• 한국정밀공학회지
• /
• 제28권4호
• /
• pp.490-495
• /
• 2011

A slide-rail system is widely used in home appliances, furniture, mechanical rigs, and so many other applications; due to its high strength and performance for easy moving heavy objectives. In general, a pair of side slide-rails is set on both sides of a drawer to support and move it. So an unbalanced sliding motion can occur during opening and closing a drawer with pull and push force. To settle this problem, single central slide-rail having three collapsible rail-bodies was firstly proposed in this work. 'H'-beam shaped rail-body was newly designed to have enough bending and twisting strength. The experimental test showed that the proposed rail could be applied to large-size home appliances for easy moving drawer with heavy weight.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1995년도 추계학술대회논문집; 한국종합전시장, 24 Nov. 1995
• /
• pp.197-200
• /
• 1995

Corrugation of railway track can be caused by the various dynamic behavior of travelling wheels and track. In this paper, the coupled vibrations of travelling wheel and railway track are analyzed as the cause of corrugations. To analyze the coupled vibrations, the track supported by the sleepers and the traveling wheel are identified to the elastically supported infinite beam and the spring-mass system which runs at constant speed. The Hertzian contact spring is considered betwen the infinite beam and spring-mass system. The dynamic responses of elastically supported infinite beam and spring-mass system are calculated. The cause and development of rail corrugation are discussed in the view point of contact force fluctuation affected by the elastic supports and the corrugated surface profile of the track. By the obtained results, the possibilities of resonance are checked between the excitation by the corrugated surface profile and the natural frequency of contact spring-moving mass system. It may be thought to a development of railway corrugation.

• International Journal of Railway
• /
• 제6권4호
• /
• pp.155-159
• /
• 2013

The purpose of this study was to develop a theoretical model to analyze the vibration of finite railways forced by distributed moving loads. The vibration characteristics of compliantly supported beam utilizing compressional damping model were investigated through the Rayleigh-Ritz method. The distributed moving load was analyzed as the cross correlation function on railways. This allowed the use of statistical characteristics for simulation of the moving train wheels on the rail. The results showed there is a critical velocity inducing resonant vibration of the rail. The mass spring resonance from the rail fastening systems exhibited significant influence on the resulting vibration response. In particular, the effect of the viscoelastic core damping was investigated as an efficient method for minimizing rail vibration. The decrease of the averaged vibration and rolling noise generation by the damping core was maximized at the mass-stiffness-mass resonance frequency.

• 한국자동차공학회논문집
• /
• 제17권3호
• /
• pp.35-44
• /
• 2009

The purpose of this paper is to describe experimental results about the T-joint welding of the high power continuous wave (CW) fiber laser for SAPH steel plate for seat frame of car. The seat rail is a part of seat frame of cars. The assembling method is mostly fix up using a bolt and nut. But this assembling method has many demerits in productivity such as increasing work process and material cost. This paper presents an experimental study about Laser T-Joint weldability of seat rail. Laser welding has many advantages in lightness and saving material costs of seat frame. The laser beam was moved along the work pieces by six axis robot with process optical fiber. The laser beam is focused with a welding head within incident angle $15{\sim}45^{\circ}$ for the purpose of the T-joint welding through two side full penetration. The range of the root gap size is less than ${\leq}0.4mm$. Optical microscopy SEM were performed to observe the micro structures and determine the structures of welded zone.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 춘계학술대회 논문집
• /
• pp.471-478
• /
• 2000

수 십년 동안 철도는 비교적 짧은 길이의 레일을 신축이음을 두고 연결한 궤도로 건설되었다. 신축 이음은 궤도에 손상과 유지비 증가 등의 많은 단점들을 유발시켰다. 그래서 철도 기술자들은 신축이음부를 제거하는데 관심을 가지게 되었다. 장대레일 궤도는 기존의 레일에 비해 많은 잇점들을 가지게 되었지만, 온도에 의한 갑작스런 횡방향 좌굴이라는 새로운 문제를 야기 시켰다. 본 연구에서는 우선 침목의 영향을 정확히 고려한 장대 레일 궤도의 3차원 해석 모텔과 해석 프로그램을 유한 요소법을 사용하여 개발하여 선형 정적 해석 및 좌굴 해석을 수행할 수 있도록 하였다. 개발된 해석 모델의 특징은 레일요소로 7자유도의 보요소를 사용한 것과 궤도 구성요소의 도심축의 차이를 정확히 고려한 옵셋기법의 사용, 그리고 레일 단면내의 온도 구배를 고려한 것이다. 다음으로, CWRB에 의한 선형 정적해석 및 좌굴해석을 통해, 장대레일 궤도의 거동 및 안정성에대한 다양한 궤도 구성요소들(레일, 도상, 체결재, 침목 등..)의 영향을 고찰하였다.

• 한국정밀공학회지
• /
• 제24권9호
• /
• pp.119-129
• /
• 2007

The residual life expectancy of the container crane which has been operated more or less 39 years is examined carefully, especially on the boom structure. The basic load and load combination need to be considered for to analyse the boom structure. Various parts of container crane are modeled for to analyse stress, the deflection and the fatigue. Analysis results show that the boom is stable in the stress and deflection but the boom vertical member is over the fatigue life. The rail support beam and boom bottom chord are approximately near the fatigue life. Analysis results show that the residual life of rail support beam and the boom bottom chord would be 2.2 years and 6.8 years, respectively.

• 한국자동차공학회논문집
• /
• 제5권1호
• /
• pp.59-68
• /
• 1997

The modelling techniques of a center pillar-to-roof rail joint for low frequency vibration analysis are examined and some fundamental problems are addressed. To develop a simplified beam-spring model of the joint, the present work is focused on 1) practical shell modelling techniques and 2) joint spring stiffness estimation methods a practical model-updating method to match the calculated natural frequencies to the experimentally determine ones is proposed, particularly focusing on spot welding modelling. In joint spring modelling, the results from the model with one joint spring are compared with those from the model with three coupled springs. Finally, some fundamental problems in beam-spring modelling are addressed.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(II)
• /
• pp.1094-1099
• /
• 2002

In this paper, a numerical method for vehicle-track interaction analysis is developed to evaluate vertical dynamic force subjected to rail surface. A vehicle is modelled by lumped masses system and track by multi layered continuous beam system. The equation of motion of vehicle and track interaction system is derived by considering compatibility condition at the contact points between wheel and rail. The input vibration source is given by the empirical formula of power spectral density of track irregularity, which is suggested by FRA. Using this method, dynamic impact factors with the train speed are evaluated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.107-110
• /
• 1994

This paper focuses on the dynamic interaction between travelling vehicle and flexible guideway rail system. From a numerical analysis on the simply supported beam vibration excited by a sequence of magnetic force, we studied the dynamic response of MAGLEV.

• 한국정밀공학회지
• /
• 제30권4호
• /
• pp.421-426
• /
• 2013

Nowadays in building construction field, workers become aged and avoid dirty, difficult, and dangerous work. Above all, a person who is in charge of beam assembling work in high and narrow space just relies on safety belt. So these workers should be highly trained. This paper deals with a new locomotion robot that can take this in charge, which will be able to provide less labor costs, less time to build a building and safer environments for workers. The geometric features of steel structure in building construction were carefully analyzed and developed a locomotion mechanism optimized to it. The robot was designed to be rugged, strong, and fast rather than having excessive mobility. Feasibility of the developed robot was verified through experiments.