• Journal of the Microelectronics and Packaging Society
• /
• v.17 no.3
• /
• pp.43-49
• /
• 2010

Direct printing technology is an attractive metallization method, which has become immerging as "Green technology" to the conventional photolithography, on account of low cost, simple process and environment-friendliness. In order to commercialize the printed electronics in industry, it is essential to evaluate the electrical properties of conductive circuits using direct printing technology. In this contribution, we focused on the electrical characteristics of inkjet-printed circuits. A Cu nanoink was inkjet-printed onto a Bisaleimide triazine(BT) substrate with parallel transmission line(PTL) and coplanar waveguide(CPW) type, then was sintered at $250^{\circ}C$ for 30 min. We calculated the resistivity of printed circuits through direct current resistance by the measurement of I-V curve: the resistivity was approximately 0.558 ${\mu}{\Omega}{\cdot}cm$ which is about 3.3 times that of bulk Cu. Cascade's probe system in the frequency range from 0 to 30 GHz were employed to measure the Scattering parameter(S-parameter) with or without a gap between the substrate and the probe station chuck. The result of measured S-parameter showed that all printed circuits had over 5 dB of return loss in the entire frequency range. In the curve of insertion loss, $S_{21}$, showed that the PTL type circuits had better transmission of radio frequency (RF) than CPW type.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.1
• /
• pp.23-32
• /
• 2008

In the VHF range, active antennas are widely used for wideband applications due to their small size. Active antenna consists of antenna elements and amplifiers, which are directly connected to each other. Gain and noise-figure characteristics are very important for good sensitivity performance, because it is located at the front end of a receiving system. In this study, we developed an active dipole antenna with 5:1 bandwidth(100${\sim}$500 MHz), which consists of a dipole antenna and a P-HEMT amplifier. To obtain required performances, the antenna and the amplifier should be designed simultaneously. In order for that, we introduced an equivalent port concept to model the 1-port dipole antenna as an equivalent 2-port system. Using the proposed equivalent port, the performance of the active dipole antenna was simulated by the ADS. In order to measure the gain and noise-figure characteristics of the antenna, we utilized the same concept of the two-port equivalent impedance model. The measurement results for typical gain, NF and VSWR in the required frequency band were 8dBi, 9dB and 1.7:1, respectively. The radiation patterns at the principal planes were same as the typical radiation pattern of a dipole antenna. By comparing the simulation results with measured ones, it is confirmed that the proposed methods works well.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.6 no.2
• /
• pp.376-389
• /
• 2000

The Purpose of this study was to grasp the status of drug uses in college students, and to investigate the knowledge and attitude when they use it. We collected through questionnaires from Sep. 1 to Oct. 30 in 1999. The subjects were 490 college students in Seoul and northern of the Kyunggi-do. The data analysis was performed using SPSS (version 7.0) and ANOVA. The results of this study were as follows. 1. There was no correlation for all factors in the relationship between general characteristics of subjects and knowledge for drugs. On the contrary, in the relation of the general characteristics and attitude for drug of subjects, some factors are statistically significant e.g., department (F=3.049, p<.010), satisfaction for school life (F=6.167,p<.002), body shape(F=8.092, p<.000), and the relationship with ones parents (F=3.728, p<.005). 2. In the analysis of drug use status and knowledge, only in the factor of administration control was statistically significant(F=4.304, p<.014) and in the relation of attitude for drug uses, drug administration was statistically significant (F=4.521, p<.004). 3. In the mean scores for the drug knowledge analysis, the highest factor was 'A narcotic make deformed persons through poisoning of physical and mental' (M=4.14), the lowest factor was 'If catch the flu during the pregnancy, should be take drug as possible as quickly to reduce negative effect for fetal' (M=1.94). 4. In the analysis for drug attitude, the highest factor was 'A drug is alike a poison' (M=3.48), 'Should be keep the usage and dosage of drug' was the lowest (M=1.48). 5. From the investigation for status of drug use, it was revealed that the most subjects (73.6%) were purchase drugs after explain their symptoms to pharmacist. And they take drugs only when they felt painful in 43.1%. The most students (70.4%) were experienced control of drug administration. It was inquired that subjects were mainly obtained information about drugs from pharmacist and television (or radio) advertisement, 33.5% and 33.1%, respectively. In the examination for existence of long-term administrators in their family, 'none' and 'only parents' are 49.6% and 37.3%, respectively. When their parents have illness, the persons go to drugstore and hospital for heath-care, 47.8% and 44.3%, respectively. On the basis of results of this study, we suggest as follows. 1. This study was analyzed data from questionnaires for college students in a part of local areas, so we suggest that the next research should be perform for national-wide students as subjects to generalize the results. 2. It is need more intensive research methodologies such as interview and observation. 3. Additional research is required for knowledge and behaviors of drug uses that will how impact on ones health behavior.

