• Journal of the Korea Society of Computer and Information
• /
• v.17 no.5
• /
• pp.137-146
• /
• 2012

In SCM(Supply Chain Management), a management paradigm where the customer satisfaction is to be achieved by minimizing the cost, reducing the uncertainty, and obtaining the overall optimization. As it performs the integrated operation of the paths of information, assets, and knowledge from the raw material providers to the retailers, the adoption of RFID(Radio Frequency Identification) in SCM could be expected to magnify the effectiveness of the system. However, there is a huge risk by deciding whether or not RFID system is adopted without the objective analysis under the uncertain circumstances. This research paper presents the statistical analysis methodologies for the comparison of RFID with Barcode on the aspect of utility and the statistical analysis tool, RUSAT, which was programmed for nonstatisticians' convenience. Assuming a pharmaceutical industry, this paper illustrates how the data were entered and analyzed in RUSAT. The results of this research are expected to be used not only for the pharmaceutical related company but also for the manufacturer, the whole-saler, and the retailer in the other logistic industries.

• Journal of Computing Science and Engineering
• /
• v.6 no.1
• /
• pp.40-50
• /
• 2012

Increase in the number of older people due to demographic changes poses great challenges to the social healthcare systems both in the Western and as well as in the Eastern countries. Support for older people by formal care givers leads to enormous temporal and personal efforts. Therefore, one of the most important goals is to increase the efficiency and effectiveness of today's care. This can be achieved by the use of assistive technologies. These technologies are able to increase the safety of patients or to reduce the time needed for tasks that do not relate to direct interaction between the care giver and the patient. Motivated by this goal, this contribution focuses on applications of acoustic technologies to support users and care givers in ambient assisted living (AAL) scenarios. Acoustic sensors are small, unobtrusive and can be added to already existing care or living environments easily. The information gathered by the acoustic sensors can be analyzed to calculate the position of the user by localization and the context by detection and classification of acoustic events in the captured acoustic signal. By doing this, possibly dangerous situations like falls, screams or an increased amount of coughs can be detected and appropriate actions can be initialized by an intelligent autonomous system for the acoustic monitoring of older persons. The proposed system is able to reduce the false alarm rate compared to other existing and commercially available approaches that basically rely only on the acoustic level. This is due to the fact that it explicitly distinguishes between the various acoustic events and provides information on the type of emergency that has taken place. Furthermore, the position of the acoustic event can be determined as contextual information by the system that uses only the acoustic signal. By this, the position of the user is known even if she or he does not wear a localization device such as a radio-frequency identification (RFID) tag.

• Journal of the Society of Disaster Information
• /
• v.11 no.1
• /
• pp.73-88
• /
• 2015

Due to the cases of recent global warming and unusual weather etc., large-scale natural disasters such as typhoons, floods, snow damage occur frequently across the continents such as Southeast Asia and North America, South America etc. and risks of earthquakes and tsunami are also increasing gradually in Korea which has been regarded as a safe zone and disaster types are also being diversified such as typhoons, floods, heat waves, heavy snow and damage scale is also enlarged. In addition, due to geographical characteristics or lack of infrastructure, disasters tended to occur intensively around a specific region or city in the past but disasters occur throughout the country in recent years so preparation for disaster prevention has emerged as an urgent challenge issue. Therefore, considering that the plan of obtaining the effective feedback function of disaster Information is very important in the proactive and software aspects for disaster reduction, this paper analyzed this three aspects of contents, procedural and contextual aspects and proposed the plan. First, in the content aspect, building disaster prevention information communication Infrastructure, building urban and regional disaster prevention system, obtaining concurrency and sharing of information and second, in the procedural aspect, active utilization of ICT(Information and Communication Technology) of the prevention stage, disaster prevention information collection and analysis reinforcement of the preparation stage, improvement of decision-making structure and field command system of the response stage, recovery system related information promotion of the recovery stage were proposed as alternatives and finally, in the contextual aspect, if disaster prevention information is effectively managed through maintenance of disaster prevention information related systems, obtaining domainality by disaster prevention work, improvement of the ability to judge the situation, obtaining comprehensive and feedback function etc, it is considered to significantly contribute to reducing natural disasters.

