disposal of the buyer on the arriving means of transport not unloaded, cleared for export, but not cleared for import at the named point and place at the frontier, but before the customs border of the adjoining country. Fifth, Incoterms 2000 has emphasized that in DDU, the seller delivers the goods to the buyer, not cleared for import(in DDP, cleared for import), and not unloaded from any arriving means of transport at the named place of destination. Sixth, if the parties do not intend to deliver the goods across the ship's rail, FCA, CPT and CIP instead of FOB, CFR and CIF should be used.

• Journal of Biosystems Engineering
• /
• v.37 no.5
• /
• pp.287-295
• /
• 2012

Purpose: Some of the most representative approaches are to apply next generation technologies to save energy consumption, fully automated control system to appropriately maintain environmental conditions, and autonomous assistance system to reduce labor load and ensure operator's safety. Nevertheless, improvement of upcoming method for soil cultured greenhouse has not been sufficiently achieved. Geometrical complexity of ground in protected crop cultivation might be one of the most dominant factors in design of autonomous vehicle. While there is a practical solution fairly enough to promise an accurate travelling, such as autonomous sprayer guided by rail or induction coil, for various reasons including the limitation of producer's budget, the previously developed sprayer has not been widely distributed to market. Methods: In this study, we developed an autonomous sprayer considering travelling performance on geometrical complexity of ground in soil cultured greenhouse. To maintain a stable travelling and to acquire a real time feedback, common wire with 80 mm thick and body frame and sprayer boom. To evaluate performance of the prototype, tracking performance, climbing performance and spraying boom's uniform leveling performance were individually evaluated by corresponding experimental tests. Results: The autonomous guidance system was proved to be sufficiently suitable for accurate linear traveling with RMS as lower than approximately 10 cm from designated path. Also the prototype could climb $10^{\circ}$ of ground's slope angle with 40 kg of water weight. Uniform leveling of spraying boom was successfully performed within $0.5^{\circ}$ of sprayer boom's slope. Conclusions: Considering more complex pathways and coarse ground conditions, evaluations and improvements of the prototype should be performed for promising reliability to commercialization.

• Fire Science and Engineering
• /
• v.31 no.2
• /
• pp.74-81
• /
• 2017

This study analyzed the regulatory actions of disposal gas lighters as well as the situations, causes, and preventive measures of fires, and accidents caused by disposal gas lighters. Since child-resistant lighters became mandatory, the percentage of fires caused by playing with fire has decreased in Korea as it did in America and Japan. Fires caused by disposal gas lighters can occur by afterburning, unintentional lighting, large flames, or explosion or bursting as well as by arson and playing with fire. This study suggests the preventive measures of fires caused by disposal gas lighters as follows: Taking a step not to be used as child's tool for playing with fire, the warning of fire cases caused by afterburning, warning of the dangers of leaving disposal gas lighters on the car dashboard or high temperature places, improving the protective synthetic resin cover of the stop part of a vehicle seat rail, and providing information on precautions for keeping in drawers or disposition methods.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.555-560
• /
• 2003

Korean High Speed Train(KHST) has been tested on the high speed test line in Osung site of Korea High Speed Rail Construction Authority (KHRC). since it was developed as G7 Project Plan In 2002. This paper introduces the dynamic test devices in KHST and shows the comparison between the results of test and theoretical computing results which derive from the new model for KHST dynamic behavior. Previous computer simulation model for KHST was developed to review wether the vehicle system was satisfied with the dynamic performance requirements during the design procedure. But It should be applied the results of the parts test for suspension elements in order to compare between the results of computation and real test. Using VAMPIRE Program made by AEA Technology in UK. the new model also was modified. This paper shows that the static wheel loads calculated from new model is similar to test results. For test on high speed line, we prepared the test devices for evaluating the dynamic performances. which was consisted of the accelerometers( based on Kisler Co.) and the data aquisition systems (based on National instrument Co.), and test program coded by LabView 6i program. These lest devices and programs are flexible to extension the channels for adding sensors and connect to the ethernet network. The acceleration of car bodies, bogie frames and axle boxes were compared between the results of computation and test at 150km/. This paper shows that the results of test were high in high frequency band range but similar frequency band range. It might be considered that these differences were caused by the test which did not performed at constant speed for comparison analysis. Also. It will be able to understand the differences and make better results through a lot of tests planed in future.

• Journal of the Ergonomics Society of Korea
• /
• v.25 no.4
• /
• pp.129-135
• /
• 2006

he purpose of this study is to measure bio-signal to investigate the driver's physiological response change under real situation using train simulator. The train simulator used in this study is KTX model and according to changes of driving situation, The bio-signal controlled by autonomic nervous system, such as GSR(Galvanic Skin Response), SpO2(Saturation percent O2), HR(Heart Rate), ECG(Electrocardiograph), EEG(Electroencephagram) and movement and response of eye were measured. Statistically significant difference in bio-signal data and eye movement activity pattern were investigated under several different driving speeds using analysis of variance (p<0.05). The GSR and HR value measured in average and mission speed operation is higher than in high-speed operation. β wave of EEG in average speed operation become more activated than in high speed operation. In accordance with a characteristic of rail vehicle, movement and response of eye in high-speed operation requiring relatively simple maneuver become less activated than in either average or mission speed operations. Conclusively, due to more careful driving controls in average and mission speed operation are required than in high-speed operation, level of mental and physical stresses of train driver was increased and observed through changes of bio-signal and eye movement measured in this study.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.11
• /
• pp.1161-1167
• /
• 2015

