• 제목/요약/키워드: Radioactive isotope

검색결과 124건 처리시간 0.028초

MCNPX 코드를 이용한 의료용 방사성동위원소 생산을 위한 가속기 시설의 방사선차폐 및 선량 계산 (Shielding Calculations of Accelerator Facility for Medical Isotope Production using MCNPX Code)

  • 서규석;김찬형
    • 한국의학물리학회지:의학물리
    • /
    • 제15권4호
    • /
    • pp.210-214
    • /
    • 2004
  • PET에 사용되는 조영제는 생산과정 중에 다량의 중성자가 발생한다. 발생된 중성자는 주로 콘크리트 구조물로 차폐를 하게 되며 가속기 시설의 차폐 평가는 구조물 외부로 방출되는 방사선의 선량을 측정하게 된다. 즉 콘크리트를 통과하면서 에너지를 잃은 중성자와 콘크리트를 이루는 물질과 중성자간의 상호작용으로 생성되는 광자의 선량을 측정하여 선량을 평가하게 된다. MCNPX 코드2)를 이용하여 가속기 시설의 콘크리트 구조물 외부로 방출되는 중성자 선량과 광자선량을 계산한 결과, 원자력법에서 정한 법정 제한 선량에 훨씬 못 미치는 것을 알 수 있었다.

  • PDF

Investigation of 180W separation by transient single withdrawal cascade using Salp Swarm optimization algorithm

  • Morteza Imani;Mahdi Aghaie
    • Nuclear Engineering and Technology
    • /
    • 제55권4호
    • /
    • pp.1225-1232
    • /
    • 2023
  • The 180W is the lightest isotope of Tungsten with small abundance ratio. It is slightly radioactive (α decay), with an extremely long half-life. Its separation is possible by non-conventional single withdrawal cascades. The 180W is used in radioisotopes production and study of metals through gamma-ray spectroscopy. In this paper, single withdrawal cascade model is developed to evaluate multicomponent separation in non-conventional transient cascades, and available experimental results are used for validation. Numerical studies for separation of 180W in a transient single withdrawal cascade are performed. Parameters affecting the separation and equilibrium time of cascade such as number of stages, cascade arrangements, feed location and flow rate for a fixed number of gas centrifuges (GC) are investigated. The Salp Swarm Algorithm (SSA) as a bio-inspired optimization algorithm is applied as a novel method to minimize the feed consumption to obtain desired concentration in the collection tank. Examining different cascade arrangements, it is observed in arrangements with more stages, the separation is further efficient. Based on the obtained results, with increasing feed flow rate, for fixed product concentration, the cascade equilibrium time decreases. Also, it is shown while the feed location is the farthest stage from the collection tank, the separation and cascade equilibrium time are well-organized. Finally, using SSA optimal parameters of the cascade is calculated, and optimal arrangement to produce 5 gr of 180W with 90% concentration in the tank, is proposed.

방사화 표적물질 운반용기 설계 연구 (A Study on Design of Transport Container for Radio-activated Targets)

  • 박혜민;김태영;김해영;송양수;이운장;조원제;정명환
    • 방사선산업학회지
    • /
    • 제17권2호
    • /
    • pp.191-197
    • /
    • 2023
  • Abstract KOMAC(Korea Multi-Purpose Accelerator Complex, KAERI) has been operating a 100 MeV proton accelerator and is going to produce 68Ga isotope which is useful for diagnosis of cancer. So, it is necessary to develop a transport container for radio-activated targets. In this study, we carry out shielding analysis and structural analysis for the radio-activated target transport container using simulation programs. According to the Type A standard, the transport container includes an inner container and an overpack container. The main material of inner container is lead, and the shape is cylindrical with diameter of 152mm, height of 142mm and weight about 29 kg. It is planned to verify the possibility of field application through production of the transport container prototype in the future.