• Journal of Biosystems Engineering
• /
• v.38 no.4
• /
• pp.295-305
• /
• 2013

Purpose: Recent research showed that total mixed ration (TMR) feeding for pigs improved the productivity and reduced feed cost and manure odor. An automatic TMR feeding system was developed for this study because the conventional feeder cannot deliver the TMR containing roughage. Methods: Conventional feeding systems and physical properties of TMR were surveyed, and performance tests of the conventional feeder were conducted to develop a TMR feeder. Based on the TMR feeder was developed and installed, driving, measuring weight, radio frequency identification (RFID) reading, and discharging test for feeding were conducted to ensure the performance. Results: Moisture content, density, and angle of repose of the TMR 1 (mixture of 30% cut IRG silage and 70% concentrates) were 31.6%, 387 $kg/m^3$, and $51^{\circ}$, respectively. Moisture content, density, and angle of repose of the TMR 2 (mixture of 45% concentrates, 30% cut IRG silage and by-products, 10% bean curd refuse, 10% others, and 5% fermenter) were 22.2%, 544 $kg/m^3$, and $50^{\circ}$, respectively. The coefficient of variation (C.V.) of conventional concentrate feeding were 1.9~4.1%, and C.V. of TMR containing 1~3% cut IRG roughage feeding by conventional feeder were 9~42%. The conventional disc type feeder was not suitable for TMR feeding because the supply unit was clogged. The C.V. of TMR 1 was 0.6~7.9% when 0.5~10 kg of the TMR supplied, and it was suitable for feeding grow-finish pigs and sows. On the contrary, the C.V. with TMR 2 was 28% when 0.5 kg of the TMR supplied, and it was not suitable for feeding sows. Conclusions: The TMR feeder developed in this study was suitable for feeding grow-finish pigs because the feeder performed stably with over 5.0 kg feed. However, the feeder showed a lack of accuracy for feeding sows because the amount of each feed was more than 0.5 kg per a feeding. Therefore, the improvement of outlet structure for accurate feeding is needed for sow feeding.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.06c
• /
• pp.274-276
• /
• 2006

e-seal은 RFID(Radio Frequency IDentification) 기술을 사용하여 원격에서 자동으로 봉인상태를 확인할 수 있는 컨테이너 봉인 장치를 말한다. RFID의 특징상 반도체 칩에 기록된 정보를 제 삼자가 쉽게 판독 및 변조할 수 있다는 취약점으로 인하여 활성화되지 못하고 있는 실정이다. ISO에서는 RFID의 취약점을 보안하기 위한 표준작업(ISO 18185)을 진행 중이다. 이 중, ISO 18185-4는 e-seal에 저장되는 자료나 리더와의 RF통신에서 데이터 보호를 위한 표준이다. 이와 관련된 연구로는 인증 프로토콜과 ISO 18185-4를 위한 보고서로 제출된 보안 프로토콜이 있다. 제안된 e-seal 보안 프로토콜을 적용하기 위해서는 e-seal과 리더 간의 데이터를 암/복호화할 키가 필요하지만, 키 서버를 통해 전달받은 마스터 키를 데이터 암/복호화 키로 바로 사용하는 것은 보안 상의 문제점을 야기할 수 있기 때문에 PRF(Pseudo Random Function)을 이용하여 마스터 키로부터 MTK(Mutual Transient Key)를 유도하고, MTK를 암/복호화 키로 사용해야 한다. 기존의 PRF는 일방향 해시 함수(MD5, SHA 등)를 기반으로 하는 HMAC[2. 3]을 일반적으로 사용하였다. 그러나 일방향 해시 함수는 e-seal과 같은 제한된 자원을 갖는 환경에 적합하지 않다. 따라서, 본 논문에서는 e-seal 보안 프로토콜을 위한 효율적인 PRF을 제안한다. 기존의 일방향 해시 함수 기반이 아닌 블록 암호화 알고리즘을 기반으로 하는 MAC을 이용하여 PRF을 보다 효율적으로 구현하였고, 블록 암호화 알고리즘은 AES를 선택 합성체 $GF((2^4)^2)$을 통해 하드웨어 모듈을 최적화 하였다. AES를 기반으로 하는 MAC은 HMAC에 비해 면적 및 처리율에서 뛰어난 결과를 보여주었다.<0.01).이상의 연구 결과, cook-chill생산 시 녹차 추출물의 첨가가 미생물적 품질유지에 효과가 있다고 사료되는 바 본 연구결과를 기초로 급식소에서 음식 생산 시 녹차 추출물 및 천연 항균성 물질 첨가에 따른 미생물적 품질 및 관능적 품질검사를 통한 레시피 개발에 관한 지속적인 연구가 수행되어야 하겠다.다.다리다보니 점심시간을 활용할 수 없게 되는 문제점에 대한 재검토가 필요하다. 따라서 차후 학교급식의 안전성 확보를 위한 급식환경 개선의 일환으로 식당공간 확보 시 신속한 시간 내에 급식이 가능하도록 넓은 공간과 쾌적한 환경의 식당 조성에 대해 관심을 기울여야 할 것으로 사료된다. 이상 여부를 반영하는 임상증상의 빈도가 높은 청소년기 남녀 중학생의 경우 아침과 저녁의 결식빈도 및 외식과 간식의 빈도가 높았고, 아침식사의 질과 체형만족도가 낮은 것으로 나타나 청소년의 건강과 식습관 및 체형만족도가 상호 관련성이 높은 것으로 나타났다. 따라서 본 연구 결과는 성장기 청소년의 건강 유지를 위하여 바람직한 식습관의 중요성을 재인식할 수 있었으며, 올바른 식습관 확립을 위한 영양교육의 중요성이 재확인되었다.경제적일 것으로 판단된다.er 90 % of good relative dynamic modulus of elasticity due to fineness of formation caused by the increase of the unit powder content and the improvement of flowability, without regard to the replacement of crushed stone fines. Therefore, it can be said that the usage of crushed stone fines can control the strength of super flowing concrete by replacement and re

