• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.320-323
• /
• 1997

The microwave dielectric properties of X Ba0-$0.15(Nd_{0.87}Bi_{0.13})_2O_3$-(0.85-X) $TiO_2$ ($X=0.13{\sim}0.17$) and 0.16Ba0-$0.15(Bi_xNd_{1-x})_2O_3-0.69TiO_2$ ($X=0.10{\sim}0.16$) ceramics were investigated. Dielectric constant, quality factor and temperature coefficient of resonant frequency of 0.16Ba0-$0.15(Nd_{0.87}Bi_{0.13})_2O_3-0.69TiO_2$ ceramics sintered at $1320^{\circ}C$ for 2 hours were 89.2, 1920(at 4GHz) and 5.2ppm/$^{\circ}C$, respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 Techno-Fair 및 합동춘계학술대회 논문집 전기물성,응용부문
• /
• pp.199-200
• /
• 2008

ZnO을 주원료로 하고 첨가제로 $Bi_2O_3$, $Sb_2O_3$, $Nd_2O_3$, CoO, $Cr_2O_3$, $MnO_2$, NiO를 고정한 후 $Y_2O_3$ 첨가량에 바리스터의 전기적 특성을 검토하였다. $Y_2O_3$ 첨가량이 증가할 수록 바리스터 전압이 직선적으로 증가함을 확인할 수 있으며 결정립계에 존재하는 스핀넬상에 $Y_2O_3$가 이차상으로 존재함을 확인 할 수 있었다. $Y_2O_3$ 첨가에 따라 ZnO 결정입자 성장을 방해하여 바리스터 전압을 증가시키는 반면 결정립의 크기를 불균일하게 하여 유전율을 감소시키고 유전손실은 증가함을 확인하였다. 본 연구 결과 $Y_2O_3$ 첨가로 바리스터 전압은 350 V/mm이상을 얻을 수 있으며 누설전류를 $1{\mu}A$이하로 하는 조성을 얻을 수 있었으며 소형 바리스터 제작이 가능함을 확인하였다.

• 동의신경정신과학회지
• /
• 제13권2호
• /
• pp.173-194
• /
• 2002

Alzheimer's disease(AD) is a geriatric dementia that is widespread in old age. In the future AD will be the largest problem in public health service. From old times, Much medicines have been used for treatment of dementia, but there is no medicine having obvious effect. AD is one of brain retrogression disease. So We studied on herbal medicine that have a relation of brain retrogression. From old times, In Oriental Medicine, Rhizoma Acori Graminei has been used for disease in relation to brain retrogression. We studied on the effects of anti-Alzheimer in pCT105-induced neuroblastoma cell lines by Rhizoma Acori Graminei extract As the result of this study, In RAG group, the apoptosis in the nervous system is inhibited, the repair against the degerneration of Neuroblastoma cells by CT105 expression is promoted. These results indicate that RAG possess strong inhibitory effect of apoptosis in the nervous system and repair effect against the degeneration of Neuroblastoma cells by CT105 expression.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.611-615
• /
• 2003

The crystalline and dielectric properties on $Al_2O_3$ filled glass frit ($CaO-Al_2O_3-SiO_2-MgO-B_2O_3$) with admixtures of $TiO_2$ have been investigated. The dielectric constant value of $7.5{\sim}7.8$, quality factor value of 700 were obtained for glass frit : $Al_2O_3$ (50 : 50 wt%) ceramics. As the amount of $TiO_2$ increased, temperature coefficient of dielectric constant were decreased.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 일렉트렛트 및 응용기술
• /
• pp.75-78
• /
• 2002

The dielectric properties for Ni electrode multilayer ceramic chip capacitor for Y5V has been studied with $(Ba_{0.93}Ca_{0.07})_m(Ti_{0.82}Zr_{0.18})O_2+MnO_2$ 0.2wt%, $Y_2O_3$ 0.18wt%, $SiO_2$ 0.15wt%, glass frit 1 wt% composition. The m ratio in the range of 1.006 ~ 1.012 have dielectric constant 9,500 ~ 14,500 and insulation resistance 390 ~ 460 $G{\Omega}$. Using the dielectrics, nikel electrode multilayer chip capacitor with Y5V, 104Z in EIA 0603 size specific capacitance were developed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.364-367
• /
• 2003