A slender guideway is essential in improving aesthetically and reducing its construction cost which accounts for about 70% of overall investment for maglev system. As the slender guideway, however, may increase its deformation, its effect on levitation stability and guidance performance needs to be analyzed. The purpose of this study is to analyze the effect on guidance characteristics of maglev due to the lateral deformation of the guideway girder and lateral irregularity of guiderail. For doing this, 3D model considering lateral deformation of girder and irregularity of rail of the guideway is developed. Using the dynamic interaction model integrated with the proposed guideway and maglev vehicle including electromagnetics and its controller, guidance characteristics of maglev are analyzed. It is analyzed that the effect on lateral deformation of girder is relatively small compared to deformation on the lateral irregularities of guiderail.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1994.10a
• /
• pp.7-8
• /
• 1994

최근 들어 원자재, 재공품 또는 완제품을 신속하고 정확하게 공급/배분하기 위해 저장과 인출을 담당하는 Material Handling System을 이용하여 작업자의 개입요소를 줄이며, 제고관리 Computer를 이용하여 입고/출고 명령을 유효적절하게 처리하는 ASRS(Atomated Storage and Retreival System : 자동창고 시스템)가 널리 공급되고 있다. 중앙은행의 현금창고, 병원의 약품창고, 식품/화장품 회사의 배송창고, 군수물자의 군납창고에 이르기까지 물품의 저장 또는 공급의 필용성을 갖는 곳에서는 어디든지 찾아볼 수 있는 ASRS는 가깝게는 관공소나 대형빌딩의 주차장에도 이의 개념이 도입되어 사용됨을 볼 수 있다. 최근의 인금인상, 구인난등의 이유로 ASRS설치는 계속 증가할 추세에 있으나 자동 창고 시스템을 설치하기 위해서는 막대한 초기 투자가 필요하며 시스템의 설계 및 설치후 운영에 대한 연구가 반드시 필요하다. ASRS의 운영 Rule 검증, 수행능력 분석등의 목적을 갖는 연구에는 여러 접근방법이 있을 수 있으나 구성 설비와 운영 Rule의 복잡한 관계로 컴퓨터 시뮬레이션의 거의 유일한 문제해결 방법이다. ASRS의 Modeling에 관한 기존의 연구로는 수리모델 수립. 이산사건 시스템의 관점에서 event-graphy, petri-net을 이용한 modeling이 있으며 ASRS에 대한 전용 Simulator 개발등이 진행되었다. 본 연구의 대상 시스템은 2개의 Rack과 하나의 Stacker Crane 으로 구성된 Aisle과 입출고의 물류를 처리하는 순환 RGVS(Rail Guided Vehicle System), 입/출고장을 구성하는 Conveyor Net등으로 이루어진 제조-물류시스템의 일반적인 ASRS이다. 또 이 ASRS의 입/출고 방식은 전수 입/출고만을 포함하며 Blocking 방지를 위한 Capaicty 예약, 다중설비 선택등의 문제등을 고려하고 있다. 본 연구의 접근방법으로는 ASRS의 개념적인 Reference Model을 수립하고 이 Reference Model에 대한 Formal Model로 DEVS(Discrete Event System Specification)을 이용하여 시스템을 Modeling하였다. 이의 Computer Simulation을 위하여 DEVS형식론 환경에서의 Simulation Language인 DEVSim ++ⓒ를 이용하여 시스템을 구현하였다.

• Journal of the Korean Society for Railway
• /
• v.19 no.2
• /
• pp.109-116
• /
• 2016

The market share of high-speed railway vehicles is increasing across the world. A high-performance impact energy absorption factor is essential to satisfy the safety standards of railway vehicles. A deformed tube assembly is a typical energy absorption factor in railway vehicles. The tube assembly comprises a deformed tube and a press-fitting punch, its performance depends on the absorption energy characteristics in the plastic zone of the tube. In this study, a deformed tube assembly of a railway vehicle is designed that can absorb a maximum impact energy of 200kJ under plastic deformation. Slab method and finite element analysis are used to estimate the reaction force of the punch in the initial stage, the performance of the designed tube assembly is confirmed experimentally.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.1
• /
• pp.43-56
• /
• 2013

Personal Rapid Transit(PRT), which is one of the next generation convergence transport technology, PRT system requires operation technology for controlling diverse vehicles and dealing with a variety of abnormal driving situations on a large scale trackway structures in expected operational area more efficiently and reliably. Before developing PRT control technology, it is essential that multiple testing procedures stepwise with building small scale test-tracks and develop real unmanned-vehicles. However, it is expected that the experiments demand huge amount of time and physical cost. Thus, simulation in virtual environment is efficient to develop wireless based control technology for multiple PRT vehicles prior to building real-test environment. In this paper, we propose a VR-based integrated simulator which physics engine is applied so that it enables simulation of front-wheel-steering PRT system rather than simple rail track system. The proposed simulator is also developed that it can reflect geographical features, infrastructures and network topology of expected driving region.