• 한국방사선학회논문지
• /
• 제1권1호
• /
• pp.25-30
• /
• 2007

본 연구의 목적은 ROC를 이용하여 일반 촬영기기에 따른 영상의 질을 평가해보고자 함이다. 본 연구의 수행을 위하여 CR(Computed Radiography)과 DDR(Direct Digital Radiography)을 사용하였으며 피사체로 흉부 팬텀을 사용하였다. 각 기기에서 영상을 획득한 후 ROC평가를 이용하여 영상의 질 및 기기의 특성을 평가하였다. 조사 조건으로 관전압 120kVp와 관전류량 3.2 mAs를 이용하였고 SID(Source to Image Distance)는 180cm로 설정하였다. 팬텀의 심장, 폐야, 흉추부위에 병소를 표현하였으며 각 장비에서 획득한 영상의 질 및 기기의 특성을 파악하기 위하여 방사선학 전공자 29명을 대상으로 ROC평가를 실시하였다. ROC 평가 결과 DDR의 TPF(true positive fraction)는 0.552, FPF(false positive fraction)는 0.474, CR의 TPF는 0.629, FPF는 0.405로 나타났다. 본 연구 결과 CR의 영상이 DDR의 영상보다 더 나은 영상의 질을 나타내는 것을 확인하였다. 영상의 질의 확연한 차이의 원인은 DDR의 경우 enhance board의 미 삽입으로 인한 영상 후처리의 미수행이라고 사료된다. 추후 DDR의 enhance board의 삽입 후 영상의 후처리가 가미된 DDR영상의 질에 대한 연구가 필요하며 본 연구의 결과로 인하여 영상의 후처리가 임상의 판독에 있어서 매우 중요한 요소임을 확인할 수 있었다.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.432-435
• /
• 2002

We have developed and proposed the heavy ion CT system which consists of fluorescent screen and CCD camera equipped with image intensifier. In our system, we have measured the residual range of particles that passed a phantom and reconstructed the CT image for the distribution of relative stopping power by filtered back projection method with Shepp '||'&'||' Logan filter. The heavy ion $\^$12/C accelerated up to 400 MeV/u by HIMAC (Heavy Ion Medical Accelerator in Chiba) was used. Intensity of the beam output changes like macro pulse, the period being 3.3 sec and the width being 2 sec. The series of data was acquired in synchronizing with the pulse, leading to the improvement of S/N in the CT image. The fundamental performance was experimentally evaluated in the proposed system. The spatial resolution was estimated to be about 1 mm and the density resolution (electron density referred to water) to be about 0.01.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.228-230
• /
• 2002

The relative electron density resolution was discussed by the noise power spectrum (NPS) in the heavy ion CT image. The heavy ion beam $\^$12/C accelerated up to 400MeV/u by RIMAC was used in this study. The two-dimensional (2-D) NPS in the CT image was obtained from the one-dimensional (1-D) NPS of the measured residual range distribution of water phantom for single projection, and the noise variance in the CT image was calculated from 2-D NPS. The technique used in the reconstruction was the filtered back-projection method with Shepp-Logan filter. The calculated value suggests the result of our previous works using the density resolution phantom, assuming that the relative electron density resolution is twice the standard deviation. Therefore, the estimation of the noise in CT images by 2-D NPS obtained the measured residual range distribution is the useful method.

• 대한방사선기술학회지:방사선기술과학
• /
• 제41권6호
• /
• pp.595-602
• /
• 2018

Quality control (QC) of Computed Tomography (CT) devices is based on image quality measurement on AAPM CT phantom which is a standard phantom. Although it is possible to control the accuracy of the CT apparatus, it is expensive and has a disadvantage of low penetration rate. Therefore, in this study, we make image quality measurement phantom at low cost using FFF (Fused Filament Fabrication) type three-dimensional printer and try to analyze the usefulness, compare it with existing standard phantom. To print a phantom, We used three-dimensional printer of the FFF system and PLA (Poly Lactic Acid, density: $1.24g/cm^3$) filament, and the CT device of 64 MDCT (Aquilion CX, Toshiba, Japan). In addition, we printed a phantom using three-dimensional printer after design using various tool based on existing standard phantom. For image quality evaluation, AAPM CT phantom and self-generated phantom were measured 10 times for each block. The measured data were analyzed for significance using the Mannwhiteney U-test of SPSS (Version 22.0, SPSS, Chicago, IL, USA). As a result of the analysis, phantom fabricated with three-dimensional printer and standard phantom showed no significant difference (p>0.05). Furthermore, we confirmed that image quality measurement performance of a phantom using three-dimensional printer is similar to the existing standard phantom. In conclusion, we confirmed the possibility of low cost phantom fabrication using three dimensional printer.

• 대한방사선기술학회지:방사선기술과학
• /
• 제46권1호
• /
• pp.15-21
• /
• 2023

This study was purpose to assessment of the resolution characteristics by using ATS 535H Basic quality assurance (QA) phantom for ultrasound. The ultrasound equipment was used Logiq P6 (Ultrasound, GE Healthcare System, Chicago, IL, USA). And the ultrasound transducer were used Convex 4C (4~5.5 MHz), Linear 11L (10~13 MHz), Sector 3SP (3~5.5 MHz) probe. As for the noise power spectrum (NPS) comparison results by using ATS 535H Basic QA ultrasound phantom and Convex 4C, Linear 11L, Sector 3SP probe. The NPS value of the Convex 4C probe image was 0.0049, Linear 11L probe image was 0.0049, Sector 3SP probe image was 0.1422 when the frequency is 1.0 mm^-1. The modulation transfer function (MTF) comparison results by using ATS 535H Basic QA ultrasound phantom and Linear 11L probe the MTF value of the 3 cm focus image was 0.7511 and 4 cm focus image was 0.9001 when the frequency is 1.0 mm^-1. This study was presented characteristics of spatial resolution a quantitative evaluation methods by using ultrasound medical images for QA of ultrasound medical QA phantom. The quality control (QC) for equipment maintenance can be efficiently used in the clinic due to the quantitative evaluation of the NPS and MTF as the standard methods. It is meaningful in that it is applied mutatis mutandis and presented the results of physical resolution characteristics of the ultrasound medical image.

