• 한국초전도학회:학술대회논문집
• /
• v.14
• /
• pp.9-9
• /
• 2004

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.115-120
• /
• 2005

A c-band microwave radiometer receiver for river mouth water temperature remote sensing was designed and implemented The developed receiver operated at 5.1GHz frequency with 70MHz bandwidth. It had high gain of 50dB and low noise figure of 2dB. Also we executed efficiency evaluation about detection capability of the receiver with noise source similar input signal. The experiment results showed that the c-band receiver successfully detected the antenna temperature range from 193K to 300K.

• Journal of IKEEE
• /
• v.17 no.2
• /
• pp.176-181
• /
• 2013

This paper presents a CMOS impulse radio ultra-wideband (IR-UWB) receiver implemented using IBM 0.13um CMOS technology for inner/inter-chip wireless interconnection. The IR-UWB receiver is based on the non-coherent architecture which removes the complexity of RF architecture (such as DLL or PLL) and reduces power consumption. The receiver consists of three blocks: a low noise amplifier (LNA) with active balun, a correlator, and a comparator. Simulation results show the die area of the IR-UWB receiver of 0.2mm2, a power gain (S21) of 12.5dB, a noise figure (NF) of 3.05dB, an input return loss (S11) of less than -16.5dB, a conversion gain of 18dB, a NFDSB of 22. The receiver exhibits a third order intercept point (IIP3) of -1.3dBm and consumes 22.9mW of power on the 1.4V power supply.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.4
• /
• pp.301-308
• /
• 1991

In this paper, we have proposed a demodulation circuit of radio data receiver system and calculated the error probability of the digital transmitted signal corrupted under noise environment. And we have evaluated the error performance of the proposed system. The designed demodulation circuits have been implemented by using the general random logic and PLL circuits, which can be possible for the integrated circuit design of the radio data receiver system. In addition calculation of bit error rate in recovered digital signal has been accomplished ans we have confirmed that the proposed system hsa the equivalent performance with already existing ones.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.9
• /
• pp.67-75
• /
• 1994

In this paper, we manufactured the continuum receiver system for observing the continuum waves emitted from the continuum sources with using the 14m radio-telescope. The receiving system measures the total power of the continuum sources and consists of DC-amplifier, beam-chopper system. Phase-Locked Loop(PLL) circuit, blanking circuit and its period selection circuit, V/F converter, and counter part which are capable of interfacing with the computer which is used for a data acquisition and making the radio-telescope track the source. We compared the obsevation results which use the existing DVM method with the observation results which use the continuum receiver to measure the total power of the sources. Moreover, by method of beam switching observation which uses newly installed beam chopper system. We can significantly improve the observational efficiency more than the existing position switching observation method.

• ETRI Journal
• /
• v.26 no.5
• /
• pp.443-451
• /
• 2004

Since the publication of Alamouti's famous space-time block code, various quasi-orthogonal space-time block codes (QSTBC) for multi-input multi-output (MIMO) fading channels for more than two transmit antennas have been proposed. It has been shown that these codes cannot achieve full diversity at full rate. In this paper, we present a simple feedback scheme for rich scattering (flat Rayleigh fading) MIMO channels that improves the coding gain and diversity of a QSTBC for 2$^n$ (n=3, 4, ${\cdots}$) transmit antennas. The relevant channel state information is sent back from the receiver to the transmitter quantized to one or two bits per code block. In this way, signal transmission with an improved coding gain and diversity near to the maximum diversity order is achieved. Such high diversity can be exploited with either a maximum-likelihood receiver or low-complexity zero-forcing receiver.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.8
• /
• pp.1-9
• /
• 1992

Radio data system is a next-generation broadcasting system of digital information communication which multiplexes the digital data into the FM stereo signal in VHF/FM band and provides important and convenient service features. And radio data are composed of groups which are divided into 4 blocks with information word and check word. In this paper, radio data receiver is developed which recovers and process radio data to provide services. Then we confirm that 7dB SNR is required to be 10S0-5TBER of demodulation. Deconding process of shortened-cyclic-decoder has been simulated by computer. Also, the time-compression (by 16 times) method has been adopted for the RDS features post-processing. Via the error probability calculation, simulation and experimentation, the developed receiver system is proved to satisfy the system specification of EBU and implemented by general logic gates and analog circuits.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.1
• /
• pp.110-115
• /
• 2000

A K-band GaAs MMIC receiver module has been developed using 0.15 ${\mu}{\textrm}{m}$ HEMT technology process. It incorporates two front end low noise amplifiers, a double balanced diode mixer, and filters. The RF input frequency ranges 20.1 to 21 GHz and the IF output 1.1 to 2 GHz. Test results show an overall conversion gain of more than 27 dB, and less than a 2.2 dB noise figure. The image-rejection ratio greater than 21 dB has been obtained. The isolation between RF and IF ports is better than 27 dB, and between LO and IF is more than 50 dB.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2021.11a
• /
• pp.856-859
• /
• 2021

Image transmission by means of telecommunications is an essential task for information sharing. For considerable distances, wireless channels can be utilized and tuned for proper uses of image data exchange. However, the disturbances that a radio wave encounter during transmission causes partial or total loss of information. Result of such communications is a distorted image at the receiver's end. This paper proposes an auto-encoder architecture as an image enhancement method for narrow-bandwidth radio images. With this method, a distorted image can be improved for better receiver satisfaction. The proposed auto-encoder is trained with many narrow-bandwidth radio image data; hence it enhances a given distorted image. Also, the results were verified with the original image data being the reference images.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.2
• /
• pp.100-105
• /
• 2010

In this paper, a FM radio receiver integrated circuit has been developed based on $0.5{\mu}m$ CMOS process for Zero-Crossing FM demodulator over the 88MHz to 108MHz band. The receiver is designed with the low-IF architecture, and includes Low Noise Amplifier(LNA), Down-Conversion Mixer, Phase Locked Loop(PLL), IF LPF, and a comparator. The measured results of the LNA and Mixer show that the conversion gain of 23.2 dB, the input PldB of -14 dBm, and the noise figure of 15 dB. The measured analog block of the LPF and comparator show the voltage gain of over 89 dB, and the IF LPF can configure the passband from 600KHz to 1.3MHz with 100KHz step through the internal control register banks. The designed FM radio receiver operates at 4.5V with the total current consumption of 15.3mA, so the total power consumption is about 68.85mW. The commercial FM radio has been successfully received.