방사성물질 수송용기 충격완충제 케이스의 좌굴변형에 의한 충격흡수효과 (Impact energy absorbing effect by the buckling of impact limiter's case of radioactive material transport cask)

  • 구정회;서기석;민덕기;김영진
    • 대한기계학회논문집A
    • /
    • 제22권4호
    • /
    • pp.826-833
    • /
    • 1998
  • The energy-absorbing characteristic of impact limiters affects the cask design so significantly that it should be evaluated as accurate as possible. The objective of this study is to find the influence of the impact limiter's steel case and gusset plates which enclose the shock absorbing cellular material on the impact energy absorption. The influence of impact limiter's steel case and gusset plate stiffeners on the impact energy absorption behavior under horizontal drop impact was evaluated for a radioactive isotope transport cask. Though the impact limiters mitigate the impact damage of the cask, the impact limiter's steel case and gusset plate stiffeners increase the impact force so significantly that should be designed as soft as possible. The impact analysis without considering impact limiter's steel case and gusset plates stiffener gives non-conservative results, so the stiffness of the steel case and gusset plates should be considered in impact analysis.

기반암에 따른 토양가스 222Rn농도의 분포에 관한 기초연구 (A Preliminary Study on Soil-Gas 222Rn Concentrations Depending on Different Bedrock Geology)

  • 제현국;강치구;전효택
    • 자원환경지질
    • /
    • 제31권5호
    • /
    • pp.415-424
    • /
    • 1998
  • In order to investigate soil-gas $^{222}Rn$ concentrations, Kwanak Campus (Seoul National University), Boeun (Choong-buk) and Gapyung (Kyonggi) areas were selected and classified depending on their base rock types. Radon risk indices of these study areas decrease in the order of Gapyung>Kwanak Campus>Boeun areas, and in the order of rock type as banded gneiss>granite gneiss>granite>black slate-shale>mica schist>shale-lirnestone>phyllite-schist. Radon emanating trends with water content and grain size of soils were assessed by modified Morse 3 min. method. Radon emanation increases with the increase of water content in soils which is lower than 6~16 wt.%, and decreases in the range of higher than 6-16 wt. %. It shows that Rn emanation increases with the decrease of soil grain size. Radioactivity analysis of radionuclides of 238U series in some soil samples shows that radioactive disequilibrium state between $^{226}Ra$ and $^{238}U$ exists owing to different geochemical behavior of each radionuclide, and, it is necessary to carry out radioactive isotope geochemical approach for soil-gas $^{222}Rn$ study.

  • PDF

Overview of CSNS tantalum cladded tungsten solid Target-1 and Target-2

  • Wei, Shaohong;Zhang, Ruiqiang;Ji, Quan;Li, Changfeng;Zhou, Bin;Lu, Youlian;Xu, Jun;Zhou, Ke;Zhao, Chongguang;He, Ning;Yin, Wen;Liang, Tianjiao
    • Nuclear Engineering and Technology
    • /
    • 제54권5호
    • /
    • pp.1535-1540
    • /
    • 2022
  • A solid tungsten target was used at the China Spallation Neutron Source (CSNS) with 100 kW proton beam power. To improve the lifetime, hot isostatic pressing (HIP) process was selected to bond tantalum cladding with tungsten plates. Radioactive isotope 182Ta, an activation product of tantalum, was found in the cooling water after a period of operation, however, no radioactive isotopes of 187W was found, which shows the tantalum layer remained mostly intact. The CSNS Target-1 had been operating safely for three years and was replaced by Target-2 in August 2020.

