• Journal of information and communication convergence engineering
• /
• v.17 no.4
• /
• pp.274-278
• /
• 2019

It is important that students are provided opportunities to practice their skills in acquiring radiographic images. However, these opportunities are currently limited because of the risk of radiation exposure. To overcome this limitation, a new augmented reality-based radiography simulator was developed that enables students to practice radiographic techniques as part of self-directed learning without time and space constraints. Subsequently, cross-sectional images of a manikin phantom head obtained via computed tomography were reconstructed into a three-dimensional object. An image marker that could be recognized by a mobile device and could allow users to practice dental radiography techniques was devised. The three-dimensional object was augmented to the mobile device; consequently, among 106 stored dental radiographs on the device, a radiograph corresponding to specific imaging conditions was opened when users performed radiographic procedures. This technology could improve dental students' understanding of dental anatomy and contribute to improving their competency in acquiring dental radiographs.

• Journal of Periodontal and Implant Science
• /
• v.42 no.2
• /
• pp.39-44
• /
• 2012

Purpose: Special care is necessary to avoid invading important anatomic structures during surgery when presurgical planning is made based on radiographs. However, none of these types of radiography represents a perfect modality. The purpose of this study was to determine the reliability of presurgical planning based on the use of two types of radiographic image (digital panoramic radiography [DPR] and cone-beam computed tomography [CBCT]) by beginner dentists to place implants, and to quantify differences in measurements between radiographic images and real specimens. Methods: Ten fresh cadavers without posterior teeth were used, and twelve practitioners who had no experience of implant surgery performed implant surgery after 10 hours of basic instruction using conventional surgical guide based on CBCT or DPR. Two types of measurement error were evaluated: 1) the presurgical measurement error, defined as that between the presurgical and postsurgical measurements in each modality of radiographic analysis, and 2) the measurement error between postsurgical radiography and the real specimen. Results: The mean presurgical measurement error was significantly smaller for CBCT than for DPR in the maxillary region, whereas it did not differ significantly between the two imaging modalities in the mandibular region. The mean measurement error between radiography and real specimens was significantly smaller for CBCT than for DPR in the maxillary region, but did not differ significantly in the mandibular region. Conclusions: Presurgical planning can be performed safely using DPR in the mandible; however, presurgical planning using CBCT is recommended in the maxilla when a structure in a buccolingual location needs to be evaluated because this imaging modality supplies buccolingual information that cannot be obtained from DPR.

• Restorative Dentistry and Endodontics
• /
• v.40 no.1
• /
• pp.75-78
• /
• 2015

Presented here is a case where 8 canals were located in a mandibular first molar. A patient with continuing pain in mandibular left first molar even after completion of biomechanical preparation was referred by a dentist. Following basic laws of the pulp chamber floor anatomy, 8 canals were located in three steps with 4 canals in each root. In both of the roots, 4 separate canals commenced which joined into two canals and exited as two separate foramina. At 6 mon follow-up visit, the tooth was found to be asymptomatic and revealed normal radiographic periapical area. The case stresses on the fact that understanding the laws of pulp chamber anatomy and complying with them while attempting to locate additional canals can prevent missing canals.

• Journal of Veterinary Clinics
• /
• v.14 no.1
• /
• pp.112-117
• /
• 1997

12-month-old Buldig and 3-year-old German Shepherd, treated with corticosteroids duringthe late pregnancy, were referred to the Veterinary Teaching Hospital, Chonnam National University, with chief complaints of vaginal discharge. Radiographic, ultrasonographic and surgical findings that obtained from each cases were as follows; case I: Radiographic findings were identified 2 fetuses that were normal skeleton, however, fetal viability could not be determined. Ultrasonographic findings were identified absence of fetal heartbeat and fetal movement, abnormal echogenicity of the abdominal visera, and echogenic materials remaining within the fetal fluid. After hysterotomy, macroscopic findings of uterus were liquefied materials remaining within the uterine lumen. Fetuses were excessively autolysis (falling off the hair, depression of the eye, and necrosis of the abdormal visera and skin). case II: Radiographic findings were identified irregular fetal structures and fetal movement, loss of recognizable fetal anatomy, dislocation of fetal veterbrae and echogenic materials remaining within the uterine lumen. After ovariohysterectomy, macroscopic finding of uterus and fetus were thickened uterine wall, yellowish-brown colored administration of corticosteroids during gestation should be contraindicated because fetal death is inducced. Ultrasonography has an advantage over radiography in that it permits evaluation of fetal viability.

