• Journal of Korean Foot and Ankle Society
• /
• v.18 no.3
• /
• pp.124-128
• /
• 2014

Purpose: The purpose of this study was to assess the treatment outcomes and prognosis of Lisfranc joint fracture and dislocation according to the mechanism of injury and treatment method. Materials and Methods: Twenty six patients with Lisfranc fracture-dislocation who had been treated surgically were included in this retrospective study. The patients were divided into two groups according to mechanism of injury: direct crushing injury (16 patients) and indirect rotational or compressive injury (10 patients). The patients were also divided into three groups according to the surgical methods. The parameters used were radiographic evaluation, patients' subjective satisfaction levels, length of hospital stay, and the American Orthopaedic Foot and Ankle Society (AOFAS) midfoot score. Statistical analysis was performed. Results: The mean postoperative AOFAS midfoot score was 78.7. The mean length of stay was 39.6 days. Statistically significant differences in subjective satisfaction, AOFAS midfoot score, and length of hospital stay were observed between the two groups (p<0.05). However, no significance differences were observed between the three groups who were divided according to the different surgical methods (p>0.05). Conclusion: Mechanism of trauma and the severity of soft-tissue injury were significant prognostic factors affecting the surgical outcomes of Lisfranc joint fracture and dislocation.

• Journal of Radiation Protection and Research
• /
• v.46 no.4
• /
• pp.160-169
• /
• 2021

Background: Dual-energy X-ray images (DEI) can distinguish or improve materials of interest in a two-dimensional radiographic image, by combining two images obtained from separate low and high energies. The concepts of DEI performance describing the performance of double-exposure DEI systems in the Fourier domain been previously introduced, however, the performance of double-exposure DEI itself in terms of various parameters, has not been reported. Materials and Methods: To investigate the DEI performance, signal-difference-to-noise ratio, modulation transfer function, noise power spectrum, and noise equivalent quanta were used. Low- and high-energy were 60 and 130 kVp with 0.01-0.09 mGy, respectively. The energy-separation filter material and its thicknesses were tin (Sn) and 0.0-1.0 mm, respectively. Noise-reduction (NR) filtering used the Gaussian-filter NR, median-filter NR, and anti-correlated NR. Results and Discussion: DEI performance was affected by Sn-filter thickness, weighting factor, and dose allocation. All NR filtering successfully reduced noise, when compared with the dual-energy (DE) images without any NR filtering. Conclusion: The results indicated the significance of investigating, and evaluating suitable DEI performance, for DE images in chest radiography applications. Additionally, all the NR filtering methods were effective at reducing noise in the resultant DE images.

• Journal of Periodontal and Implant Science
• /
• v.51 no.4
• /
• pp.239-253
• /
• 2021

Purpose: The single-flap approach (SFA) is a minimally invasive technique with limited mucoperiosteal flap elevation to gain access to the buccal/palatal aspects, thus limiting post-surgical complications. The purpose of the present study was to gain insights into the impact of the SFA over the double-flap approach (DFA) on periodontal flap treatment outcomes and patient compliance in terms of discomfort and time taken for surgical procedures. Methods: Twenty patients with persistent probing pocket depths of ≥5 mm were scheduled for the SFA (test site) and for the DFA (control site). All the clinical periodontal parameters were recorded at baseline, 3 months, and 6 months. Radiographic bone level (cone-beam computed tomography) was evaluated at baseline and 6 months. Patients' postoperative pain perception and wound healing were also assessed. Results: The SFA showed a significant reduction in periodontal pocket depth, gain in clinical attachment level (CAL), and gain in bone level when compared with the DFA. The SFA substantially improved wound healing and induced less postoperative pain than the DFA. Conclusions: The SFA resulted in substantial improvement in the composite outcome measures, as shown by a reduction in pocket depth with minimal gingival recession, gain in CAL, early wound healing, less postoperative discomfort, and better patient-centered outcomes.