핵의학과 혈액검사실의 안전 관리 활동에 대한 고찰 (Study on Safety Management Activity of Blood Test Room of Nuclear Medicine Department)

  • 심성재;신영균;문형호;유선희;조시만
    • 핵의학기술
    • /
    • 제15권2호
    • /
    • pp.104-110
    • /
    • 2011
  • Purpose: 최근 의료기관에 대한 객관적인 평가방법은 의료기관 인증제도를 시행하여 의료서비스에 대한 수요자의 신뢰성을 높이고 있다. 또한 핵의학 검사실과 진단검사의학 검사실도 국제적인 여러 종류의 인증제도를 채택하면서 검사실내의 안전관리에 관한 사항이 중요시 되고 있다. 핵의학과 혈액검사실에서도 검체에 의한 감염 및 방사성 동위원소시약을 비롯한 여러 유해환경에 노출되어 있으므로 직원 및 환자의 안전관리 영역에 많은 관심이 요구된다. 이에 본원 핵의학과 혈액검사실에서 실시하고 있는 직원 및 환자의 안전관리 활동에 대해 논해 보고자 한다. Material & Method: 본원 핵의학과 혈액검사실에서는 안전관리 책임자에 의해 전반적인 안전관리 사항이 제시되고 검사실 모든 직원이 이를 업무에 적용하고 있다. 정해진 규정에 따라 안전관리 교육을 정기적으로 실시하고 있으며, 검사 업무 중에는 개인 보호구 착용 및 손 위생을 시행하여 감염을 예방하고 있다. 또한 기술적 안전지침과 정전으로 발생되는 사고지침을 통해 유사시에 대비하고 있다. 감염관리 지침을 통해 감염 예방 및 감염 시 대비 요령을 숙지하고 방사성 동위원소 관리, 시약 사용에 대한 안전관리 및 유해화학 물질에 대한 안전 지침을 업무에 적용하고 있다. Result: 핵의학과 혈액검사실에서는 안전관리 규정을 업무에 적용하고 있다. 손 위생을 실시해야 하는 상황에서 손 씻기를 시행하여 직원 및 환자 간 감염을 예방하고 있으며, 검체에 의한 감염을 예방하고자 개인 보호구 착용을 하고 있다. 혈액검사실 내에서 사용하고 있는 시약에서 유해물질로 분류된 시약은 쉽게 알아 볼 수 있도록 분리하여 보관하며 방사성 폐기물 및 일반 의료 폐기물도 효율적으로 안전한 관리를 하고 있다. 이와 같은 많은 안전관리 활동을 통해 직원들은 안전관리 의식이 향상 되었으며 환자들은 여러 위험으로부터 보호되고 있다. Conclusion: 핵의학과 혈액검사실 직원은 안전관리에 대한 규정을 충분히 숙지하고 업무에 적용해야 한다. 더 나은 안전관리에 대한 제안이 나오면 검토하여 적용하고 직원 및 환자의 안전관리에 대한 질적 향상을 높여야 할 것으로 사료된다.

  • PDF

Application of peak based-Bayesian statistical method for isotope identification and categorization of depleted, natural and low enriched uranium measured by LaBr3:Ce scintillation detector

  • Haluk Yucel;Selin Saatci Tuzuner;Charles Massey
    • Nuclear Engineering and Technology
    • /
    • 제55권10호
    • /
    • pp.3913-3923
    • /
    • 2023
  • Todays, medium energy resolution detectors are preferably used in radioisotope identification devices(RID) in nuclear and radioactive material categorization. However, there is still a need to develop or enhance « automated identifiers » for the useful RID algorithms. To decide whether any material is SNM or NORM, a key parameter is the better energy resolution of the detector. Although masking, shielding and gain shift/stabilization and other affecting parameters on site are also important for successful operations, the suitability of the RID algorithm is also a critical point to enhance the identification reliability while extracting the features from the spectral analysis. In this study, a RID algorithm based on Bayesian statistical method has been modified for medium energy resolution detectors and applied to the uranium gamma-ray spectra taken by a LaBr3:Ce detector. The present Bayesian RID algorithm covers up to 2000 keV energy range. It uses the peak centroids, the peak areas from the measured gamma-ray spectra. The extraction features are derived from the peak-based Bayesian classifiers to estimate a posterior probability for each isotope in the ANSI library. The program operations were tested under a MATLAB platform. The present peak based Bayesian RID algorithm was validated by using single isotopes(241Am, 57Co, 137Cs, 54Mn, 60Co), and then applied to five standard nuclear materials(0.32-4.51% at.235U), as well as natural U- and Th-ores. The ID performance of the RID algorithm was quantified in terms of F-score for each isotope. The posterior probability is calculated to be 54.5-74.4% for 238U and 4.7-10.5% for 235U in EC-NRM171 uranium materials. For the case of the more complex gamma-ray spectra from CRMs, the total scoring (ST) method was preferred for its ID performance evaluation. It was shown that the present peak based Bayesian RID algorithm can be applied to identify 235U and 238U isotopes in LEU or natural U-Th samples if a medium energy resolution detector is was in the measurements.