• Journal of Korean Neurosurgical Society
• /
• v.49 no.5
• /
• pp.273-277
• /
• 2011

Objective : A single balloon extrapedicular kyphoplasty has been introduced as one of the unilateral approaches for thoracic compression fractures; however, the unilateral extrapedicular technique in the lumbar area needs a further understanding of structures in the lumbar area. The purpose of the present study is to describe methods and pitfalls of this procedure based on the anatomy of the lumbar area and to analyze clinical outcome and complications. Methods : Anatomical evaluation was performed with 2 human cadavers. A retrospective review of unilateral extrapedicular approaches yielded 74 vertebral levels in 55 patients that were treated with unilateral extrapedicular vertebroplasty and kyphoplasty. Radiographic assessment included the restoration rate of vertebral height and correction of kyphosis. Results : Anatomical evaluation indicates that the safe needle entry zone of bone for the extrapedicular approach was located in the supero-lateral aspect of the junction between the pedicle and vertebral body. The unilateral extrapedicular procedure achieved adequate pain relief with a mean decreases in pain severity of $7.25{\pm}1.5$ and $2.0{\pm}1.4$, respectively. Complications were 1 retroperitoneal hematoma, 6 unilateral fillings and 3 epidural leak of the polymethylmethacrylate. Conclusion : The method of a unilateral extrapedicular approach in kyphoplasty and vertebroplasty in the lumbar area might be similar to that in thoracic approach using a route via the extrapedicular space. However, different anatomical characteristics of the lumbar area should be considered.

• Journal of Korean Neurosurgical Society
• /
• v.51 no.1
• /
• pp.66-70
• /
• 2012

Thoracic pedicle screw fixation techniques are still controversial for thoracic deformities because of possible complications including neurologic deficit. Methods to aid the surgeon in appropriate screw placement have included the use of intraoperative fluoroscopy and/or radiography as well as image-guided techniques. We describe our technique for free hand pedicle screw placement in the thoracic spine without any radiographic guidance and present the results of pedicle screw placement analyzed by computed tomographic scan in two human cadavers. This free hand technique of thoracic pedicle screw placement performed in a step-wise, consistent, and compulsive manner is an accurate, reliable, and safe method of insertion to treat a variety of spinal disorders, including spinal deformity.

• Imaging Science in Dentistry
• /
• v.37 no.1
• /
• pp.9-14
• /
• 2007

Purpose : To determine the more valuable information to detect the mandibular canal and the mental foramen in panoramic radiographs of a selected Korean population for the implant. Materials and Methods : This study analysed 288 panoramic radiographic images of patients taken at the Dental hospital of Chosun University retrospectively. Indirect digital panoramic X-ray machine (ProlineXC, PLANMECA, Finland) with processing by using Directview $CR950^@$ (Kodak, U.S.A.) and Direct digital panoramic X-ray machine (Promax, PLANMECA, Finland) were used for all exposures. All images were converted into Dicom format. Results : The common position of the mental foramen was in line with the longitudinal axis of the second premolar (68.1%). The mental foramen was symmetrical in 81.8% of cases. The mandibular canal was not identified at anterior portion and discontinued with the mental foramen in 27.8% of all cases, in 42.4% identified with lower border line continued with the mental foramen, in 14.6% with both upper and lower border lines, and in 15.3% unilaterally identified with lower border line. Conclusion : Clinicians can estimate the upper border line of the mandibular canal from the confirmation of the mental foramen and the lower border line of the mandibular canal symmetrically on the panoramic radiography taken in adjusted midsaggital plane of patient's head.