[ $(Ba_{0.93}Ca_{0.07})_{1.009}(Ti_{0.82}Zr_{0.18})O_{2.}$ ] 이고 첨가제로 $MnO_2$ 0.2wt%, $Y_2O_3$ 0.18wt%, $SiO_2$ 0.15wt% 유리프릿으로 $(Ba_{0.4}Ca_{0.6})SiO_3$ 1 wt%를 첨가한 조성을 이용하여 각 공정별 최적화를 통해 고 신뢰성이면서 고용량 MLCC를 제작하였다 고 신뢰성 MLCC 제작에서 있어 최적의 소성온도를 확인 할 수 있었으며 외부 전극을 통한 도금액 침투를 방지하여 절연저항 특성을 향상할 수 있음을 확인하였다. 또한 1608 크기의 1.13uF의 용량을 가지는 고 신뢰성 MLCC를 제작하였다.

• 한국전기전자재료학회논문지
• /
• 제28권7호
• /
• pp.473-479
• /
• 2015

Hybrid supercapacitors with high power density and long cycle life are widely used for emergency power source of LED emergency luminaires. In this paper, we designed and fabricated a hybrid capacitor cell and a module for the LED emergency luminaires. Using hybrid supercapacitor cells (1,000 F, 2.8 V), we designed a module in a 10-year warranty considering aging and ESR. Considering the ESR and efficiency has been designed to module with 1,000 F 5.6 V design results in 2 series and 2 parallel combination. Module was used to confirm that the operation 77.5 minutes at room temperature, discharge LED emergency luminaires with 2 W. As a LED emergency luminaires of emergency power supply that we can support more than 10 years of life was confirmed the applicability of hybrid supercapacitor.

• 한국전기전자재료학회논문지
• /
• 제19권7호
• /
• pp.662-666
• /
• 2006

Microstructure and electrical properties of ZnO varistors as a function of sintering temperature and times were investigated. Sintering temperature and times greatly affected electrical properties and Bi-rich liquid phase of the microstructure. The varistor which were sintered at $1125^{\circ}C\sim1150^{\circ}C$, for 2 hr exhibited the varistor voltage$(V_c)$, nonlinear coefficient $(V_{10mA}/V_{1mA})$, leakage current$(I_L)$ dielectric constant and dissipation factor as $225\sim250V/mm,\;0.89\sim0.92,\;0.8\sim1.1{\mu}A,\;720\sim740\;and\;1.8\sim2.0%$, respectively.

• Transactions on Electrical and Electronic Materials
• /
• 제10권1호
• /
• pp.5-8
• /
• 2009

The reliability of multilayer ceramic capacitor with active thin dielectric layer was investigated by highly accelerated life test at various stress condition. The distribution of multilayer ceramic capacitor failure times is plotted as a function of time from Weibull distribution function. According to the test result, voltage acceleration factor is obtained from 2.24 to 2.96. The acceleration by temperature is much higher than other values of active thick dielectric layer. It is clear that median time to failure is affected by the stress voltage for high volumetric efficiency ceramic capacitors with active thin dielectric layer. The degradation under stress of voltage involves electromigration and accumulation of oxygen vacancy at Ni electrode interface of cathode.

• 한국전기전자재료학회논문지
• /
• 제20권2호
• /
• pp.118-123
• /
• 2007

The purpose of this work was to investigate the design and fabrication process effects on electrical properties in high capacitance multilayer ceramic capacitor (MLCC) with nickel electrode. Dielectric breakdown voltage and insulation resistance value were decreased with increasing stack layer number, but dielectric constant and capacitance were increased. With increasing green sheet thickness, dielectric breakdown voltage, C-V and I-V properties were also increased. The major reasons of the effects were thought to be the defects generated extrinsically during fabrication process and interfacial reactions formed between nickel electrode and dielectric layer. These investigations clearly showed the influence of both green sheet thick ness and stack layer number on the electrical properties in fabricating the MLCC.