• Journal of Electrical Engineering and Technology
• /
• v.13 no.6
• /
• pp.2479-2484
• /
• 2018

The filter bank multicarrier modulation (FBMC) technique is one of multicarrier modulation technique (MCM), which is mainly used to improve channel capacity of cognitive radio (CR) network and frequency spectrum access technique. The existing FBMC System contains serial to parallel converter, normal QAM modulation, Radix2 inverse FFT, parallel to serial converter and poly phase filter. It needs high area, delay and power consumption. To further reduce the area, delay and power of FBMC structure, a new clock gating technique is applied in the QAM modulation, radix2 multipath delay commutator (R2MDC) based inverse FFT and unified addition and subtraction (UAS) based FIR filter with parallel asynchronous self time adder (PASTA). The clock gating technique is mainly used to reduce the unwanted clock switching activity. The clock gating is nothing but clock signal of flip-flops is controlled by gate (i.e.) AND gate. Hence speed is high and power consumption is low. The comparison between existing QAM and proposed QAM with clock gating technique is carried out to analyze the results. Conversely, the proposed inverse R2MDC FFT with clock gating technique is compared with the existing radix2 inverse FFT. Also the comparison between existing poly phase filter and proposed UAS based FIR filter with PASTA adder is carried out to analyze the performance, area and power consumption individually. The proposed FBMC with clock gating technique offers low power and high speed than the existing FBMC structures.

• The Journal of the Korea Contents Association
• /
• v.8 no.3
• /
• pp.18-24
• /
• 2008

This paper analyzed Air Interface of EPCglobal's Class-0 that is UHF band protocol among radio environment protocol standard that is used to RFID system. And embodied prescribed anticollision algorithm in protocol. Also, the improved anticollision algorithm for the Class-0 protocol is proposed and performances of anticollision algorithm are compared. Result that compare performance of standard algorithm through simulation with improved algorithm, improved Class-0 algorithm when is tag number 100, reduced 8%, and when is tag number 1000, 12.2%. According as tag number increases, total realization time of improved algorithm decreased more gradually better than prescribed algorithm. Therefore, the improved anticollision algorithm proposed in this paper is advanced method improving the performance of tag recognition in the RFID system and Ubiquitous sensor network.

• Wind and Structures
• /
• v.20 no.6
• /
• pp.739-749
• /
• 2015

Field measurement of wind characteristics is of great significance for the wind engineering community. High-frequency anemometers such as ultrasonic anemometers are widely used to obtain the high-frequency fluctuating wind speed time history. However, conventional instrumentation systems may suffer from low efficiency, non-real time transmission and higher maintenance cost, and thus are not very appropriate in the field measurement of strong winds in remote areas such as mountain valleys. In order to improve the field measurement performance in those remote areas, a wireless high-frequency anemometer instrumentation system for field measurement has been developed. In this paper, the architecture of the proposed instrumentation system, and measured data transmission and treatment will be presented firstly. Then a comparison among existing instrumentation systems and the proposed one is made. It shows that the newly-developed system has considerable advantages. Furthermore, the application of this system to the bridge site located in the mountain valley is discussed. Finally, typical samples of measured data from this area are presented. It can be expected that the proposed system has a great application potential in the wind field measurement for remote areas such as the mountainous or island or coastal area, and hazardous structures such as ultra-voltage transmission tower, due to its real-time transmission, low cost and no manual collection of data and convenience.

• Journal of Satellite, Information and Communications
• /
• v.8 no.4
• /
• pp.135-141
• /
• 2013

Subway in Korea, most of a metropolitan public transport use only worth ten million people a day floating population of wireless communication can be considered HOT SOPT. These three operators' 2G/3G/4G / Wi-Fi / T-DMB frequency and the number of services to co-exist, and the subway train passengers and subway party for operation and management of the communication network is also the co-subway passenger safety and for this service for the effects of mutual interference of whether the verification was necessary. This research and testing different frequency / communication interference between services and testing to determine whether, through the subway authorities and mobile operators in each frequency-specific interaction check and there is no interference to the safety and quality of subway passengers communication services that can be verified as the data was found. The verification methods in the metro area, not just from one region to determine whether the interference with a common verification methods can be applied.

• Journal of Astronomy and Space Sciences
• /
• v.28 no.1
• /
• pp.55-62
• /
• 2011

