• Journal of Mechanical Science and Technology
• /
• 제17권9호
• /
• pp.1371-1379
• /
• 2003

The effects of change in injection pressure on spray structure in high temperature and pressure field have been investigated. The analysis of liquid and vapor phases of injected fuel is important for emissions control of diesel engines. Therefore, this work examines the evaporating spray structure using a constant volume vessel. The injection pressure is selected as the experimental parameter, is changed from 22 MPa to 112 MPa using a high pressure injection system (ECD-U2). Also, we conducted simulation study by modified KIVA-II code. The results of simulation study are compared with experimental results. The images of liquid and vapor phase for free spray were simultaneously taken by exciplex fluorescence method. As experimental results, the vapor concentration of injected fuel is leaner due to the increase of atomization in the case of the high injection pressure than in that of the low injection pressure. The calculated results obtained by modified KIVA-II code show good agreements with experimental results.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 추계학술대회 논문집
• /
• pp.125-130
• /
• 2001

It is vary importance that stopping distance for the freight train and need to design parameter of the brake force and friction coefficient. Acoording to the brake force between shoe and wheel less than the adhesion between wheel and rail. Because of vary difference between empty and weight car of 0∼500kN, this solution was made to application for variable loaded brake system. When the V=110km/h. the emergency stopping distance of freight train is about 700m, so this study was considered on the two condition, one of the increse brake force and to be different of the increse friction coefficient on the brake shoe. It was useful increse friction coefficient. Result of study, analyze effect of the brake shoe on the brake force of the freight car and high friction coefficient were proposed. To do this, ${\mu}$=0.155${\pm}$10% when S=600m on the V=110km/h of the train, 2 groove of friction surface on the temperature distribution were considered.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.305-309
• /
• 2010

The buckling behavior of CWR tracks is affected by the various parameters such as stiffness and geometry of track panel, ballast resistance, rail temperature, initial imperfection, and wheel load. Until now, CWR tracks were managed by the dichotomous logic (deterministic approach) despite these influence factors are having the nature of random variables. So, the design method and existing management process to prevent the track buckling can be very non-economic since the value of these influence factors to calculate the track buckling strength are selected by considering the worst track condition. In this study, buckling probability evaluation process is proposed which is based on the reliability index, AFOSM method, and limit state equation.

• 동력기계공학회지
• /
• 제9권4호
• /
• pp.214-219
• /
• 2005

The effects of change in injection pressure on spray structure in high temperature and pressure field have been investigated. The analysis of liquid and vapor phases of injected fuel is important for emissions control of diesel engines. Therefore, this work examines the evaporating spray structure using a constant volume vessel. The injection pressure is selected as the experimental parameter, is changed from 72MPa to 112MPa by using a common rail injection system(ECD-U2). The images of liquid and vapor phase in the evaporating free diesel spray are simultaneously taken by exciplex fluorescence method. As a result, it can be confirmed that the distribution of vapor concentration is more uniform in the case of the high injection than in that of the low injection pressure.

• 한국철도학회논문집
• /
• 제6권4호
• /
• pp.232-238
• /
• 2003

A health monitoring system becomes a very useful tool to obtain information on long term behavior of the important railway structures such as very long span and special type bridges. It can be also used to give a warning signal to the maintenance engineer when the structure shows abnormal behavior. However, due to long term use and temperature changes, the health monitoring system needs to be calibrated periodically. In this study, calibration and gauge factor readjustment process made for the health monitoring system installed in the railroad bridges and tunnel are reviewed and a few findings are updated. Future work will be concentrated on the long-term analysis of the measurement data and on the database structures so that the assessment of the structure is possible

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2010년도 정기 학술발표대회
• /
• pp.78.1-78.1
• /
• 2010

장대레일 궤도는 재료적인 불확실성 및 구조계의 기하학적 불확실성이 매우 높은 시스템으로 궤도 좌굴의 위험이 상존한다. 그러므로 궤도 환경이 열악한 혹서기 장대레일 궤도의 안정성을 합리적으로 평가하는 연구는 매우 중요하다. 궤도 좌굴에 직접적 영향을 미치는 레일온도는 현재 지역의 대표 대기온도에 따른 추정된 레일온도로 사용하고 있는 실정이지만 기후조건에 따라 레일온도가 변동되기 때문에 이를 고려하여 확률분포로써 반영하는 것이 합리적이다. 본 연구는 현장 기후요소 및 레일온도 측정 실험을 수행한 자료들을 DB화하여 혹서기 장대레일 궤도의 안정성 향상 및 신뢰성 확보에 기여하고자 한다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.356-363
• /
• 2003

The CWR of the plate girder bridges in non-ballast causes the additional axial force on the rail and the bearing due to the temperature axial force and the interaction between the CWR and bridges. This study shows the remarkable improvement of reducing the axial force of the CWR on the non-ballast bridge, compared to conventional methods. New method, which is differently designed in terms of longitudinal semi-rigid bearing, reduces the axial force on the bearing by making the girder act both directions. This method is applicable to most cases of bridges regardless of the restriction of length, and useful to reduce the abrasion and damage of the track material.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.460-469
• /
• 2006

It is widely known that the temperature variation introduces the axial force along a CWR(Continuous Welded Rail) in the railway bridges. Additional axial forces are generated due to many other reasons. These includes the interaction between the bridge girder and the CWR; acceleration or deceleration of the vehicles; support rotation (or deflection) of the girder. Among aforementioned reasons, this study investigates the influence of the support rotation on additional axial forces throughout the numerical study and the field test. Several strains gauges are installed along the CWR and the strains are measured under passing trains. It is expected that the elaborated estimation of the axial force on CWR will be beneficial for future railway maintenance.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.130-137
• /
• 2006

In these days abnormal climate occurs frequently because of global warming and earthshock. So it is necessary to prepare for the abnormal conditions like gale, rainfall, heavy snow and high temperature. Fortunately, Korea high speed rail(KTX) have a safety climate detection system for the abnormal weather by using CTC. So the safety is guaranteed in most aspect. But in convention line there isn't any alarm system for the abnormal condition and the train runs until the railroad loss occurred. So convention line need additional regulation same as KTX for the abnormal climate and in the near future passenger safety must be protected by new alarm system.

• 한국자동차공학회논문집
• /
• 제19권6호
• /
• pp.17-22
• /
• 2011

This study is to investigate the effect of the cetane number in ultra low sulfur diesel fuel on combustion characteristics and exhaust emissions at 1500 rpm and 2.6bar BMEP in low-temperature diesel combustion with 1.9L common rail direct injection diesel engine. Low-temperature diesel combustion was achieved by adopting external high EGR rate with the strategic injection control without modification of engine components. Test fuels are ultra low sulfur diesel fuel (sulfur less than 12 ppm) with two cetane numbers (CN), i.e., CN30 and CN55. For the CN30 fuel, as a start of injection (SOI) timing is retarded, the duration of an ignition delay was decreased while still longer than $20^{\circ}CA$ for all the SOI timings. In the meanwhile, the CN55 fuel showed that an ignition delay was monotonically extended as an SOI timing is retarded but much shorter than that of the CN30 fuel. The duration of combustion for both fuels was increased as an SOI timing is retarded. For the SOI timing for the minimum BSFC, the CN30 produced nearly zero PM much less than the CN55, while keeping the level of NOx and the fuel consumption similar to the CN55 fuel. However, the CN30 produced more THC and CO than the CN55 fuel, which may come from the longer ignition delay of CN30 to make fuel and air over-mixed.