• Imaging Science in Dentistry
• /
• 제32권3호
• /
• pp.129-134
• /
• 2002

Purpose : To implement the database system of oral and maxillofacial radiological images using a commercial medical image management software with personally developed classification code. Materials and methods : The image database was built using a slightly modified commercial medical image management software, Dr. Image v.2.1 (Bit Computer Co., Korea). The function of wild card '*' was added to the search function of this program. Diagnosis classification codes were written as the number at the first three digits, and radiographic technique classification codes as the alphabet right after the diagnosis code. 449 radiological films of 218 cases from January, 2000 to December, 2000, which had been specially stored for the demonstration and education at Dept. of OMF Radiology of Dankook University Dental Hospital, were scanned with each patient information. Results: Cases could be efficiently accessed and analyzed by using the classification code. Search and statistics results were easily obtained according to sex, age, disease diagnosis and radiographic technique. Conclusion : Efficient image management was possible with this image database system. Application of this system to other departments or personal image management can be made possible by utilizing the appropriate classification code system.

• 대한디지털의료영상학회논문지
• /
• 제12권1호
• /
• pp.19-25
• /
• 2010

This study is mainly for the reduction of exposure dose by using a heavy elements filter(Gd) in the digital radiology. They contained heavy elements filter of Gd and X-ray beam hardening filters such as Al and Cu. According to the results of experimental evaluation, X-ray property was not changed with variety of kVp in the case of the Gd filter. The surface dose and absorption dose were increased in order of Cu and Al. The contrast of image showed the higher value in order of Cu, Al and Gd. While the use of Gd has increased the numerical value of the CR image, and grayscale has decreased noise value of the DR image.

• 대한방사선기술학회지:방사선기술과학
• /
• 제24권1호
• /
• pp.67-73
• /
• 2001

In digital image processing, the homomorphic filtering approach is derived from an illumination-reflectance model of the image. It can also be used with an illumination-transillumnation model of X-ray film. Several X-ray images were applied to enhancement with histogram equalization and homomorphic filter based on an illumination-transillumination model. The homomorphic filter has proven theoretical claim of image density range compression and balanced contrast enhancement, and also was found a valuable tool to process analog X-ray images to digital images.

• 대한디지털의료영상학회논문지
• /
• 제14권2호
• /
• pp.63-67
• /
• 2012

Calcium density in human bones decreases as people are getting older due to the interior or exterior environmental factors. Bone aging forms osteoporosis. And this can bring out various spine fractures which develops a complications. Thus the prediction of seniliy is one of the important factors in spine diseases. Once spine aged, diverse fractures occur such as compression fracture and micro fracture. Side images of the spine by the digital radiography (DR) were prepared, and pixel arbitrary unit with Image J was measured from one spot in the lumbar bone part. By calculating pixel arbitrary unit of the simple contrast, it was obtained that the value of pixel arbitrary unit decreased as seniliy of bones increased. By simply applying Image J to the seniliy of patient's spine, the seniliy of bones predicts the level of danger with only digital radiography(2D) image. consequently we show that Image J value of pixel arbitrary unit index for predicts the level of precaution of osteoporosis patient.

• 대한방사선기술학회지:방사선기술과학
• /
• 제35권1호
• /
• pp.25-33
• /
• 2012

본 연구는 보건계열 대학생들의 방사선사 이미지를 조사하여 전문직업인으로서의 방사선사 이미지 향상과 위상을 높이기 위한 기초 자료를 제시하기 위하여 부산광역시와 경상남도 소재 3, 4년제 5개 대학의 보건계열학과 중 임상실습을 이수한 보건계열 전공 대학생을 대상으로 2011년 8월 1일에서 2011년 8월 15일까지 자기기입식 설문조사를 실시 한 후, 자료가 불충분한 17명을 제외한 총 233명을 최종 대상으로 하였다. 자료의 분석은 SAS(ver 9.1)을 사용하여 t-검정, ANOVA, 다중회귀분석 등을 시행한 결과 대상자들의 방사선사 전체 이미지는 $3.33{\pm}0.46$점으로 나타났다. 영역별로는 개인적 이미지가 $3.43{\pm}0.56$점으로 가장 높았고, 사회적 이미지가 $3.12{\pm}0.58$점으로 가장 낮았다. 문항별로는 '전문직이다'가 $3.99{\pm}0.79$점으로 가장 높았고 '일하기 쉽고 스트레스가 없는 직업이다'가 $2.88{\pm}0.98$점으로 가장 낮았다. 학과별로는 방사선과가 $3.46{\pm}0.46$점으로 가장 높았고 물리치료과가 $3.24{\pm}0.40$점으로 가장 낮았다. 방사선사 이미지에 영향을 미치는 요인은 학제, 대중매체를 통한 방사선사 보도 청취 여부, 실습 시 방사선사와의 직접적 교류 여부, 방사선사 위치 등으로 나타났다. 산학협력과 대중매체를 통하여 방사선사에 대한 사회적 이미지를 향상 시키고 방사선사 개인의 능력과 전문성을 길러 의료기관내 위상을 높임으로서 방사선사에 대한 이미지가 긍정적으로 변화 될 수 있게 노력하여 향후 방사선사가 전문 직업인으로 발전되어 나갈 수 있도록 해야 할 것으로 생각한다.