The precise orbit determination (POD) of low earth orbiter (LEO) has complied with its required positioning accuracy by the double-differencing of observations between International GNSS Service (IGS) and LEO to eliminate the common clock error of the global positioning system (GPS) satellites and receiver. Using this method, we also have achieved the 1 m positioning accuracy of Korea Multi-Purpose Satellite (KOMPSAT)-2. However double-differencing POD has huge load of processing the global network of lots of ground stations because LEO turns around the Earth with rapid velocity. And both the centimeter accuracy and the near real time (NRT) processing have been needed in the LEO POD applications--atmospheric sounding or urgent image processing--as well as the surveying. An alternative to differential GPS for high accuracy NRT POD is precise point positioning (PPP) to use measurements from one satellite receiver only, to replace the broadcast navigation message with precise post processed values from IGS, and to have phase measurements of dual frequency GPS receiver. PPP can obtain positioning accuracy comparable to that of differential positioning. KOMPSAT-5 has a precise dual frequency GPS flight receiver (integrated GPS and occultation receiver, IGOR) to satisfy the accuracy requirements of 20 cm positioning accuracy for highly precise synthetic aperture radar image processing and to collect GPS radio occultation measurements for atmospheric sounding. In this paper we obtained about 3-5 cm positioning accuracies using the real GPS data of the Gravity Recover and Climate Experiment (GRACE) satellites loaded the Blackjack receiver, a predecessor of IGOR. And it is important to reduce the latency of orbit determination processing in the NRT POD. This latency is determined as the volume of GPS measurements. Thus changing the sampling intervals, we show their latency to able to reduce without the precision degradation as the assessment of their precision.

• Journal of Advanced Navigation Technology
• /
• v.13 no.5
• /
• pp.787-792
• /
• 2009

A number of very promising applications such as health monitoring and U-Health of ubiquitous techniques has attracted interest in recent years. Because it can observes the condition of patient from long distance using the equipment which combines with radio communication and medical monitoring system. If it is at emergency situation, it can disposes the condition of the patient. In this paper, we propose the new data format and the transmission communication system of combination medical information with the bluetooth. And we produce the on-board system which transmits the medical information. This system integrated the blood pressure and glucose monitor of personal medical equipment, and the medical information which obtained from on-board system acquires through the gateway with the bluetooth. Medical information is transmitted to the tele-monitor server by the wireline network. We evaluated the proposed system under the laboratory environment and confirmed the excellent performance of transmission of the medical information.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.3
• /
• pp.1263-1269
• /
• 2012

This paper is the research on the heated CWDM optical transmitter for the wavelength compensation at the low temperature. In general, the wavelength deviation of DFB laser is around 0.1 nm/C. The wavelength of DFB laser shifts to longer(shorter) wavelength according to the temperature increase(decrease). Typical CWDM optical communication network has 20 nm channel spacing from reference center wavelength per each channel. There is some limitation problem in the range of operating temperature due to the channel interference. For solving the limited temperature range problem, especially at the low temperature, we use the heater on the DFB laser. As a result, we could realize the CWDM optical transmitter to meet +/-6.5 nm from reference center wavelength in the range of temperature at $-40{\sim}+85^{\circ}C$, which is applicable to the industrial field.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.4
• /
• pp.43-51
• /
• 2010

In this paper, we studied line coding technology tendency for high speed data communication at LED-ID (Identification) communication system in indoor environment. A LED-ID technology is a communication using visible ray (RGB) that come out in LED device. It is energy curtailment effect and possible in ubiquitous network service applications. The LED-ID system has the above advantages about that the communication throughout the whole room is enabled by high power lighting and lighting equipment with white colored LED which are easy to install and have good outward appearance. Therefore, the transmission by light waves is more suitable for wireless networks than by radio waves. We compared with the NRZ, AMI, 4B5B, HDB3, 8B10B line coding for efficient in error detection and serves data transmission of high speed.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.2
• /
• pp.1-8
• /
• 2011

Traffic congestion is a source of significant economic and social costs in urban areas. Intelligent Transportation Systems (ITS) are a promising means to help alleviate congestion by utilizing advanced sensing, computing, and communication technologies. This paper proposes and investigates a basic and advanced ITS framework Advanced Traveler Information System (ATIS) using wireless Vehicle to Roadside (Centralized ATIS model: CA model) and Vehicle to Vehicle (DeCentralized ATIS model: DCA model) communication and assuming an ideal communication environment in the typical $6{\times}6$ urban grid traffic network. Results of this study indicate that an ATIS using wireless communication can save travel time given varying combinations of system characteristics: traffic flow, communication radio range, and penetration ratio. Also, all tested metrics of the CA and DCA models indicate that the system performance of both models is almost identical regardless of varying traffic demand and penetration ratios. Therefore, DCA model can be a reasonable alternative to the fixed infrastructure based ATIS model (CA model).

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.2
• /
• pp.32.3-32.3
• /
• 2016

Available VLBI sources at high frequencies (e.g. >22GHz) are very limited - mainly due to atmospheric fluctuations that degrade coherence time and a power-law energy distribution of particles in case of AGNs. However, simultaneous multi-frequency VLBI receiving system of the Korean VLBI Network (KVN) and its powerful VLBI phase calibration technique offer benefits in finding more weak sources at millimeter wavelengths. Based on this aspect, multi-frequency AGN survey with the KVN (MASK) project, which aims to densify an existing a VLBI catalog of extragalactic radio sources at 22/43/86/129GHz is proposed as a KVN legacy program. We selected 1220 sources of AGNs that include known VLBI sources and new fringe-detected sources using the KVN at K-band (22GHz). Among them, 138 sources were observed as pilot experiments at 22/43/86/129GHz simultaneously and excellent VLBI detection results are achieved. Therefore, we expect that MASK will open a new era in VLBI science at millimeter wavelengths by providing unprecedented number of available sources in the Universe.