• Imaging Science in Dentistry
• /
• v.47 no.2
• /
• pp.87-92
• /
• 2017

Purpose: The aim of this study was to determine whether the panoramic mandibular index (PMI) is useful for assessing bone mineral density. We also analyzed the potential correlations between PMI parameters and patient age. Materials and Methods: Four observers measured the PMI of both sides of the mental foramen using a picture archiving and communication system and images in the Digital Imaging and Communications in Medicine format. They studied 300 panoramic radiographic images of patients belonging to the following age groups: 40-49 years, 50-59 years, 60-69 years, 70-79 years, and 80-89 years. The observers were allowed to zoom in or out and to adjust the contrast of the images. Further, they were instructed to record the reasons for any measurements that could not be made. Then, we conducted a reliability analysis of the measured PMI and assessed the correlations between different patient age groups and the 3 parameters used for determining the PMI from the available data. Results: Among the 600 data items collected, 23 items were considered unmeasurable by at least 1 observer for the following 4 reasons: postoperative state, lesion, unidentified mental foramen, and alveolar bone loss. The intraobserver reproducibility of the measurable data was 0.611-0.752. The mandibular cortical width (MCW) decreased significantly as patient age increased. Conclusion: PMI had limited usability when the margin of the mental foramen was not clear. In contrast, MCW, a parameter used for determining the PMI, had fewer drawbacks than the PMI with respect to bone mineral density measurements and exhibited a significant correlation with patient age.

• Imaging Science in Dentistry
• /
• v.41 no.2
• /
• pp.71-78
• /
• 2011

Purpose : This study was performed to determine the optimal tile size for the fractal dimension of the mandibular trabecular bone using a tile counting method. Materials and Methods : Digital intraoral radiographic images were obtained at the mandibular angle, molar, premolar, and incisor regions of 29 human dry mandibles. After preprocessing, the parameters representing morphometric characteristics of the trabecular bone were calculated. The fractal dimensions of the processed images were analyzed in various tile sizes by the tile counting method. Results : The optimal range of tile size was 0.132 mm to 0.396 mm for the fractal dimension using the tile counting method. The sizes were closely related to the morphometric parameters. Conclusion : The fractal dimension of mandibular trabecular bone, as calculated with the tile counting method, can be best characterized with a range of tile sizes from 0.132 to 0.396 mm.

• Journal of Periodontal and Implant Science
• /
• v.45 no.5
• /
• pp.169-177
• /
• 2015

Purpose: Despite the high success rates of endosseous dental implants, their placement is restricted according to the height and volume of bone available. The use of short or mini dental implants could be one way to overcome this limitation. Thus, this study aimed to compare standard, short, and mini dental implants with regard to associated clinical parameters and peri-implant crevicular fluid (PICF) levels of cathepsin-K (CTSK), RANK ligand (RANKL), and osteoprotegerin (OPG), after prosthodontic loading. Methods: A total of 78 non-submerged implants (Euroteknika, $Aesthetica^{+2}$, Sallanches, France) were installed in 30 subjects (13 male, 17 female; range, 26-62 years) who visited the clinic of the Periodontology Department, Faculty of Dentistry, Selcuk University. Sampling and measurements were performed on the loading date (baseline) and 2, 14, and 90 days after loading. Assessment of the peri-implant status for the implant sites was performed using the pocket probing depth (PPD), modified plaque index, modified gingival index, modified sulcular bleeding index, and radiographic signs of bone loss. PICF samples collected from each implant were evaluated for CTSK, RANKL, and OPG levels using the ELISA method. Keratinized tissue and marginal bone loss (MBL) were also noted. Results: Clinical parameters statistically significantly increased in each group but did not show statistical differences between groups without PPD. Although implant groups showed a higher MBL in the upper jaw, only the standard dental group demonstrated a statistically significant difference. At 90 days, the OPG:sRANKL ratio and total amounts of CTSK for each group did not differ from baseline. Conclusions: Within the limitations of this study, both short and mini dental implants were achieving the same outcomes as the standard dental implants in the early period after loading.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.2
• /
• pp.132-139
• /
• 1989

We have designed a real-time Cardiac digital substraction angiography system (C-DSA) and tested the system for the diagnosis of Cardiac patients. The system was developed by interfacing a radiographic angiography system to a computerized motional image analysis system. This new cardiac DSA can perform the real time processing of averaging and subtraction of the 32 image frames to measure the volume changes of the left ventricle after elimination of motional artrifacts, caused by the heart contraction of beats per minute in average. Each frame has a resolution of 512 x 512 pixels and 256 gray levels. Two image data with maximal and minimal volume were moved to the interfaced IBM PC computer system by high speed computer link line for computation of the heart's contraction parameters. First, the boundary of the left ventricule was detected using a dynamic programming of the gray levels, and its volume was computered to determine the parameters, such as the maximal volume of end-diastolic volume (EDV), the minimal volume of end systolic volume (ESV), and ejection fraction (EF).