• Journal of Periodontal and Implant Science
• /
• v.36 no.1
• /
• pp.147-154
• /
• 2006

Surgical intervention in the posterior maxillary region requires detailed knowledge of maxillary sinus anatomy and the possible anatomical variations. This study evaluated the incidence, location of maxillary sinus septa by using radiographic (panoramic radiography and computed tomography) findings and comparison of panoramic radography with CT in antral anatomical variation. This study was based on data from 70 sinuses in partial dentate maxilla. The sample consisted of 61 patients(25 women and 36 men, with ages ranging between 19 and 77 years and a mean age of $49.4{\pm}11.3$ years) who were being treatment-planned to receive implant-supported restorations. First, the panoramic images were examined for the presence of antral septa by radiologist and examiner who don't know about CT findings. And incidence of antral septa was evaluated using an axial plane of CT image. The incidence of septa was compared between panoramic radiography and CT. The accuracy of the incidence was compared between radiologists and dentists. A total of 20 septa were found in 70 sinuses on CT image and the prevalence of one or more septa per sinus was found to be 28.6%. The assumed incidence of septa on panoramic radiography was $27.6%{\pm}2.2%$ in radiologist and $31.9%{\pm}5.8%$ in dentists. Erroneous diagnosis rate was 11.42% in radiologist and 15.96% in dentists. 40% of antral septa were located in the anterior(premolar) region, 30% of septa were located in the middle(first molar) and posterior(second molar) region separately. Prior to implant placement, it seems appropriate to consider panoramic radiography as a standard radiographic examination and periapical radiographs may be used to complete the findings in regions not sharply depicted in the panoramic radiograph. And cross-sectional imaging should be used in sites with severe bone loss and close proximity of the maxillary sinus.

• Restorative Dentistry and Endodontics
• /
• v.42 no.1
• /
• pp.60-64
• /
• 2017

Root canal anatomy is complex, and the recognition of anatomic variations could be a challenge for clinicians. This case report describes the importance of cone beam computed tomographyic (CBCT) imaging during endodontic treatment. A 23 year old woman was referred by her general dental practitioner with the chief complaint of spontaneous pain in her right posterior maxilla. From the clinical and radiographic findings, a diagnosis of symptomatic irreversible pulpitis was made and endodontic treatment was suggested to the patient. The patient underwent CBCT examination, and CBCT scan slices revealed seven canals: three mesiobuccal (MB1, MB2, and MB3), two distobuccal (DB1 and DB2), and two palatal (P1 and P2). Canals were successfully treated with reciprocating files and filled using single-cone filling technique. Precise knowledge of root canal morphology and its variation is important during root canal treatment. CBCT examination is an excellent tool for identifying and managing these complex root canal systems.

• Restorative Dentistry and Endodontics
• /
• v.40 no.1
• /
• pp.79-84
• /
• 2015

This case report presents surgical endodontic management outcomes of maxillary incisors that were infected via the lateral canals. Two cases are presented in which endodontically-treated maxillary central incisors had sustained lateral canal infections. A surgical endodontic treatment was performed on both teeth. Flap elevation revealed vertical bone destruction along the root surface and infected lateral canals, and microscopy revealed that the lateral canals were the origin of the lesions. After the infected lateral canals were surgically managed, both teeth were asymptomatic and labial fistulas were resolved. There were no clinical or radiographic signs of surgical endodontic management failure at follow-up visits. This case report highlights the clinical significance and surgical endodontic management of infected lateral canal of maxillary incisor. It is important to be aware of root canal anatomy variability in maxillary incisors. Maxillary central incisors infected via the lateral canal can be successfully managed by surgical endodontic treatment.