30 MeV 사이클로트론 시설 위험성 평가 (Risk Assessment of 30 MeV Cyclotron Facilities)

  • 정교성;김종일;이진우
    • 방사선산업학회지
    • /
    • 제11권1호
    • /
    • pp.39-45
    • /
    • 2017
  • A cyclotron is a kind of particle accelerator that produces a beam of charged particles for the production of medical, industrial, and research radioisotopes. More than 30 cyclotrons are operated in Korea to produce $^{18}F$, an FDG synthesis at hospitals. A 30-MeV cyclotron was installed at ARTI (Advanced Radiation Technology Institute, KAERI) mainly for research regarding isotope production. In this study, we analyze and estimate the items of risk such as the problems in the main components of the cyclotron, the loss of radioactive materials, the leakage of coolant, and the malfunction of utilities, fires and earthquakes. To estimate the occurrence frequency in an accident risk assessment, five levels, i.e., Almost certain, Likely, Possible, Unlikely, and Rare, are applied. The accident consequence level is classified under four grades based on the annual permissible dose for radiation workers and the public in the nuclear safety law. The analysis of the accident effect is focused on the radioactive contamination caused by radioisotope leakage and radioactive material leakage of a ventilation filter due to a fire. To analyze the risks, Occupation Safety and Health Acts is applied. In addition, action plans against an accident were prepared after a deep discussion among relevant researchers. In this acts, we will search for hazard and introduce the risk assessment for the research 30-MeV cyclotron facilities of ARTI.

Measurement of 137Cs in Ice Core Samples from Antarctica

  • Lim, S.I.;Kim, D.H.;Huh, J.Y.;Lee, J.;Hahn, I.S.;Han, Y.C.;Hur, S.D.;Hwang, H.J.;Kang, W.G.;Kim, Y.D.;Lee, E.K.;Lee, M.H.
    • Journal of the Korean Physical Society
    • /
    • 제73권9호
    • /
    • pp.1263-1268
    • /
    • 2018
  • Three different ice core samples from Antarctica were analyzed to identify activity concentrations of radioactive isotopes. Tracking migration of radioactive isotopes to Antarctica can provide a key clue to understand global environmental changes caused by radiation exposures because the Antarctic ice cores can preserve unique characteristics of various environmental conditions. We are particularly interested in the $^{137}Cs$ nucleus, because it is closely related to radiation exposure from nuclear power plant accidents and nuclear bomb tests. With its half life of $30.17{\pm}0.03$ years, $^{137}Cs$ can also be used to assess the age of sedimentation occurring after around the year 1945. We selected three ice core samples, called Tarn8, Styx27, and H25, from different time periods; the Tarn8 sample is known to be from earlier than ~ 1000 AD, the Styx27 sample is approximately from the year 1945, and the H25 sample is from the year 2012. Radioactive isotope measurements of the ice core samples were performed using a 100% HPGe detector at Cheongpyeong Underground Radiation Laboratory (CURL). We measured the activity of $^{137}Cs$ in the H25 sample to be $0.98{\pm}0.82mBq/kg$. Although the activity has a large uncertainty mainly due to the limited sample quantity, the $^{137}Cs$ isotopes in the Antarctic ice core were measured for the first time in Korea.