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.6
• /
• pp.111-120
• /
• 2010

Looking at the application examples related to RFID systems around the world, it is easy to find that RFID systems are introduced in various industries, such as retail and consumer goods sectors, financial and security sectors, automotive and transport sector, leisure and sports sector, logistics, and health-related fields. This is because they can get their operational efficiency and competitiveness by means of product's visibility and transparency of information through RFID systems. However, it is required that evaluation of effectiveness on introducing RFID systems should be performed to strengthen construction willingness of RFID systems before actual introduction of the RFID systems in the process. This activity affects to introduction of RFID systems in industry-wide and then, will be able to create a synergy effect such as national industrial competitiveness improvement. The purpose of this study is to offer rational method on effectiveness analysis before and after RFID based process. Accordingly, the proposed Choquet fuzzy integral-based model will be allowed rational analysis by integrating quantitative and qualitative analysis. Through the effectiveness analysis of C company's RFID based process using the proposed evaluation model, we could identify that RFID-based logistics process was more effective than existing process.

• Journal of Digital Convergence
• /
• v.15 no.7
• /
• pp.147-157
• /
• 2017

Recently, ICT Retail Convergence(IRC) has been rapidly increasing to improve consumer satisfaction and consumer experience. In this paper, we aim to diagnose IRC from consumers' point of view by reviewing the present status and value of IRC according to consumer purchase decision making process. Based on the previous studies in retail industry, we classified IRC into 4 types: Experience-specific tech(Virtual Reality and Augmented Reality); Information-specific tech(Artificial Intelligence and Big Data); Location-based tech(Radio Frequency Identification and Beacon); Payment-related tech(Fin-tech and Biometrics). Next, we found that there is a difference in value provided to consumers according to the type of technology, analysing the value by consumer purchase decision making process. This study can be useful to introduce IRC for improving consumer satisfaction as well as ICT and Retail. Also, it can be basic data for future technology studies with a consumer perspective.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.12
• /
• pp.1318-1327
• /
• 2012

With the recent increased risk of livestock disease spread and human infection, livestock disease control has become very important. Consequently, there has been an increased attention on an implantable real-time monitoring and traceability system for individual cattle. Therefore, we have developed a robust monitoring and traceability system based on an implantable MFAN/RFID sensor tag. Our design combines the MFAN technology that is capable of robust wireless communication within cattle sheds and the 900MHz RFID technology that is capable of wireless communication without battery. In MFAN/RFID implantable sensor tag monitoring system, UHF sensor tag is implanted under the skin and accurately monitors the body temperature and biological changes without being affected by external environment. In order to acquire power needed by the tag, we install a MFAN/RFID tranceiver on the neck of cattle. The MFAN coordinator passes through the MFAN node and the RFID-reader-combined MFAN/RFID transceiver and transmits/receives the data and power for the sensor tag. The data stored in the MFAN coordinator is transmitted via the internet to the livestock history monitoring system, where it is stored and managed. By developing this system, we hope to alleviate the problems related to livestock disease control.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.1
• /
• pp.120-130
• /
• 2012

As long span and complex bridges are constructed often recently, safety estimation became a big issue. Various types of measuring instruments are installed in case of long span bridge. New wireless technologies for long span bridges such as sending information through a gateway at the field or sending it through cables by signal processing the sensing data are applied these days. However, The case of occurred accidents related to bridge in the world have been reported that serious accidents occur due to lack of real-time proactive, intelligent action based on recognition accidents. To solve this problem in this study, the idea of "communication among things", which is the basic method of RFID/USN technology, is applied to the bridge monitoring system. A sensor node module for USN based intelligent bridge system in which sensor are utilized on the bridge and communicates interactively to prevent accidents when it captures the alert signals and urgent events, sends RF wireless signal to the nearest traffic signal to block the traffic and prevent massive accidents, is designed and tested by performing TinyOS based middleware design and sensor test free Space trans-receiving distance.

• Journal of Information Management
• /
• v.40 no.1
• /
• pp.69-86
• /
• 2009

The biggest paradigm of the latest telecommunications is ubiquitous computing. It is a technology basis to realize ubiquitous society that would affect social, economical and cultural industries with positive influence. However, there is a simultaneous concern that the approach to ubiquitous society may violate one's privacy. Therefore, the existence of legal and technological regulation would be the biggest obstacle in further RFID technology and industry dissemination. Also, in business side, they must invest with enormous expense and technology if technological method is only approached for the solution. As in the research, 8 RFID applications, application process and inspection items and 85 appraisal list of "An impact assessment for the privacy protection in RFID applications" developed by P. K. Han(2006), will be used as an indicator to measure RFID privacy impact assessment. In addition, it is to develop RFID privacy impact assessment index by applying objective data with survey of applied specialists. This would provide a data with feasibility and reliability to RFID related companies and able to utilize policy making on RFID private data. In addition, it is expected to contribute as an efficiency tool for individual data to build basis of ubiquitous society.