• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.10
• /
• pp.4177-4190
• /
• 2015

Current research on Internet of Things (IoT) has primarily addressed the means to enhancing smart resource allocation, automatic network operation, and secure service provisioning. In particular, providing satisfactory security service in IoT systems is indispensable to its mission critical applications. However, limited resources prevent full security coverage at all times. Therefore, these limited resources must be deployed intelligently by considering differences in priorities of targets that require security coverage. In this study, we have developed a new application of Cognitive Radio (CR) technology for IoT systems and provide an appropriate security solution that will enable IoT to be more affordable and applicable than it is currently. To resolve the security-related resource allocation problem, game theory is a suitable and effective tool. Based on the Blotto game model, we propose a new strategic power allocation scheme to ensure secure CR communications. A simulation shows that our proposed scheme can effectively respond to current system conditions and perform more effectively than other existing schemes in dynamically changeable IoT environments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5A
• /
• pp.414-420
• /
• 2009

In this paper, we investigate throughput performance of OFDMA-based relay systems according to the "sub-cell coverage configuration" of the base station (RS) and the relay station (RS). RS is exploited for improved quality of the received signal with a tradeoff of additional radio resource consumption which may result in degradation of the throughput performance of the system. Therefore, "radio resource reuse" may be necessary for high performance in relay systems. However, it also causes system performance degradation since resource reuse between RSs incurs channel interference. Therefore, effective resource reuse also should be considered for "high throughput coverage configuration" when relays are employed. We relate the resource reuse patterns of neighboring RSs to sub-cell coverage configuration. We determine the sub-cell coverage of the system depending on the ratio of received signal-interference-noise-ratio (SINR) of the mobile station (MS) from the BS and RS, respectively. Simulations illustrate the throughput performance as the function of SINR ratio, and it has different optimal point depending on the resource reuse patterns. Therefore, the "resource reuse pattern" and the "effective sub-cell coverage configuration" should be considered together for the high throughput performance of the relay system.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.1
• /
• pp.32.2-32.2
• /
• 2010

The Korean Solar Radio Burst Locator (KSRBL) is a single dish radio spectrograph, which is designed to record the spectra of microwave (0.5 - 18 GHz) bursts with 1 MHz spectral resolution and 1 s time cadence, and locate their positions on the solar disk within 2 arcmin. It was installed at KASI in 2009 August, and operational thereafter. The antenna pointing coefficients were initially determined during the installation and refined later using a series of antenna pointing calibrations. The filter to prevent the radio frequency interference around 2 GHz was designed and is to be installed. After the installation, the full frequency coverage will be recovered from the temporarily restricted frequency coverage (5 - 14 GHz). Also an effort to solve a couple of minor problems for the full performance of the system is in progress.

• Journal of Advanced Navigation Technology
• /
• v.19 no.6
• /
• pp.630-635
• /
• 2015

Since, the existing analog village broadcasting system had been affected by the climate change such as rain and had some problems likes as short range, it had been changed to the digital system and its standardizations required to be developed from now. In order to deploy the efficient digital wireless village broadcasting system, some propagation profiles as well as service coverages should be analyzed in various radio environments. In this paper, we have set up the transmission power as a parameter and estimated the service coverage area ratio as well as the area ratio interfered into the nearby village in rural, suburban and urban environments using spectrum management intelligence system (SMIS). This paper provides the basic data to establish a standard using the radio propagation characteristics and received power for village broadcasting system in various environments.