• Korean journal of communication and information
• /
• v.56
• /
• pp.237-256
• /
• 2011

The goal of this study is to examine consumers' cognition for the corporate social responsibility(CSR) and opinion to practical use of CSR on advertising (ex. corporate PR) in situation that CSR is treated with long-term and continuous activity in strategic marketing. The results of survey in this study are, first, the best effective method of CSR to introduce is TV or radio program placed first, internet came second, and followed by advertising. But the cognition process of CSR is internet palaced first in frequency. Thus it is very important to use of new media as a internet with regard to CSR. Second, respondents have thought positively about CSR and to practical use of CSR on advertising. But respondents answered that CSR is not enough though it's importance. Therefore marketers of companies is needed to transfer direction of CSR accord with consumers' liking and taste. Third, consumers have recognized that CSR in connection with characteristics core business of the companies. It is, image of company is not detached with CSR, more effective that CSR reflected characteristics of the company. Fourth, consumers have thought to active for CSR that the companies they like. Finally, these results are showed that is important brand management and corporate image management in strategic and macroscopic level include CSR.

• Korean Journal of Plant Resources
• /
• v.29 no.1
• /
• pp.128-135
• /
• 2016

This study examined radiation damage and the optimal gamma-ray dose for mutation breeding in oat (Avena sativa L. cv. Samhan). The seed germination rate decreased as the dose increased over 500 Gy. The median lethal dose (LD₅₀) was approximately 392 Gy. The median reduction dose (RD₅₀) for plant height, tiller number, root length, and flash weight was 411, 403, 394, and 411 Gy, respectively. The optimal dose of gamma irradiation for inducing oat mutation appears to be in the range 300-400 Gy. We performed the comet assay to observe nuclear DNA damage induced by gamma-ray irradiation. This assay showed a clear difference with gamma-ray treatments. DNA damage increased temporarily 7 days after treatment depending on the dose, while no significant difference was identified in response to 300 Gy 30 days after the gamma-ray treatments. The growth characteristics of the M₂ generation decreased as the dose increased over 400 Gy.

• Journal of Astronomy and Space Sciences
• /
• v.34 no.4
• /
• pp.237-244
• /
• 2017

Magnetic flux ropes, often observed during intervals of interplanetary coronal mass ejections, have long been recognized to be critical in space weather. In this work, we focus on magnetic flux rope structure but on a much smaller scale, and not necessarily related to interplanetary coronal mass ejections. Using near-Earth solar wind advanced composition explorer (ACE) observations from 1998 to 2016, we identified a total of 309 small-scale magnetic flux ropes (SMFRs). We compared the characteristics of identified SMFR events with those of normal magnetic cloud (MC) events available from the existing literature. First, most of the MCs and SMFRs have similar values of accompanying solar wind speed and proton densities. However, the average magnetic field intensity of SMFRs is weaker (~7.4 nT) than that of MCs (~10.6 nT). Also, the average duration time and expansion speed of SMFRs are ~2.5 hr and 2.6 km/s, respectively, both of which are smaller by a factor of ~10 than those of MCs. In addition, we examined the geoeffectiveness of SMFR events by checking their correlation with magnetic storms and substorms. Based on the criteria Sym-H < -50 nT (for identification of storm occurrence) and AL < -200 nT (for identification of substorm occurrence), we found that for 88 SMFR events (corresponding to 28.5 % of the total SMFR events), substorms occurred after the impact of SMFRs, implying a possible triggering of substorms by SMFRs. In contrast, we found only two SMFRs that triggered storms. We emphasize that, based on a much larger database than used in previous studies, all these previously known features are now firmly confirmed by the current work. Accordingly, the results emphasize the significance of SMFRs from the viewpoint of possible triggering of substorms.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.62-62
• /
• 2008