• Imaging Science in Dentistry
• /
• v.39 no.4
• /
• pp.199-203
• /
• 2009

Purpose : To measure dose-width product (DWP) values used for dental panoramic radiography in Anyang city, Korea. Materials and Methods : Thirty-six panoramic dental radiographic sets (17 analogue panoramic sets and 19 digital panoramic sets) in 36 dental clinics in Anyang city were included in the study. Each patient's panoramic exposure parameters were simulated and the panoramic radiation doses were measured at the secondary collimator using a Mult-O-Meter (Unfors Instruments, Billdal, Sweden) at each dental clinic during 2006. The third quartile DWP was determined from 310 surface dose measurements on adult. Results : The third quartile DWP for adult panoramic radiograph was 106.7 mGy mm. For analogue and digital panoramic radiograph, 3/4 DWP were 116.8 mGy mm and 72 mGy mm respectively. The overall third quartile DWP of panoramic radiography was 106.7 mGy mm. Conclusion : The measured 3/4 DWPs were higher than the 3/4 DWP of 65 mGy mm recommended by NRPB. Dentists who are operating above the reference dose should lower their panoramic exposure doses below the recommended reference value by changing the exposure parameters and/or their panoramic equipments.

• Imaging Science in Dentistry
• /
• v.46 no.1
• /
• pp.17-24
• /
• 2016

Purposes: This study employed a posteriori registration and subtraction of radiographic images to quantify the apical root resorption in maxillary permanent central incisors after orthodontic treatment, and assessed whether the external apical root resorption (EARR) was related to a range of parameters involved in the treatment. Materials and Methods: A sample of 79 patients (mean age, $13.5{\pm}2.2years$) with no history of trauma or endodontic treatment of the maxillary permanent central incisors was selected. Periapical radiographs taken before and after orthodontic treatment were digitized and imported to the Regeemy software. Based on an analysis of the post-treatment radiographs, the length of the incisors was measured using Image J software. The mean EARR was described in pixels and relative root resorption (%). The patient's age and gender, tooth extraction, use of elastics, and treatment duration were evaluated to identify possible correlations with EARR. Results: The mean EARR observed was $15.44{\pm}12.1pixels$ (5.1% resorption). No differences in the mean EARR were observed according to patient characteristics (gender, age) or treatment parameters (use of elastics, treatment duration). The only parameter that influenced the mean EARR of a patient was the need for tooth extraction. Conclusion: A posteriori registration and subtraction of periapical radiographs was a suitable method to quantify EARR after orthodontic treatment, and the need for tooth extraction increased the extent of root resorption after orthodontic treatment.

• Clinical Pain
• /
• v.18 no.1
• /
• pp.8-15
• /
• 2019

Objective: To determine the relationship between cervical sagittal parameters and the degree of the cervical disc degeneration at each cervical level by using cervical plain radiographs and disc degeneration grading. Method: This study analyzed 110 patients with posterior neck pain. Cervical radiographic measurements included the occipito-cervical (O~C2) angle; sagittal Cobb angles of C1~C2, C2~C7; and sagittal vertical axis (SVA) of C1~C7 and C2~C7. The degenerations of cervical discs at each level were evaluated through Pfirrmann grading system by magnetic resonance images of the cervical spine. The correlations between the cervical sagittal measurements and the disc degeneration at each level were analyzed by Spearman's correlation. Results: A significant correlation was found for the C2~C7 angle with disc degenerations at C2~C6 levels. O~C2 angle was correlated significantly with disc degenerations at C2~C4 and C5~C7 levels. There was significant correlation between C1~C2 angle and disc degeneration at C6~C7 level. No significant relationship was found between the cervical SVA and the cervical disc degeneration at all cervical levels. Conclusion: Cervical sagittal parameters representing cervical angles (C2~C7, O~C2, and C1~C2 angles) were significantly correlated with the degree of the cervical disc degeneration. These findings suggest that the loss of the natural cervical lordosis rather than loss of natural SVA could be correlated with progression of the cervical disc degeneration.