• Journal of Communications and Networks
• /
• v.16 no.3
• /
• pp.335-343
• /
• 2014

This paper considers the crucial problem of deploying wireless relays for achieving a connected wireless sensor network in indoor environments, an important aspect related to the management of the sensor network. Several algorithms have been proposed for ensuring full sensing coverage and network connectivity. These algorithms are not applicable to indoor environments because of the complexity of indoor environments, in which a radio signal can be dramatically degraded by obstacles such as walls. We first prove theoretically that the indoor relay placement problem is NP-hard. We then predict the radio coverage of a given relay deployment in indoor environments. We consider two practical scenarios; wire-connected relays and radio-connected relays. For the network with wire-connected relays, we propose an efficient greedy algorithm to compute the deployment locations of relays for achieving the required coverage percentage. This algorithm is proved to provide a $H_n$ factor approximation to the theoretical optimum, where $H_n=1+{\frac{1}{2}}+{\cdots}+{\frac{1}{n}}={\ln}(n)+1$, and n is the number of all grid points. In the network with radio-connected relays, relays have to be connected in an ad hoc mode. We then propose an algorithm based on the previous algorithm for ensuring the connectivity of relays. Experimental results demonstrate that the proposed algorithms achieve better performance than baseline algorithms.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.2
• /
• pp.231-236
• /
• 2016

The stability of DGPS signal in the DGPS service area was measured and the service availability according to the receiving signal strength was analyzed in this paper. Based on the effects of radio wave propagation in the seasons of winter and summer, daytime and night, the method to provide the DGPS service coverage was presented in this paper. The signal's strength of DGPS radio wave were measured at a constant distance from the DGPS reference station during a constant period. The propagation of DGPS radio wave is affected by status of ground conductivity, so the DGPS service area is dependant on the ground conductivity. To provide the stable service coverage, it is necessary to apply the adaptive power control for receiving signal's variations and the antenna design for alleviation of high elevation's radiation.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.11a
• /
• pp.417-417
• /
• 2004

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.9B
• /
• pp.876-882
• /
• 2009

In this paper, we propose a sub-cell coverage control algorithm for enhancement of the cell throughput in OFDMA based relay systems. Relay station (RS) is exploited for improved quality of the received signal in cellular communication systems, especially in shadow areas. However, since a RS requires additional radio resource consumption for the link between the base station (BS) and the RS, we have to carefully control the coverage areas if a mobile station (MS) is serviced via the BS or the RS considering the cell throughput. We consider radio resource reuse as well for the sub-cell coverage configuration by applying various reuse patterns between RSs. We also consider a time varying system by adaptively changing the threshold for coverage depending on the MSs' traffic in the cell. We initially determine the sub-cell coverage of the system depending on the ratio of received signal-interference-noise-ratio (SINR) of the MS from the BS and RSs, respectively. Then, the "sub-cell coverage threshold" varies based on the "effective transmitted bits per sub-channel" with time. Simulation result shows that the proposed "time varying coverage control algorithm" leads to throughput improvement compared to the fixed sub-cell coverage configuration.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.165-168
• /
• 1998

This paper describes the characteristics of CT-2 radio wave propagation at 900MHz range. Typical cell coverage of CT-2 based on picocellular design provides a 200m radius. The five sites of urban regions of Kwang Ju city were chosen to characterize propagation in various environments. On the basis of cell coverage data measured with field strength meter, average 75% of telepoint service was retained and it was lack 25% of overall gain. In some sites telepoint service was limited to two of four directions around a station. If specially designed collinear antenna with specific directivities are used in these shadow area, improved results will be acquired.

• Journal of Communications and Networks
• /
• v.7 no.2
• /
• pp.104-114
• /
• 2005

This work presents a concept and the related analysis of the traffic performance for a wireless broadband system based on fixed relay stations acting as wireless bridges. The analysis focuses on the important performance indicators end-to-end throughput and delay, taking into account the effects of an automated repeat request protocol. An extension to a MAC frame based access protocol like IEEE 802.11e, 802.15.3, 802.16a, and HIPERLAN2 is outlined and taken as basis for the calculations. The system is intended for both dense populated areas as an overlay to cellular radio systems and to provide wide-area broad-band coverage. The two possible deployment scenarios for both dense urban and wide-area environments are introduced. Analytical and validating simulation results are shown, proving the suitability of the proposed concept for both of the mentioned scenarios. It is established that the fixed relaying concept is well suited to substantially contribute to provide high capacity cellular broad-band radio coverage in next generation (NG) cellular wireless broadband systems.