As micro-system move toward higher speed and miniaturization, requirements for embedding the passive components into printed circuit boards (PCBs) grow consistently. They should be fabricated in smaller size with maintaining and even improving the overall performance. Miniaturization potential steps from the replacement of surface-mount components and the subsequent reduction of the required wiring-board real estate. Among the embedded passive components, capacitors are most widely studied because they are the major components in terms of size and number. Embedding of passive components such as capacitors into polymer-based PCB is becoming an important strategy for electronics miniaturization, device reliability, and manufacturing cost reduction Now days, the dielectric films deposited directly on the polymer substrate are also studied widely. The processing temperature below $200^{\circ}C$ is required for polymer substrates. For a low temperature deposition, bismuth-based pyrochlore materials are known as promising candidate for capacitor $B_2Mg_{2/3}Nb_{4/3}O_7$ ($B_2MN$) multi layers were deposited on Pt/$TiO_2/SiO_2$/Si substrates by radio frequency magnetron sputtering system at room temperature. The physical and structural properties of them are investigated by SEM, AFM, TEM, XPS. The dielectric properties of MIM structured capacitors were evaluated by impedance analyzer (Agilent HP4194A). The leakage current characteristics of MIM structured capacitor were measured by semiconductor parameter analysis (Agilent HP4145B). 200 nm-thick $B_2MN$ muti layer were deposited at room temperature had capacitance density about $1{\mu}F/cm^2$ at 100kHz, dissipation factor of < 1% and dielectric constant of > 100 at 100kHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.6 s.121
• /
• pp.602-611
• /
• 2007

In this paper, the forward link of UHF RFID system is modeled in accordance with the EPCglobal class 1 generation 2(EPCglobal C1G2) UHF Radio-Frequency Identity protocol specification at $860{\sim}960MHz$. Based on the constructed model, characteristics on the forward link signal for the EPCglobal C1G2 RFID reader are simulated with the help of a MATLAB softwarein order to extract the design parameters of a transmit digital filter which meets the Korean RFID regulations. Herein, the forward link model is consisted of PIE source coding, transmit digital filter, modulation, local oscillator, and antenna. From the simulation results, the ranges of three design parameters(roll-off factor, cutoff frequency, the number of tabs) for transmit digital filter are obtained with different modulation techniques and the Tari(type a reference interval) values. Finally, DSB/SSB-ASK modulation technique can not satisfy the EPCglobal C1G2 specification when Tari equals to $6.25{\mu}sec$ in a multiple-reader environment. Consequently this paper can provide a guideline for design parameters of a RFID reader as well as the basic scheme of analyzing frequency interference problems in RFID environments, including multiple-reader and dense-reader environments.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.4
• /
• pp.406-412
• /
• 2019

In this paper, we propose two algorithms for classifying services with similar delay characteristics into three classes and allocating radio resources according to priority in LTE-A system where H2H and M2M services coexist. The first is to allocate resources from the higher priority class to the lower priority class, and each class gives priority to H2H over M2M, and the other is to give priority to H2H regardless of delay characteristics except for the class with the highest priority. The RA success probability was analyzed according to the access rate(${\alpha}$) of M2M devices in each class. In comparison with the conventional systems, it was improved from 0.5 to 0.52 for ${\alpha}_{2M}=0.05$ in two classes. In the three classes, the success probability was slightly increased from 0.5 to 0.57 for ${\alpha}_{2M}={\alpha}_{3M}=1$ and from 0.5 to 0.58 for ${\alpha}_{2M}=0.5$ and ${\alpha}_{3M}=0.1$. Although 6 services are considered in the proposed scheme, the RA success probability is almost similar to the previous scheme because the average arrival rate of H2H of each class is set to the same.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.4
• /
• pp.31-45
• /
• 2020

The objective of this study was to understand the characteristics of Chinese cultural industry shown in the analysis of a successful IP martial arts stage play 'Seongeomg ihyeopjeon' that applied martial arts as Chinese traditional culture. The cultural industry of Chin a has modified the relevant legislation since China's reform and opening up in 1979, and the term 'intellectual property rights(IP)' was used in the Chinese laws for the first time in 2008. Thus, transcending the instrumental scope for maintaining the regime in the past, the culture was regarded as an economic profit industry and a representative industry for strengthening the soft power of traditional culture. The results of analysis on the stage play are as follows. First, the Chinese cultural industry has been developed by support policies for strengthening the soft power of Chinese-characteristic traditional culture and overseas expansion through the state-led modification of relevant legislation. Second, the Chinese cultural industry is including its unique traditional cultural factors, and the succe ssful marke ting results could be obtained only when the high awareness and many fans are secured. Third, for the inflow of audiences through the work advertising, it would be preferentially needed to analyze various opinions of fans through active SNS communications with them instead of the existing advertising such as TV, radio, and newspaper, and also to reflect the national cultural industry policies and producers' opinions.