• Journal of the Korea Institute of Military Science and Technology
• /
• 제9권4호
• /
• pp.24-31
• /
• 2006

To reduce the interferences between the radio equipments which are operated in frequency hopping mode, the frequency resource should be assigned to each equipment without overlapping when several groups of radio equipments operate in the same area. If the radio equipments are in a different area, the partial frequency overlaying can be permitted. From the isotropic multi-dimensional array, several frequency assignment tables can be extracted for a same area. Also several tables can be extracted for different areas. Since there can be no overlapped frequencies between the tables for the same area, no interference between the radio equipments in an area is guaranteed. The frequencies overlapped between 2 tables for 2 different areas are pre-planed as required. The interference performance in frequency hopping radio can be controlled as desired using the proposed Frequency Resource Assignment Algorithm using Isotropic multi-dimensional Array.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• 제13권2호
• /
• pp.269-273
• /
• 2013

This paper analyzed a potential interference of electric equipments on radio service below 30MHz through an experiment with a PDP(Plasma Display Panel) TV and a RF(Radio Frequency) light bulb in an anechoic chamber. The radiation levels of the PDP TV and the RF light bulb are measured and a combined interference is calculated on the basis of the experimental value. As a result, the combined interference signal level is increased according to the number of interferer. The possibility of a potential interference from electric equipments on radio service below 30MHz is realized through comparison between the measured radiation value of electric equipments and the CISPR(International Special Committee on Radio Interference) 11 limit.

• Journal of Navigation and Port Research
• /
• 제30권5호
• /
• pp.363-367
• /
• 2006

The frequency band $10.5GHz\sim10.7GHz$ provides some of the best angular resolutions using many large and accurate radio telescopes. Developing high performance Bandpass Filter is needed for these equipments to receive low power signals from the space. In this paper, suggests Bandpass Filter for Radio Astronomy equipments. Designed by Microstrip Line for good pass characteristic and suppressing not necessary signals cause of using high frequency. Center frequency is 10.6 GHz and band width is 5% of Center frequency. Manufactured Bandpass Filter is suitable for Radio Astronomy Equipments. Bemuse it matches up to the result by simulate.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 한국항해항만학회 2006년도 춘계학술대회 및 창립 30주년 심포지엄(논문집)
• /
• pp.121-125
• /
• 2006

The frequency band $10.5GHz{\sim}10.7GHz$ provides some of the best angular resolutions that using many large and accurate radio telescopes. Developing high-performanced Bandpass Filter is needed for these equipments receive low power signals from the space. In this paper, Bandpass Filter for Radio Astronomy equipments is proposed. It is designed by Microstrip Line for good pass characteristic and suppressing unwanted signals. Center frequency is 10.6 GHz and band width is 5% of Center frequency. Manufactured Bandpass Filter is suitable for Radio Astronomy Equipments. Because the measured results agree well with the simulation results.

• Journal of the Korea Institute of Military Science and Technology
• /
• 제15권5호
• /
• pp.615-622
• /
• 2012

Airborne radio communications, navigation, and identification equipments are the basic equipment of airplane. Airborne radio communications, navigation, and identification equipments are characterized by user's many quantitative and qualitative requirements. These equipment look like simple test and evaluation, but they have many complex factors. This paper describe the test and evaluation of airborne radio communications, navigation, and identification equipments.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국해양정보통신학회 2002년도 추계종합학술대회
• /
• pp.132-135
• /
• 2002

In radio communication technology, SDR(Software Defined Radio) technology is emerging as a trendy technology for future. SDR is expected to change existing radio systems including central hardware. SDR is equipment that wireless parameters (frequency, modulation, additional service, power level, receive sensitivity, etc.) are controlled by software. In the world, equipments using the new technology are spreading. Not only equipments being imported but also local manufacturers are making this equipment, developing software and offering upgraded service. In the future, as SDR spreads and users choose the service, diverse equipments will be developed through competition and individual development. This diversity of equipment and services will introduce problems in compatibility and interoperation issues. So the government will have to make technical standard for SDR service and will have to make theses standards available to users and manufacturers alike. Therefore I am investigating the elements that can be used to establish these standards.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• 제11권1호
• /
• pp.1-5
• /
• 2011

The brand-new small output radio equipment which is over than 800MHz has an all-in-one interior antenna. We suggested new measuring method and developed related equipment because all-in-one radio equipment's performance evaluation requests old way, which is measuring transmitter output and antenna capacity separately, to be changed. That is, origin of small radio equipments with the 360 degree field measured by measuring the TRP, and also 360 degree opposite reception level measured at the radio equipment by measuring the TIS to make a quantitative evaluation was to be. Furthermore, we made managing frequencies, all-in-one radio equipment's best design and capacity management efficiently by measuring the gain of an antenna mounted on a PCB, the circuit around the genetic material, conductive material on the effects of radiation or the reception level.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• 제12권4호
• /
• pp.31-36
• /
• 2012

In this paper, we proposed spectrum sensing using cooperative relay to solve problem of sensing performance degradation due to CPE (Customer-Premises equipments) which causes low SNR (signal-to-noise ratio) problem. In cooperative communication system, AF (amplify-and-forward) and DF (decoded-and-forward) is widely used for relay mechanism. Also, it is expected that cooperative relay scheme guarantees the high sensing performance by its diversity gain. Based on these backgrounds, in this paper, we apply to cooperative relay scheme to the CR (Cognitive Radio) system, and simulation results show comparison of the sensing performance.

• Journal of Satellite, Information and Communications
• /
• 제7권1호
• /
• pp.7-12
• /
• 2012

In this paper, we proposed spectrum sensing using cooperative relay to solve problem of sensing performance degradation due to CPE (Customer-Primise equipments) which causes low SNR (signal-to-noise ratio) problem. In cooperative communication system, AF (amplify-and-forward) and DF (decoded-and-forward) is widely used for relay mechanism. Also, it is expected that cooperative relay scheme guarantees the high sensing performance by its diversity gain. Based on these backgrounds, in this paper, we apply to cooperative relay scheme to the CR (cognitive radio) system, and simulation results show comparison of the sensing performance between AF and DF.

• Proceedings of the KSR Conference
• /
• 한국철도학회 2002년도 추계학술대회 논문집(I)
• /
• pp.478-483
• /
• 2002

Presently metro in our county has higher rate of passengers as a public transportation of urban area than other transportations. And road is under very restrictive condition to be expanded in many aspects because the streets are completely choked. Therefore increase of capacity in metro and reduction of headway has been seriously required and utmost efforts has been taken by related fields to meet the requirements. The concept of CBTC system came out from this background. CBTC system can be implemented to detect the train location without using the track circuits. It has many advantages in aspects of signalling equipments build-up and maintenance. This study investigated examples of radio communication system and applicable standard norms in other countries. And it also reviewed the suggestion for the establishment of radio frequency and radio network to be considered for application train control system by radio under Korean metro environment.